A VIN decoder reads the 17-character vehicle identification number of a car, truck or motorcycle and tells you what the number says about it: the make, model and model year, the body type, the engine, the transmission and the plant where it was built. Enter the VIN and press Decode, and the tool looks it up in the free vPIC database of the US National Highway Traffic Safety Administration, NHTSA, and shows the result.
How to use the VIN decoder
- Find the VIN. It is normally in the lower corner of the windscreen on the driver's side, or inside the door pillar on the driver's side, and it is on the registration papers.
- Type or paste the 17 characters. Spaces and hyphens are ignored.
- If you know it, enter the model year, which NHTSA recommends sending with the VIN.
- Press Decode and read the details.
What a VIN is
The VIN is a 17-character code of capital letters and digits that identifies one vehicle. It never uses the letters I, O or Q, which are easy to confuse with the digits 1 and 0. The first three characters are the world manufacturer identifier. Characters 4 to 9 describe the vehicle, and the ninth is a check digit that is compulsory in North America. The tenth character gives the model year and the eleventh the plant. The last six characters are the serial number of the vehicle. The standard is described on the Wikipedia page for the vehicle identification number, and the codes are defined in ISO 3779.
Where the data comes from
The tool uses NHTSA's vPIC service, which is free for the public to use, needs no registration and says that it has no daily limit on the number of requests. The lookup goes from your browser straight to NHTSA, so this site never sees the VIN that you enter. The service says that it decodes about 99 percent of vehicles from the 1995 model year on, and a lower share, in the range of 60 to 65 percent, for the model years from 1980 to 1994. It does not have data before 1980. A vehicle made for another market is included only if its maker has registered it with NHTSA for sale or use in the United States.
Reading the result
The result starts with a line such as the model year, the make and the model. Under it is a table of the details that NHTSA has, for example the trim, the body class, the number of cylinders, the size of the engine, the fuel, the transmission, the weight class and the plant. NHTSA says that a missing value only means that it has no data about that item, and that it should not be taken to mean that the vehicle lacks the feature. Not every vehicle has every field. If NHTSA has a comment on the VIN, for example that the check digit does not calculate, the tool shows it under the table.
The check digit and error messages
NHTSA's answer carries a message. A VIN that decodes cleanly with a correct check digit is reported as clean. Other messages say that the check digit does not calculate properly, which usually means a mistyped character, that the VIN is incomplete, that the model year in the VIN does not match the one you gave, or that no detailed data is available. If you see such a message, check the VIN against the vehicle and type it again.
What a VIN decoder cannot tell you
The decoder reports how the manufacturer described the vehicle when it was built. It does not show the history of the vehicle, such as accidents, owners, mileage or recalls, and it cannot tell whether a particular car has been modified. Use a vehicle history report and an inspection when you buy a used vehicle, and treat the decoder as a way to check that the vehicle matches what the seller says.
Using the decoder when buying a vehicle
When you look at a used vehicle, decode the VIN from the vehicle itself and from the papers. If the make, model, year or engine that the decoder shows do not match what the seller says, ask why. Check that the VIN on the windscreen, on the door pillar and on the papers is the same. A mismatch is a reason to stop and look more closely. The decoder is a quick first check and does not replace a history report or an inspection by a mechanic.
The model year code
The tenth character of the VIN is a code for the model year. The codes run through letters and digits in a cycle of thirty years, which is why a 2010 vehicle and a 1980 vehicle can share a code. For cars and light trucks, the seventh character helps to tell them apart: a digit there points to the years 1980 to 2009, and a letter points to 2010 to 2039. If your VIN is for an older vehicle, adding the model year to the lookup helps NHTSA to choose the right range.
Motorcycles, trailers and heavy vehicles
The decoder also works for many motorcycles, trailers, buses and heavy trucks, and the table shows the fields that NHTSA has for them. The fields differ by type of vehicle, so you may see fewer details than you do for a car.
Common mistakes
- Typing the letters I, O or Q. They are never used in a VIN.
- Leaving out a character. A VIN has exactly 17.
- Expecting a full history. The decoder gives the build details only.
- Treating a blank field as a missing feature. It may only be missing data.
What next
Use this often? Add VIN Decoder to your Home screen.
Frequently asked questions
What is a VIN decoder?
A tool that reads a 17-character vehicle identification number and shows what it says about the vehicle: make, model, year, body, engine and plant.
Where do I find the VIN?
Normally in the lower corner of the windscreen on the driver's side, or inside the driver's door pillar. It is also on the registration papers.
Where does the data come from?
From NHTSA's free vPIC database. The lookup goes from your browser straight to NHTSA, not through this site.
Why does the decoder say the check digit does not calculate?
The ninth character is a check digit. A message like that usually means that a character was mistyped, so check the VIN again.
Does a VIN decoder show the vehicle's history?
No. It shows the build details only. Use a vehicle history report for accidents, owners and mileage.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.