A body fat calculator estimates how much of your body weight is fat. All you need is a tape measure. Enter your height and your neck and waist measurements, plus your hips if you’re female, and you’ll get your estimated body fat percentage and its category. Add your weight to see your fat mass and lean mass too. This is an estimate for general information, and it isn’t a medical diagnosis.
The US Navy body fat formula
This calculator uses the circumference equations developed by James Hodgdon and Marcie Beckett at the Naval Health Research Center in the 1980s. All measurements are in inches:
Men: body fat % = 86.010 × log10(waist − neck) − 70.041 × log10(height) + 36.76
Women: body fat % = 163.205 × log10(waist + hip − neck) − 97.684 × log10(height) − 78.387
If you enter centimeters, the calculator converts them to inches first. Fat mass is your weight multiplied by your body fat percentage, and lean mass is the rest of your weight.
How to measure yourself
Careful measuring matters more than anything else here, because a small slip can change your result by a percentage point or more. Use a flexible tape, keep it level and snug without pressing into your skin, and measure on bare skin.
- Height: stand straight against a wall, without shoes.
- Neck: measure just below your Adam’s apple or voice box, angling the tape slightly downward toward the front.
- Waist (men): measure around your belly at the level of your navel, after a normal breath out.
- Waist (women): measure at the narrowest part of your waist, after a normal breath out.
- Hips (women): measure around the widest part of your hips and buttocks.
Take each measurement twice, and use the average if they differ.
How to use this body fat calculator
- Choose your sex and units. The formulas differ for men and women, because of differences in typical body composition.
- Enter your height and measurements. The hip box appears only for the female formula.
- Add your weight if you like. It’s optional, and it’s used only for fat mass and lean mass.
- Read your result. You’ll see your percentage, your category and where you sit on the scale.
Worked examples
Male: height 5 ft 10 in (70 in), neck 15 in, waist 34 in. Waist minus neck is 19. The formula gives 86.010 × 1.2788 − 70.041 × 1.8451 + 36.76 = 17.5%, in the Fitness range. At 170 lb, that’s about 29.8 lb of fat and 140.2 lb of lean mass.
Female: height 5 ft 5 in (65 in), neck 13 in, waist 30 in, hips 38 in. Waist plus hips minus neck is 55. The formula gives 163.205 × 1.7404 − 97.684 × 1.8129 − 78.387 = 28.6%, in the Average range.
Body fat percentage chart
These ranges are widely used and are credited to the American Council on Exercise (ACE):
| Category | Women | Men |
|---|---|---|
| Essential fat | 10–13% | 2–5% |
| Athletes | 14–20% | 6–13% |
| Fitness | 21–24% | 14–17% |
| Average | 25–31% | 18–24% |
| Obese | 32% and up | 25% and up |
Essential fat is the amount your body needs to work normally, and women need more of it than men. Staying at or below this level isn’t a goal to aim for.
How accurate is the Navy method?
It’s a useful estimate, but it isn’t a lab test. A 2022 study of US Marines compared it with DXA scans, one of the standard lab methods. The formula read about 2.5 percentage points low for men on average and 1.3 to 2.3 points high for women, and individual results varied by more. It also tended to read too high in very lean people and too low in people with more body fat. The formula can’t see where your fat is, either.
The best use of a body fat calculator is to track your own trend over time, measuring the same way and at the same time of day, rather than to focus on a single number. Slow, steady changes across several weeks tell you more than any one reading.
Body fat vs. BMI
Body mass index uses only your height and weight, so it can’t tell muscle from fat. A muscular person can have a high BMI and little body fat. Body fat percentage looks at your body’s makeup more directly, and the two work well together. Try our BMI calculator for a second view.
When to speak with a doctor
This tool doesn’t apply well during pregnancy, or to children and teens, and it doesn’t account for a medical condition. If you’re worried about your weight or health, or planning a big change in your diet or exercise, speak with a doctor or registered dietitian. They can consider your full health picture.
Worked example in metric units
Choose Metric, select Female and enter a height of 165 cm, a neck of 33 cm, a waist of 76 cm and hips of 97 cm. The calculator converts each measurement to inches, then runs the female formula. The result is 28.7%, which falls in the Average range for women. Add a weight of 62 kg and you also see a fat mass of 17.8 kg and a lean mass of 44.2 kg. Lean mass here means everything that isn’t fat, including muscle, bone, organs and water.
How much one centimeter changes the result
Take a man who is 178 cm tall with a 38 cm neck. With an 85 cm waist, the calculator gives 16.5%, in the Fitness range. With 86 cm, it gives 17.3%. With 87 cm, it gives 18.0%, which moves him into the Average range. So a waist reading that is off by a single centimeter can shift the answer by almost a full point and even change the category. This is why the tape should sit at the same spot each time, and why a trend over several weeks says more than one reading.
What next
Use this often? Add Body Fat to your Home screen.
Frequently asked questions
How does this body fat calculator work?
It uses the US Navy circumference formula, which estimates body fat from your height and your neck and waist measurements, plus your hips for women.
What is a healthy body fat percentage?
It depends on your sex, age and activity level. In commonly used ACE ranges, fitness levels are 14–17% for men and 21–24% for women, and average levels are 18–24% for men and 25–31% for women.
How accurate is a tape measure body fat test?
It’s a reasonable estimate that can be off by a few percentage points. One study comparing it with DXA scans found average differences of about 1 to 3 points, with larger differences for some individuals.
Why do women need a hip measurement?
The US Navy formula for women includes hips because women tend to store more fat there, and adding it improves the estimate.
Do I have to enter my weight?
No. The percentage doesn’t use your weight. It’s only needed to show your fat mass and lean mass.
What’s better, body fat percentage or BMI?
They measure different things. BMI is quick but can’t tell muscle from fat, while body fat percentage estimates your body’s makeup. Using both gives you a fuller picture.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.