To convert centipoise to pascal seconds, multiply the number of centipoise by 0.001. Both are units of dynamic viscosity, so the relationship between them never changes. One centipoise is 0.001 Pa·s. Enter a value and this viscosity converter gives the answer straight away, with the same amount in poise, millipascal seconds, reyns and the US pound units in the table; swap the units to turn pascal seconds back into centipoise.
Viscosity formula
Pascal seconds = centipoise × 0.001
To go the other way, multiply pascal seconds by 1,000 to get centipoise. Because the factor is fixed, the answer is the same every time and you can reverse the conversion without losing accuracy.
How to use the viscosity converter
- Enter the viscosity in centipoise. Decimals are fine.
- Check the units. From is centipoise and To is pascal seconds. Press Swap units to convert pascal seconds to centipoise, or pick any other unit from the lists.
- Read the result, with the same value in every other viscosity unit in the table below.
Worked example
Olive oil has a viscosity of about 56.2 millipascal seconds at 26 °C, which is 56.2 centipoise. Multiply by 0.001 to get 0.0562 Pa·s. Going the other way, 2 pascal seconds × 1,000 = 2,000 cP.
Centipoise to pascal seconds conversion chart
These values cover amounts commonly converted between centipoise and pascal seconds.
| Centipoise (cP) | Pascal seconds (Pa·s) |
|---|---|
| 1 cP | 0.001 Pa·s |
| 5 cP | 0.005 Pa·s |
| 10 cP | 0.01 Pa·s |
| 50 cP | 0.05 Pa·s |
| 100 cP | 0.1 Pa·s |
| 250 cP | 0.25 Pa·s |
| 500 cP | 0.5 Pa·s |
| 1,000 cP | 1 Pa·s |
| 5,000 cP | 5 Pa·s |
| 10,000 cP | 10 Pa·s |
What is viscosity?
Viscosity is a fluid's resistance to flowing: honey is far more viscous than water. Dynamic viscosity, also called absolute viscosity and written μ, measures how much force it takes to make layers of a fluid slide past each other. It's the quantity this converter handles. A related quantity, kinematic viscosity, is the dynamic viscosity divided by the fluid's density and has different units, described below.
The units of dynamic viscosity
- Pascal second (Pa·s). The SI unit, also written newton second per square meter (N·s/m²) or kilogram per meter per second.
- Poise (P). The CGS unit, named after Jean Léonard Marie Poiseuille. One poise is 0.1 pascal second.
- Centipoise (cP). A hundredth of a poise, used especially in ASTM standards. It's handy because water at 20 °C is about 1 cP, and one centipoise is exactly one millipascal second (mPa·s).
- Pound per foot second, lb/(ft·s). A US unit; NIST gives it as about 1.488 pascal seconds.
- Pound-force second per square foot, lbf·s/ft². About 47.88 pascal seconds, the same size as a slug per foot second.
- Reyn, lbf·s/in². A British unit equal to about 6,894.76 pascal seconds, used in lubrication engineering.
Typical viscosities
These everyday values, in millipascal seconds (the same number in centipoise), show how widely viscosity varies:
| Substance | Viscosity (mPa·s) | Temperature |
|---|---|---|
| Water | About 0.89 | 25 °C |
| Mercury | 1.526 | 25 °C |
| Whole milk | 2.12 | 20 °C |
| Olive oil | 56.2 | 26 °C |
| Honey | About 2,000 to 10,000 | 20 °C |
| Ketchup | About 5,000 to 20,000 | 25 °C |
Viscosity changes strongly with temperature, so always note the temperature with a measurement. Most liquids get thinner as they warm up.
Dynamic or kinematic viscosity?
Kinematic viscosity is measured in square meters per second, or in stokes (St) and centistokes (cSt). One centistoke is one square millimeter per second. To turn centipoise into centistokes you divide by the fluid's density in grams per cubic centimeter, which is why the two numbers are close for water, whose kinematic viscosity at 20 °C is about 1 cSt. For oils and syrups the density isn't 1, so the numbers differ. This converter is for dynamic viscosity only, so check which kind a data sheet gives before converting.
Estimating in your head
Centipoise and millipascal seconds are the same number. To get pascal seconds, move the decimal point three places left, so 250 cP is 0.25 Pa·s. To get poise, move it two places left, so 250 cP is 2.5 P.
Where viscosity units are used
Different industries prefer different units. Paint, ink, adhesive and food makers often quote centipoise, because the numbers for everyday liquids are easy to read. Engineers and scientists working in SI units use pascal seconds or millipascal seconds. Lubrication and bearing calculations in older US and British references sometimes use the reyn, and some fluid-flow tables in US customary units give pound per foot second or pound-force second per square foot. Because every one of these units measures the same thing, a single factor converts each to the others, and the table under the result shows all of them at once. When a data sheet doesn't say which unit it uses, look for the symbol: cP, mPa·s and Pa·s are dynamic viscosity, while cSt and St are kinematic viscosity.
Common mistakes
- Mixing up cP and cSt. They're only equal for a fluid as dense as water.
- Forgetting the temperature. A viscosity without a temperature is hard to compare.
- Confusing poise with pascal seconds. One pascal second is 10 poise.
- Using lb/(ft·s) for lbf·s/ft². They differ by a factor of about 32.
What next
Use this often? Add Viscosity to your Home screen.
Frequently asked questions
How does the viscosity converter work?
It multiplies by a fixed factor from the units' exact definitions. One centipoise is exactly 0.001 pascal seconds, and every other unit is converted the same way.
How many pascal seconds are in a centipoise?
One centipoise is 0.001 pascal seconds, which is one millipascal second.
Is centipoise the same as mPa·s?
Yes. One centipoise equals exactly one millipascal second, so the numbers are the same.
Can this viscosity converter turn cP into cSt?
No. Centistokes measure kinematic viscosity. Divide centipoise by the fluid's density in g/cm³ to get centistokes.
What is the viscosity of water in centipoise?
About 1 cP at 20 °C and about 0.89 cP at 25 °C.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.