Saved

Press the star next to a tool's name to save it.

All my tools

Force Calculator

Enter any two of force, mass and acceleration to find the third, in US or metric units.

Restored your last values ·

Your result opens on the next page.

Force

100 lbf

Enter your values to see the result.

See full result

Force formula

Newton’s second law says the force on an object equals its mass times its acceleration.

F = m × a

m = F ÷ a

a = F ÷ m

In metric, force is in newtons when mass is in kilograms and acceleration is in meters per second squared. One newton is the force that speeds up 1 kg by 1 m/s every second.

Worked examples

Metric: a 10 kg object accelerating at 3 m/s² needs 10 × 3 = 30 N.

US: a 100 lb mass accelerating at 32.174 ft/s², which is standard gravity, has a force of about 100 lbf, or 444.8 N. That’s why weight on Earth in pounds-force matches mass in pounds.

Pounds of mass and pounds of force

“Pound” can mean two things. A pound of mass (lb) measures how much matter something has, and a pound-force (lbf) measures a push or pull. So in US units, F = m × a needs a conversion, which the calculator does for you.

Unit conversions

UnitEquals
1 lbf4.448 N
1 kN1,000 N
1 lb0.4536 kg
1 ft/s²0.3048 m/s²
1 g9.807 m/s², or 32.174 ft/s²

What this leaves out

This gives the net force needed for that acceleration. Real problems may also involve friction, drag or other forces, so it’s not for checking safety on lifting gear or structures.

How to use the force calculator

  1. Choose what to find. Under “What do you want to find?”, pick Force, Mass or Acceleration. The box for that value disappears, and you fill in the other two.
  2. Enter the mass and pick its unit: lb or kg.
  3. Enter the acceleration and pick its unit: ft/s², m/s² or g, where 1 g is standard gravity.
  4. Enter the force, when you are finding mass or acceleration, and pick N or lbf.
  5. Press Calculate. Your result opens on the next page.

The big figure is in US units: pounds-force, pounds or feet per second squared. Under it, a line shows the sum in metric units, such as 1,500 kg × 2.5 m/s² = 3,750 N. The table then gives the answer in every unit the tool offers. Values are shown to three decimal places, and kilonewtons to four. Every value you enter must be above 0.

Worked example: pushing a car

How much net force does it take to speed up a 1,500 kg car at 2.5 m/s²? Choose Force, enter 1500 with kg and 2.5 with m/s².

  • Force: 1,500 kg × 2.5 m/s² = 3,750 N
  • In pounds-force: 843.034 lbf
  • In kilonewtons: 3.75 kN

This is the net force only. Rolling resistance and air drag push back on a real car, so the engine has to supply more than this.

Worked examples: finding mass and acceleration

Finding mass. A steady net force of 500 N gives an object an acceleration of 2 m/s². Choose Mass, enter 500 N and 2 m/s². The mass is 500 ÷ 2 = 250 kg, which the tool also shows as 551.156 lb.

Finding acceleration. A net force of 200 lbf acts on a 150 lb object. Choose Acceleration, enter 200 lbf and 150 lb. The tool first converts to metric: 889.644 N ÷ 68.039 kg = 13.076 m/s². That is 42.899 ft/s², or 1.333 g. The g figure makes sense: 200 lbf is a third more than the object’s own weight of 150 lbf, so the acceleration is a third more than gravity.

The units behind the numbers

The newton is the SI derived unit of force. The NIST Guide to the SI lists it with the symbol N and expresses it in base units as m · kg · s⁻², a meter times a kilogram per second squared.[2] That is why a mass in kilograms times an acceleration in m/s² gives newtons with no extra factor.

US units need conversion factors. NIST’s table of conversion factors gives 1 pound-force as 4.448 222 newtons, 1 pound (avoirdupois) as 0.453 592 4 kilograms, and 1 foot per second squared as 0.3048 meters per second squared.[3] The calculator turns every input into kilograms, meters per second squared or newtons, does the sum in metric, then converts the answer back for the table. It uses these same factors with a few more digits.

The g unit is standard gravity. NIST’s CODATA listing gives the standard acceleration of gravity as 9.806 65 m/s², and marks it as exact, because it is a fixed value by definition.[4] The same figure appears in NIST’s conversion table.[3]

Working out weight with the force calculator

Weight is the force of gravity on a mass, so you can find it here. Choose Force, enter the mass and set the acceleration to 1 g. A 70 kg person weighs 70 × 9.80665 = 686.465 N, or 154.324 lbf. Enter 150 lb at 1 g and you get exactly 150 lbf, which is how the pound-force is set up.

Local gravity on Earth varies a little with place and height, so a real scale reading can differ slightly from the standard figure. For the speed and distance of a falling object, try the free fall calculator. For unit swaps alone, use the force converter or weight converter.

Common mistakes with F = ma

  • Mixing up lb and lbf. Pounds of mass go in the Mass box with lb. A push or pull measured in pounds goes in the Force box with lbf.
  • Picking g when you mean ft/s². 1 g is about 32.174 ft/s², so mixing them up changes the answer about 32 times.
  • Using a speed instead of an acceleration. Acceleration is a change in speed per second. Work it out first with the acceleration calculator.
  • Entering a negative value for braking. The tool takes sizes only, above 0. Enter the size of the slowdown and keep track of the direction yourself.

What next

Use this often? Add Force to your Home screen.

Frequently asked questions

How do I calculate force?

Multiply mass by acceleration. A 10 kg object accelerating at 3 m/s² has a force of 30 N.

How many newtons are in a pound of force?

One pound-force is about 4.448 newtons.

What is the difference between mass and weight?

Mass is how much matter something has. Weight is the force of gravity on that mass, so it changes on other planets while mass doesn’t.

How many newtons does 1 kg weigh on Earth?

At standard gravity, 9.80665 newtons. Choose Force and enter 1 kg and 1 g: the tool rounds it to 9.807 N, or 2.205 lbf. Real gravity varies slightly from place to place.

Can I enter a negative acceleration?

No. Every value must be above 0. For braking or slowing down, enter the size of the deceleration and treat the direction separately.

What is a kilonewton?

A kilonewton is 1,000 newtons. The calculator shows force in kN too, so 3,750 N appears as 3.75 kN.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools