A magnitude of acceleration calculator finds how large an acceleration is, whether you know its components, the change in velocity over a time, or the net force and the mass. The result is shown in metres per second squared, feet per second squared and multiples of standard gravity.
How to use the magnitude of acceleration calculator
- Choose US or metric units.
- Choose what you know.
- Fill in the values.
- Press Calculate.
What acceleration is
Acceleration is the rate at which velocity changes. Its simplest measure is the average acceleration, ā = Δv ÷ Δt, the change in velocity divided by the time taken [1]. Because velocity has a direction, acceleration is a vector too, and its magnitude is the size of that vector without the direction. That size is what this calculator reports.
Magnitude from components
When the acceleration is given as components, the magnitude follows from the distance formula. In two dimensions |a| = √(aₓ² + a_y²), and in three dimensions |a| = √(aₓ² + a_y² + a_z²) [1]. If you enter only x and y, the calculator also gives the direction of the vector, measured from the positive x axis.
A worked example
For components of 3 and 4 metres per second squared, the magnitude is √(9 + 16) = 5 metres per second squared. That is 16.4042 feet per second squared, using the conversion 1 foot per second squared = 0.3048 metres per second squared [1], and 0.509858 g. The direction is 53.13 degrees from the x axis. This example is our own, as the source page gives no worked problems.
Using velocity and time
If you know the change in velocity, enter the starting velocity, the final velocity and the time. A car that goes from rest to 88 feet per second, which is 60 miles per hour, in 4 seconds has an acceleration of 22 feet per second squared, which is 6.7056 metres per second squared. If the answer would be negative, the velocity falls along the line of motion, and the calculator tells you, but it still reports the magnitude.
Using force and mass
Newton's second law says that the acceleration is proportional to the net force and inversely proportional to the mass, so a = F ÷ m [1]. A net force of 50 newtons on a mass of 10 kilograms gives 5 metres per second squared. Remember that the force must be the net force: the sum of all the forces on the body, after friction and other resistances are taken off.
Pounds and feet
In US mode the force is in pounds-force and the mass in pounds. Dividing one by the other gives a number that is a multiple of standard gravity, so we multiply by 32.174 feet per second squared, which the source page lists as the value of standard gravity in those units [1]. This conversion is our own working. A force of 50 pounds-force on 10 pounds gives 160.87 feet per second squared.
Standard gravity
Accelerations are often compared with gravity. One standard gravity, g₀, is 9.80665 metres per second squared [1]. An acceleration of 5 metres per second squared is therefore about 0.51 g. The calculator shows the multiple of g in every result, which helps you judge how large the figure is.
Constant acceleration only
The velocity and time mode gives the average acceleration over the interval. It equals the instantaneous value only when the acceleration is constant. If the acceleration changes during the interval, a shorter interval gives a better estimate. The component mode and the force mode give the value at the moment that the components or the force apply.
Units and conversions
In metric mode, enter velocities in metres per second, forces in newtons and masses in kilograms. In US mode, use feet per second, pounds-force and pounds. Results always appear in both unit systems. Time is always in seconds, so convert minutes and hours before you enter it. Use the speed converter if your velocities are in miles per hour or kilometres per hour.
Using the calculator
Pick the units and the mode, fill in the boxes that appear and press Calculate. The result line gives the magnitude in three units, and the working line shows the formula with your numbers. Try the same acceleration in all three modes to check that you get the same size: 3 and 4 as components, 5 metres per second in 1 second, and 50 newtons on 10 kilograms.
Reading the result
The first line gives the magnitude in three forms: metres per second squared, feet per second squared and multiples of standard gravity. The second line shows the formula with your numbers, so you can check each step by hand. For the component mode with only two components, the working line also gives the direction of the vector in degrees from the positive x axis, which the magnitude alone does not show.
Checking the answer
A quick check is to compare the size with something familiar. An acceleration of 1 g is about 9.8 metres per second squared, so a result of 0.5 g means that the body speeds up by about 5 metres per second in every second. If your result is far larger or smaller than you expect, look first at the units of the time and of the force.
Common mistakes
- Using the wrong unit for the force. US mode takes pounds-force.
- Entering the total force instead of the net force. Subtract friction first.
- Entering the time in minutes. Use seconds.
- Reading a negative change as an error. It means the body slows down.
What next
Use this often? Add Magnitude of to your Home screen.
Frequently asked questions
What is a magnitude of acceleration calculator?
A tool that finds the size of an acceleration from its components, a velocity change and a time, or a force and a mass.
How do you find the magnitude of acceleration from components?
Take the square root of the sum of the squares of the components.
What is the formula for average acceleration?
a = Δv ÷ Δt, the change in velocity over the time taken.
How many metres per second squared is one g?
One standard gravity is 9.80665 m/s².
Can the acceleration be negative?
The magnitude cannot, but a change in velocity can be negative when the body slows down.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.