A series inductors calculator adds up the inductances of coils connected in series, and the same tool finds the equivalent inductance of coils in parallel. Type the values, choose series or parallel and the unit, and get the single inductor that would act like the group. Parallel inductors and series inductors both work with up to 50 values.
How to use the series inductors calculator
- Choose series or parallel.
- Pick the unit for the values.
- Type the inductances, separated by commas, spaces or new lines.
- Press Calculate.
Inductors in series
When inductors are connected in series, the total inductance is the sum, Leq = L₁ + L₂ + … + Lₙ. The same current flows through every inductor in series, although the voltage across each one can differ [1]. Three inductors of 5, 10 and 15 henries give 30 henries. Three inductors of 10 millihenries give 30 millihenries. The total is always larger than the largest single inductor.
Inductors in parallel
For inductors in parallel, the reciprocal of the total is the sum of the reciprocals, 1 ÷ Leq = 1 ÷ L₁ + 1 ÷ L₂ + … + 1 ÷ Lₙ [1]. This has the same form as the formula for parallel resistors. The total is always smaller than the smallest inductor, since each branch gives the current one more path. This is the case that a parallel inductors calculator solves.
A worked example in parallel
With 5, 10 and 15 henries in parallel, the reciprocals add to 1 ÷ 5 + 1 ÷ 10 + 1 ÷ 15 = 11 ÷ 30. The total is 30 ÷ 11, or about 2.7 henries. The calculator shows 2.7273 henries. Choose the parallel option and enter 5, 10, 15 to see it. The result is smaller than 5, the smallest of the three, as it must be.
Two inductors in parallel
For two inductors in parallel, the formula simplifies to L = L₁ L₂ ÷ (L₁ + L₂), the product over the sum. This follows by algebra from the reciprocal rule, and the result text shows it when you enter two values. For 10 and 40 millihenries, the total is 400 ÷ 50 = 8 millihenries. Two equal inductors in parallel always give half the value of one.
The mutual coupling condition
These simple relationships hold true only when there is no mutual coupling of magnetic fields between the individual inductors [1]. If the coils are wound close together on one core, or placed near each other, their fields interact and a term for the mutual inductance is needed. The sources we read do not give a formula for coupled networks, so this calculator does not cover them.
Units and prefixes
Choose henries, millihenries, microhenries or nanohenries, so that you can type the values as they are printed on the parts. The calculator converts them to henries, does the sum, and writes the answer in the most readable unit. One millihenry is 0.001 henry, one microhenry is a millionth of a henry and one nanohenry is a billionth. All the values must be in the same unit.
Real coils
An ideal inductor has no resistance, but real coils do: the winding resistance appears as a resistance in series with the inductor [1]. The series resistance of a coil adds when coils are connected in series, and it combines like parallel resistors when they are in parallel. The self-resonance and the core saturation of a real inductor also change its behaviour at high frequency and high current. The calculator gives the ideal inductance only.
Why combine inductors
You may need a value that is not made as a single part, or you may need a coil that can carry more current, or you may want to build a value from the parts in a drawer. Connecting two equal inductors in series doubles the inductance, and connecting them in parallel halves it. The calculator helps to choose a combination that gets close to the value that a circuit needs.
Entering the values
Type the values in any order. You can separate them with commas, spaces, semicolons or new lines, and decimals such as 4.7 are fine. At least two values are needed, and each value must be above zero. If you make a mistake, the tool says so. You can enter up to 50 values, which is enough for any practical group of inductors.
Using the calculator
Choose the connection, pick the unit and type the values. Check the result against the rule of thumb: the series total is above the largest value, and the parallel total is below the smallest. Compare the two connections for the same parts to see how different they are. For mixed circuits, work out the groups one at a time and use the answer as one value.
A practical example with real values
Suppose that a circuit needs 15 millihenries and you have only 10 millihenry inductors. Two in series give 20 millihenries, which is too much, and two in parallel give 5. A 10 millihenry coil in series with two 10 millihenry coils in parallel gives 15 millihenries, since the parallel pair is 5 and the series total is 10 plus 5. Enter 10 and 10 in parallel, then enter the result with 10 in series, to see it. This is our own example and it uses only the two rules above. It shows how groups are reduced step by step, and the same method works for any mixed arrangement that has no mutual coupling. Always check the current rating of each part in the real circuit.
Common mistakes
- Using the parallel formula for series coils. Series values are added.
- Mixing mH and µH. Use one unit for all values.
- Ignoring mutual coupling. The formula assumes none.
- Forgetting the coil resistance. Real inductors have some.
What next
Use this often? Add Series Induc to your Home screen.
Frequently asked questions
What is a series inductors calculator?
A tool that adds the inductances of coils connected in series, and also combines coils in parallel.
How do I find the total inductance in series?
Add the values: L = L₁ + L₂ + … + Lₙ.
How do I find the total inductance in parallel?
Add the reciprocals and take the reciprocal of the sum.
Does the formula work for coupled inductors?
No. It holds only when the magnetic fields do not couple.
What is the total of 5, 10 and 15 henries in parallel?
About 2.7 henries, which is 30 divided by 11.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.