This free fall calculator works out how long an object takes to fall, how far it drops and how fast it's travelling when it lands. Enter the height of the drop, or the time the object spends falling, and choose US or metric units. The result gives the speed at the end of the fall, with the fall time, the distance and the speed in miles or kilometers per hour. It assumes the object starts from rest and that nothing but gravity acts on it, which is the standard model taught in physics.
What is free fall?
In classical mechanics, free fall is any motion of a body where gravity is the only force acting upon it. A freely falling object doesn't have to be moving straight down, but the simplest case is an object dropped from rest, and that's the one this calculator covers. Near the Earth's surface, gravity makes a falling object speed up at a steady rate of about 9.81 meters per second every second, which is about 32.2 feet per second every second.
Free fall formulas
For an object dropped from rest, with no air resistance:
Speed = g × time
Distance = ½ × g × time²
Time = √(2 × distance ÷ g)
Here g is the acceleration due to gravity. The calculator uses the standard value of 9.80665 m/s², which is 32.174 ft/s².
How to use the free fall calculator
- Choose your units: US or metric.
- Choose what you know: the height of the drop, or the fall time.
- Enter the value.
- Press Calculate.
Worked example
A ball is dropped from a height of 100 ft. The fall time is √(2 × 100 ÷ 32.174), which is 2.493 seconds. The speed at the end is 32.174 × 2.493 = 80.22 ft/s, or 54.69 mph. In metric units, an object dropped from 20 m takes 2.02 seconds and lands at 19.81 m/s, which is 71.3 km/h. Going the other way, something that falls for 3 seconds drops 144.78 ft and reaches 96.52 ft/s.
Does a heavier object fall faster?
Not in free fall. The formulas above don't include the object's mass, so a heavy object and a light one fall together when gravity is the only force. This was shown in a famous demonstration on the Moon. On 2 August 1971, the astronaut David Scott released a hammer and a feather at the same time, and they hit the surface together. There's also a well-known tale that Galileo dropped unequal masses from the Leaning Tower of Pisa, although it may be apocryphal, and most of his real observations used balls rolling down ramps. Even earlier, in 1551, Domingo de Soto was the first to state that a body in free fall accelerates uniformly.
Why real objects fall more slowly
On Earth, air pushes back on a falling object, and the push grows as the object speeds up. Eventually the air resistance balances the weight, and the object stops accelerating. The steady speed that it reaches is called its terminal velocity. For a human skydiver, terminal velocity is around 53 m/s, which is 190 km/h or 118 mph. A skydiver in a spread-eagle position reaches it after about 12 seconds, having fallen about 450 m, or 1,500 ft. The calculator's ideal model has no such limit, so its speeds keep rising with height.
When the ideal model is a good guide
- Short drops of dense objects. A stone, a ball or a tool falling a few stories behaves almost exactly as the formulas say.
- School physics problems, which nearly always ignore air resistance.
- Estimating a height. Time a stone's fall into a well and enter the time to estimate the depth.
It's a poor guide for light or wide objects such as feathers, paper and parachutes, and for very long falls, where air resistance has time to take over.
Gravity on the Moon
The value of g isn't the same everywhere. Lunar gravity is about 1.63 m/s², roughly a sixth of the Earth's. An object dropped on the Moon therefore falls much more slowly, and with almost no air to slow it, the simple formulas work very well there. This calculator uses the Earth's standard gravity only.
Estimating a height from a fall time
You can use free fall to measure a height that you can't reach with a tape. Drop a small, dense object such as a pebble, and time how long it takes to land. Choose Fall time, enter the seconds, and read the distance fallen. A fall of 2 seconds means a drop of about 64 ft, or 19.6 m. Time several drops and use the average, because a small timing error makes a large difference: the distance depends on the square of the time. Only do this where nobody can be underneath.
Common mistakes
- Mixing units. Use feet with 32.174 ft/s², or meters with 9.80665 m/s². The calculator does this for you.
- Forgetting to square the time. Doubling the time gives four times the distance.
- Expecting real-world accuracy for long falls. Air resistance matters more as the speed grows.
- Using it for a thrown object. The formulas here assume the object starts from rest.
Related calculators
For a thrown or launched object, use the projectile motion calculator. Work out speed from distance and time with the velocity calculator, and find a force with the force calculator.
What next
Use this often? Add Free Fall to your Home screen.
Frequently asked questions
How does the free fall calculator work?
It uses speed = g × time and distance = ½ × g × time² for an object dropped from rest, with standard gravity and no air resistance.
How long does it take to fall 100 feet?
About 2.49 seconds without air resistance, reaching about 80 ft/s, or 55 mph.
How far does an object fall in 3 seconds?
About 144.8 ft, or 44.1 m, if air resistance is ignored.
Do heavy objects fall faster than light ones?
Not when gravity is the only force. On the Moon, a hammer and a feather dropped together landed at the same time.
What is terminal velocity?
It's the steady speed a falling object reaches when air resistance balances its weight. For a skydiver it's around 53 m/s.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.