Saved

Press the star next to a tool's name to save it.

All my tools

Dilution Calculator

Enter the strength of your stock and the strength you want to see how much stock and water to mix.

Restored your last values ·

%
%

Your result opens on the next page.

Result

3.2 fl oz

Enter your values to see the result.

See full result

Dilution formula

When you add water, the amount of the active ingredient stays the same, and only the total volume changes. That gives the dilution equation.

C₁ × V₁ = C₂ × V₂

C₁ = stock strength, V₁ = stock volume, C₂ = final strength, V₂ = final volume

Worked example

You have a 10% stock and want 16 fl oz at 2%. The stock you need is 2 × 16 ÷ 10 = 3.2 fl oz. Add 16 − 3.2 = 12.8 fl oz of water, for a ratio of 1:4.

How to use this calculator

  1. Choose what to find. Pick stock needed, final volume or final strength.
  2. Enter the other values. Use the same type of strength throughout, such as percent.
  3. Read your result. You’ll see how much stock and water to mix.

Ratios and “parts”

A 1:4 ratio here means 1 part stock to 4 parts water, which is 5 parts in total. Some product labels instead mean 1 part in 5 parts total when they say 1:5, so check how yours is written before you mix.

Stay safe

Follow the product label and its safety sheet, as they come before any calculator. Wear suitable protection for what you’re handling. In a lab, add acid to water, never water to acid. Never mix cleaning products with each other, as some produce dangerous gases. This tool doesn’t tell you whether a strength is safe to use, and it isn’t for medicine doses, so ask a pharmacist or clinician about those.

Three things the dilution calculator can find

The question at the top, “What do you want to find?”, picks which of the four values in C₁ × V₁ = C₂ × V₂ is missing. You enter the other three, and the calculator solves for the last one.

ChooseYou enterIt works out
Stock neededStock strength, final strength, final volumeV₁ = C₂ × V₂ ÷ C₁
Final volumeStock strength, stock volume, final strengthV₂ = C₁ × V₁ ÷ C₂
Final strengthStock strength, stock volume, final volumeC₂ = C₁ × V₁ ÷ V₂

Pick the volume unit from the list: fluid ounces, cups, gallons, milliliters or liters. Every volume in the result uses that same unit, so the calculator never has to convert between them.

Worked example: making a set amount

You have a 5% stock solution and need 1,000 mL of a 0.5% solution. Choose Stock needed, enter 5 for stock strength, 0.5 for final strength and 1000 for final volume, and set the unit to milliliters.

  • Stock: 0.5 × 1,000 ÷ 5 = 100 mL
  • Water to add: 1,000 − 100 = 900 mL
  • Stock to water: 100 to 900, shown as 1:9

Measure the 100 mL of stock, then add water until the total reaches 1,000 mL. A measuring jug or volumetric flask marked at the final volume makes this easy, because you fill to the line instead of measuring the water separately.

Worked example: using up what you have

Sometimes the stock volume is fixed. Say you have 100 mL of an 8.25% stock and want a 1% solution. Choose Final volume and enter 8.25, 100 and 1. The final volume is 8.25 × 100 ÷ 1 = 825 mL, so you add 725 mL of water. The stock to water ratio is 1:7.25.

To check what strength a mix already has, choose Final strength. Mixing 50 mL of a 10% stock into a total of 250 mL gives 10 × 50 ÷ 250 = 2%, with 200 mL of water and a ratio of 1:4.

Dilution factor

The dilution factor says how many times weaker the final solution is than the stock. It equals the final volume divided by the stock volume, which is the same as the stock strength divided by the final strength. In the first example, 1,000 ÷ 100 = 10, and 5 ÷ 0.5 = 10, so it is a tenfold dilution. A tenfold dilution has a stock to water ratio of 1:9, not 1:10, because the stock itself is one of the ten parts. For several dilutions in a row, use the serial dilution calculator.

How to read the result

  • Stock is how much of the strong solution to measure out.
  • Water to add is the final volume minus the stock. This assumes the two volumes simply add up, which is close enough for most everyday mixing.
  • Final volume is the total you end up with.
  • Final strength is shown as a percent.
  • Volumes are shown with up to three decimal places, so round them to what your measuring cup or cylinder can read.
  • Stock to water is rounded to two decimal places and only appears when you add some water.

Limits of the dilution calculator

The calculator only dilutes. It won’t let the final strength be higher than the stock, and it won’t let the final volume be smaller than the stock volume, because adding water can’t make a solution stronger. Every value must be above zero. Strength can be any unit as long as both strengths use it, so you can enter grams per liter or parts per million in the percent boxes and the volumes still come out right. Only the label in the result says percent. To change between units of strength, try the ppm converter or the concentration calculator, and for moles per liter, the molarity calculator.

Common dilution mistakes

  • Swapping the two strengths. C₁ is always the stronger stock, and C₂ is what you want to end up with.
  • Adding the final volume of water. If you need 1,000 mL in total, add water up to 1,000 mL, not 1,000 mL of water on top of the stock.
  • Mixing strength types. Don’t compare a weight-based percent on one label with a volume-based percent on another.
  • Reading a ratio the wrong way. Check whether a label means parts of water or parts in total before you mix.

What next

Use this often? Add Dilution to your Home screen.

Frequently asked questions

How do I calculate a percent dilution?

Use C1 × V1 = C2 × V2. To make 16 fl oz at 2% from a 10% stock, you need 2 × 16 ÷ 10 = 3.2 fl oz of stock, plus 12.8 fl oz of water.

What does a 1:4 dilution mean?

Here, it means 1 part stock to 4 parts water. Some labels mean 1 part in 4 parts total, so check how yours is written.

Can I use this for medicine?

No. Ask a pharmacist or clinician about medicine doses and dilutions.

What is the dilution factor of my mix?

Divide the final volume by the stock volume. Making 1,000 mL from 100 mL of stock is a dilution factor of 10, which is the same as 5% stock diluted to 0.5%.

Can I use the dilution calculator with ppm or g/L?

Yes. Enter both strengths in the same unit and the volumes come out right. The result labels the strength as a percent, so read it in your own unit.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools