A ppm converter changes a concentration between parts per million, parts per billion, parts per trillion, percent, and milligrams or micrograms per litre of water. Enter the value, choose the unit you have and the unit you want, and the answer appears with the other units listed beneath it.
What does ppm mean?
Parts per million (ppm) is one part in 1,000,000 parts, or a value of 10⁻⁶. Wikipedia describes parts-per notation as a set of pseudo-units used for very small values of dimensionless quantities such as mole fraction or mass fraction. Parts per billion (ppb) is one in 1,000,000,000, or 10⁻⁹, and parts per trillion (ppt) is one in a trillion, or 10⁻¹². Percent is one part in 100, a value of 10⁻².
The conversion factors
| Unit | As a fraction | Equal to |
|---|---|---|
| 1 % | 0.01 | 10,000 ppm |
| 1 ppm | 0.000001 | 0.0001 %, 1,000 ppb |
| 1 ppb | 0.000000001 | 0.001 ppm, 1,000 ppt |
| 1 ppt | 0.000000000001 | 0.001 ppb |
To go from ppm to percent, divide by 10,000. To go from percent to ppm, multiply by 10,000. To go from ppm to ppb, multiply by 1,000.
How to use the ppm converter
- Enter the number you want to convert.
- Choose the starting unit in the From box.
- Choose the unit you want in the To box.
- Press Calculate to see the result and a table of the other units.
ppm to mg/L in water
When you work with water or dilute aqueous solutions it is common to assume that water has a density of 1.00 g/mL, so that 1 kg of water is the same as 1 litre. On that assumption, 1 ppm corresponds to 1 mg/L and 1 ppb corresponds to 1 µg/L. This is why water test kits, water quality reports and aquarium guides use ppm and mg/L as if they were the same unit. The converter offers mg/L and µg/L for that reason, and labels them as units for water.
Worked examples
- 5 ppm is 0.0005 %, or 5,000 ppb.
- 1,000 ppm is 0.1 %, and 10,000 ppm is 1 %.
- 2.5 mg/L of a substance in water is 2.5 ppm.
- 500 ppb is 0.5 ppm, or 0.00005 %.
- 0.5 % is 5,000 ppm.
Mass, mole and volume ppm are not always the same
Parts-per notation does not say what is being counted. A value can be a mass fraction, a mole fraction or a volume fraction, and Wikipedia recommends writing units out in full, such as mg/kg, µmol/mol or µL/L, to avoid confusion. The page states that the difference is quite significant for gases. As an illustration, a mass fraction of 1 ppb of CFC-11 in air is a different mole fraction, because the molar mass of CFC-11 is 137.368 and that of air is 28.97, a factor of about 4.74. For liquids and solids that are mostly water, the difference can usually be ignored, which is what this converter assumes.
When to use each unit
Percent suits larger concentrations such as a 2 % solution. Ppm suits trace amounts such as chlorine in a pool, minerals in drinking water and nutrients in soil. Ppb and ppt suit contaminants measured in tiny amounts. If you want to prepare a solution at a given strength rather than convert a unit, the dilution calculator and molarity calculator may help.
How much to add for a target ppm
For water-like liquids, the mass of a substance needed for a target concentration is the ppm value times the volume in litres, divided by 1,000, in grams. To reach 5 ppm in 200 litres you need 5 × 200 ÷ 1,000 = 1 gram. One ppm in a 1,000-litre tank needs exactly 1 gram. The same sum works in the other direction: 3 grams in 1,500 litres is 2 ppm.
Getting a feel for the size
One part per million is one second in about 11.6 days. One part per billion is one second in about 31.7 years. These comparisons show why ppb and ppt are used for contaminants that are measured in vanishingly small amounts, and why a figure such as 10,000 ppm, which is only 1 percent, can still be a lot of material when the batch is big.
Scientific notation
In scientific notation, 1 ppm is 1 × 10⁻⁶, 1 ppb is 1 × 10⁻⁹ and 1 ppt is 1 × 10⁻¹². Percent is 1 × 10⁻². The converter multiplies your value by the starting unit's fraction and divides by the target unit's fraction, so the answer is exact up to the precision shown.
Reading a lab or water report
A test report may list a result in mg/L, ppm or ppb depending on the laboratory. When you compare two reports, convert them to the same unit first. A result of 0.05 mg/L is 0.05 ppm, which is 50 ppb, so a limit written as 50 ppb and a reading written as 0.05 ppm are the same number. The converter makes this check quick and shows the result in every unit at once.
Common mistakes
- Moving the decimal point the wrong way. Going from ppm to percent makes the number smaller by 10,000.
- Using mg/L for gases. The water assumption does not hold.
- Confusing ppb and ppt. They differ by a factor of 1,000, and in some countries a trillion has a different meaning.
What next
Use this often? Add PPM to your Home screen.
Frequently asked questions
How do you use a ppm converter for percent?
Divide by 10,000. For example, 5,000 ppm is 0.5 %, and 1,000 ppm is 0.1 %.
How do you convert percent to ppm?
Multiply by 10,000. A 2 % concentration is 20,000 ppm.
Is ppm the same as mg/L?
For water and dilute water-based solutions, yes: assuming a density of 1.00 g/mL, 1 ppm is 1 mg/L and 1 ppb is 1 µg/L. For other liquids and for gases it is not.
How many ppb are in a ppm?
One ppm is 1,000 ppb. One ppb is 0.001 ppm.
Are ppm, mg/kg and µL/L the same?
Mass-based ppm equals mg/kg, while volume-based ppm for a gas equals µL/L. They are the same ratio of 10⁻⁶, but they count different things, so write the unit out when it matters.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.