To convert US gallons per minute to liters per minute, multiply the number of gallons per minute by 3.7854. Both measure volumetric flow rate, so the relationship never changes. One US gallon per minute is 3.7854 L/min. Enter a value and this flow rate converter gives the answer at once, with the same flow in cubic meters per second and hour, liters per second and hour, cubic feet per minute and second, gallons per hour and day, imperial gallons and oil barrels per day in the table.
Flow rate formula
Liters per minute = US gallons per minute × 3.7854
To go the other way, multiply liters per minute by 0.264172 to get US gallons per minute. Because the factor is fixed, the conversion is exact and can be reversed without losing accuracy.
How to use the flow rate converter
- Enter the flow in US gallons per minute. Decimals are fine.
- Check the units. Press Swap units to convert liters per minute to gallons per minute, or choose any other flow unit from the lists.
- Read the result, with the same flow in every other unit in the table below.
Worked example
A garden hose fills a bucket at 5 US gallons per minute. Multiply by 3.7854 to get 18.9271 L/min. Going the other way, 30 liters per minute × 0.264172 = 7.9252 gal/min.
Gallons per minute to liters per minute conversion chart
These values cover flows commonly converted between US gallons per minute and liters per minute.
| US gallons per minute (gal/min) | Liters per minute (L/min) |
|---|---|
| 1 gal/min | 3.7854 L/min |
| 2 gal/min | 7.5708 L/min |
| 5 gal/min | 18.9271 L/min |
| 10 gal/min | 37.8541 L/min |
| 20 gal/min | 75.7082 L/min |
| 50 gal/min | 189.2706 L/min |
| 100 gal/min | 378.5412 L/min |
| 200 gal/min | 757.0824 L/min |
| 500 gal/min | 1,892.7059 L/min |
| 1,000 gal/min | 3,785.4118 L/min |
What is volumetric flow rate?
Volumetric flow rate, also called volume flow rate, is the volume of fluid that passes per unit of time, usually written Q. Its SI unit is the cubic meter per second (m³/s). It contrasts with mass flow rate, the other main kind of fluid flow rate; when people talk about the rate of fluid flow, they usually mean the volumetric rate. In hydrometry, the study of water flow in rivers and streams, the volumetric flow rate is called discharge. In US customary and imperial units, flow is often given in cubic feet per second or gallons per minute.
The units in this converter
- Metric: cubic meters per second and per hour, liters per second, minute and hour, and milliliters per minute.
- US customary: cubic feet per second (cfs) and per minute (cfm), and US gallons per minute (gpm), per hour and per day.
- Imperial: imperial gallons per minute, which are larger than US gallons.
- Oil and gas: barrels per day, using the 42-US-gallon oil barrel.
The factors come from exact definitions. NIST lists the same values, for example a cubic foot per minute as about 0.4719 liters per second and a US gallon per minute as about 0.06309 liters per second.
Where flow units are used
- Plumbing and irrigation: faucets, showerheads, pumps and sprinklers are rated in gallons or liters per minute.
- HVAC: fans and ventilation are sized in cubic feet per minute or cubic meters per hour.
- Rivers and dams: discharge is measured in cubic feet per second or cubic meters per second.
- Medicine and labs: infusion pumps and lab equipment use milliliters per minute.
- Oil production: output is reported in barrels per day.
US or imperial gallons?
A US gallon is about 3.785 liters and an imperial gallon about 4.546 liters, so a flow in imperial gallons per minute is about 20% larger than the same number in US gallons. Check which gallon a pump or appliance uses before you convert; equipment sold in the United States uses US gallons.
Estimating in your head
One US gallon per minute is a little under 4 liters per minute, so multiply by 4 and take off about 5% for a quick estimate: 10 gpm is close to 38 L/min.
Choosing a pump or fixture
When you compare pumps, faucets, filters or irrigation parts, convert every flow rate to the same unit first. A pump made in Europe may be rated in cubic meters per hour or liters per minute, while one made in the United States is usually rated in gallons per minute. Converting both to one unit shows at a glance which delivers more water. Remember that the rated flow is usually measured at a stated pressure, so the real flow depends on your pipes and pressure too.
Flow and time
To find how long a job takes, divide the volume by the flow rate. A 500-gallon tank filled at 10 gallons per minute takes 50 minutes. Make sure the volume and the flow use the same unit of volume first, converting liters to gallons or the other way round if needed.
Common mistakes
- Mixing US and imperial gallons.
- Confusing flow with volume. Flow is volume per unit of time.
- Using the wrong time unit, such as per hour instead of per minute.
- Confusing volume flow with mass flow, which depends on density.
What next
Use this often? Add Flow Rate to your Home screen.
Frequently asked questions
How does the flow rate converter work?
It multiplies by fixed factors from the units' exact definitions. One US gallon per minute is 3.785411784 liters per minute.
How many liters per minute is 1 gallon per minute?
One US gallon per minute is about 3.785 liters per minute.
What is the SI unit of flow rate?
The cubic meter per second (m³/s).
What is cfm in liters per second?
One cubic foot per minute is about 0.4719 liters per second.
Is an imperial gallon the same as a US gallon?
No. An imperial gallon is about 4.546 liters and a US gallon about 3.785 liters.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.