Standard US mattress sizes
| Size | Inches (W × L) | Centimeters | Best for |
|---|---|---|---|
| Twin | 38 × 75 | 97 × 191 | Children, bunk beds, small rooms |
| Twin XL | 38 × 80 | 97 × 203 | Teens, taller single sleepers, dorms |
| Full (double) | 54 × 75 | 137 × 191 | Single adults, guest rooms |
| Queen | 60 × 80 | 152 × 203 | Most couples; the most popular size |
| King | 76 × 80 | 193 × 203 | Couples who want more room, or with a child or pet |
| California king | 72 × 84 | 183 × 213 | Taller sleepers |
Sizes can vary by an inch or so between brands, and thick mattresses may need deep-pocket sheets. Check the label before you buy bedding.
King or California king?
A king is 4 inches wider; a California king is 4 inches longer. Their total areas are almost the same: 6,080 square inches for a king and 6,048 for a California king. Choose a California king if you’re over about 6 feet tall, and a king if you want more width. A split king is two twin XLs side by side, the same overall size as a king, popular with adjustable bases.
How much room do you need?
Plan for at least 24 inches, and ideally 30 to 36 inches, of walking space on each side and at the foot of the bed. For a queen, that means a room at least 9 by 8 feet 8 inches with the headboard against a wall, and more for nightstands and a dresser. The fit check uses 24 inches, which is tight but workable.
| Size | Smallest comfortable room (about) |
|---|---|
| Twin | 7 ft 2 in × 8 ft 3 in |
| Full | 8 ft 6 in × 8 ft 3 in |
| Queen | 9 ft × 8 ft 8 in |
| King | 10 ft 4 in × 8 ft 8 in |
| California king | 10 ft × 9 ft |
Space per sleeper
Each person gets about 30 inches on a queen and 38 inches on a king, the same width as a twin. A full gives two people only 27 inches each, which most couples find cramped.
To plan the rest of your room, try the square footage calculator.
How to use the mattress size reference
- Choose a mattress size. Pick twin, twin XL, full (double), queen, king or California king from the Mattress size list.
- Enter your room. Type the Room width and Room length in feet. Decimals are fine, so a room of 10 feet 6 inches goes in as 10.5.
- Pick the number of sleepers. Choose One or Two. This only changes the width-per-sleeper line.
- Press Show size. You see the size in inches and centimeters, a fit message for your room and a table of details, followed by a chart of all six sizes.
How the room fit check works
The check assumes the headboard sits against one wall. It then asks for walking space of 24 inches on each side of the bed and 24 inches at the foot. That matches the Sleep Foundation’s advice to leave about 24 inches of space around each side of your bed.[1] In numbers, the room must be at least the mattress width plus 48 inches one way, and the mattress length plus 24 inches the other way.
The tool tries your room both ways round, so a 10 by 12 room and a 12 by 10 room give the same answer. If the bed fits, you get a message that it fits your room. If not, the message says the room is tight and shows the size it would need.
Worked example: king or California king in a 10 by 10 room
Enter King with a room of 10 feet by 10 feet. A king is 76 inches wide, so it needs 124 inches across, which is 10 ft 4 in. The room is only 120 inches wide, so the tool says it’s tight and shows that the bed needs at least 10 ft 4 in × 8 ft 8 in.
Now switch to California king. It’s 72 inches wide, so it needs exactly 120 inches, or 10 ft, across, and 84 plus 24 inches, or 9 ft, along the room. Both fit, so the tool says it fits. In this room the longer, narrower bed works where the wider one doesn’t, even though their sleeping areas are almost the same.
Reading your result
- In feet gives the mattress size in feet and inches, such as 5 ft × 6 ft 8 in for a queen.
- Sleeping area is width times length in square inches, with square feet in brackets.
- Width per sleeper splits the width between one or two people.
- Smallest comfortable room is the mattress plus the walking space described above.
- Best for is a short note on who each size usually suits.
| Size | Sleeping area | Width each for two |
|---|---|---|
| Twin | 19.8 sq ft | 19 in |
| Twin XL | 21.1 sq ft | 19 in |
| Full | 28.1 sq ft | 27 in |
| Queen | 33.3 sq ft | 30 in |
| King | 42.2 sq ft | 38 in |
| California king | 42.0 sq ft | 36 in |
The table shows why going from a full to a queen feels roomy for a couple, while going from a king to a California king changes length more than space.
Mistakes to avoid when sizing a bed
- Using the whole room size. Measure the free floor where the bed will go. Take off space for a dresser, a radiator or a closet door that opens toward the bed.
- Forgetting the frame. The check uses the mattress only. A bed frame, footboard or thick headboard adds to the footprint, so measure it and add that to the walking space you need.
- Mixing up feet and inches. The room boxes take feet. A room of 10 feet 9 inches is 10.75, not 10.9.
- Buying bedding by name alone. Sheets list a size name, but mattress depth varies. Check the pocket depth against your mattress.
When to choose a bigger or smaller size
If the check says your room is tight, you have two easy options. Pick the next size down, or place the bed in a corner and give up walking space on one side. If the room has plenty of space, a larger size gives each sleeper more width, which often matters more than length unless someone is very tall. For laying out the rest of the room, the area and perimeter calculator can help.
What next
Use this often? Add Mattress Siz to your Home screen.
Frequently asked questions
What are queen bed dimensions?
A standard queen mattress is 60 inches wide and 80 inches long, about 152 × 203 cm.
How big is a king size bed?
A standard king is 76 × 80 inches. A California king is 72 × 84 inches, narrower but longer.
What is the difference between a full and a queen?
A queen is 6 inches wider and 5 inches longer than a full, which is 54 × 75 inches.
What size room do I need for a king bed?
At least about 10 ft 4 in × 8 ft 8 in for walking space around it, and more for nightstands and other furniture.
How does the mattress size reference check if a bed fits my room?
It adds 24 inches of walking space on each side and 24 inches at the foot, with the headboard against a wall. If your room is at least that big one way or the other, the bed fits.
Will a king bed fit in a 10 by 10 room?
Not with walking space on both sides. A king needs about 10 ft 4 in across. A California king, at 72 inches wide, fits a 10 by 10 room with 24 inches on each side.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.