Saved

Press the star next to a tool's name to save it.

All my tools

Concrete Calculator

Enter the size of your slab, footing or round column, and this concrete calculator works out the volume in cubic feet, cubic yards and cubic meters, plus how many 40, 50, 60 or 80 lb bags of premixed concrete to buy.

Restored your last values ·

ft
ft
in
in
ft
%

Bag yields don’t allow for spills, uneven ground or a thicker pour, so add a margin. The calculator starts at 10%.

For an L-shaped slab, split it into rectangles and work out each one. For several identical footings or posts, set How many.

Concrete needed

–

Enter the size to see how much concrete you need.

A concrete calculator works out how much concrete a job needs. Concrete is ordered by volume: multiply the length, width and thickness of a slab, or work out the volume of a round post hole, then convert to cubic yards or cubic meters for ready-mix, or to a number of bags for small jobs you mix yourself. This calculator does each step and adds an allowance for waste.

Concrete volume formulas

Slab: volume = length × width × thickness

Round column: volume = π × (diameter ÷ 2)² × height

Keep the units the same before multiplying: with feet and inches, divide the thickness in inches by 12 to get feet. A cubic yard is 27 cubic feet, and a cubic meter is about 35.31 cubic feet.

How to use the concrete calculator

  1. Choose the shape: a slab or footing, or a round column or post hole.
  2. Choose units and enter the size. For a slab, enter the thickness in inches or centimeters.
  3. Set how many identical pieces, and the extra for waste.
  4. Read the result in cubic yards or cubic meters, and the number of bags.

Worked example

A 10 × 10 ft patio 4 inches thick is 10 × 10 × 4/12 = 33.33 cubic feet, or 1.23 cubic yards. With 10% extra that is 36.67 cubic feet: 62 bags of 80 lb, or 82 bags of 60 lb.

How many bags of concrete?

Bag counts use the yields in Quikrete's own concrete calculator for its Concrete Mix:

Bag sizeApproximate yield
40 lb0.30 cu ft
50 lb0.375 cu ft
60 lb0.45 cu ft
80 lb0.60 cu ft

So it takes 45 bags of 80 lb to make one cubic yard. Quikrete notes that its yields are approximate and don't allow for uneven ground or waste, which is why the calculator adds extra. For large pours, ready-mixed concrete delivered by truck is usually easier than mixing many bags.

Tips for ordering concrete

  • Measure the thickness in a few places, since ground is rarely level; a slab that is half an inch thicker than planned uses noticeably more concrete.
  • Round up when ordering, never down, and have a few spare bags on hand. Running short partway through a pour leaves a weak joint.
  • For floor area in other units, use the area converter, or the square footage calculator to measure a room.

Worked example: fence post holes

Choose Round column or post hole for posts, piers and tube forms. QUIKRETE’s data sheet says to dig a post hole about 3 times the diameter of the post, with a depth of one third of the post’s overall height.[2] For eight 4 inch posts that stand 6 ft overall, that’s holes about 12 inches across and 2 ft deep.

  • One hole: π × (1 ÷ 2)² × 2 = 1.57 cu ft
  • Eight holes: 12.57 cu ft
  • With 10% extra: 13.82 cu ft, or 0.51 cu yd
  • Bags: 24 of 80 lb, 31 of 60 lb, 37 of 50 lb or 47 of 40 lb

The calculator counts the whole hole and doesn’t take off the space the post fills, so the figure leans a little high. That spare concrete is useful, because uneven hole walls often hold more than you measured.

Metric concrete calculator example

Choose Meters and cm, then enter the sides in meters and the thickness in centimeters. A slab 3 m by 3 m and 10 cm thick is 3 × 3 × 0.1 = 0.9 m³. With 10% extra, the calculator shows 0.99 m³ and 59 bags of 80 lb. The bag counts use QUIKRETE’s yields in cubic feet, so if your bags come in kilograms, check the yield printed on the bag.

How thickness changes the amount

Thickness has a big effect, because the volume rises in step with it. A 6 inch slab needs half as much again as a 4 inch slab. For a 10 × 10 ft slab with 10% extra:

ThicknessConcrete80 lb bags
3 in1.02 cu yd46
4 in1.36 cu yd62
5 in1.7 cu yd77
6 in2.04 cu yd92

QUIKRETE designs its Concrete Mix for pours 2 inches thick or more.[2] For load-bearing work, follow your local building code for the size of footings, as the data sheet also advises.[2]

How heavy is the concrete?

The data sheet gives a unit weight of about 140 lb per cubic foot.[2] So the 10 × 10 ft patio at 4 inches, with 36.67 cu ft including the extra, weighs roughly 5,100 lb once mixed. Keep that in mind if you plan to carry the bags in a car or trailer, or to fill a form that sits above the ground.

Mixing, joints and curing

  • Water. For each 80 lb bag, start with about 6 pints of water, and expect a final amount of about 6 to 9 pints.[2]
  • Control joints. QUIKRETE says to cut joints 1 inch deep every 6 to 8 ft across a slab.[2]
  • Curing. Start curing as soon as possible and keep it up for 5 days in weather at 70 °F or higher, or 7 days at 50 to 70 °F.[2]
  • Cold weather. Protect the concrete from freezing during the first 48 hours.[2]
  • Posts. Wait 24 hours before putting any strain on a post.[2]

Stay safe with wet concrete

QUIKRETE’s data sheet warns that the mix causes severe skin burns and serious eye damage.[2] It says to wear impervious gloves, such as nitrile, plus a mask and eye protection.[2] It also warns that breathing the dust for long periods may cause lung damage or cancer.[2] Read the safety data sheet before you start, and keep bags away from children.

Common mistakes

  • Entering the thickness in feet. With Feet and inches, the thickness goes in inches, so a 4 inch slab is 4, not 0.33.
  • Using the radius. For a round column, enter the full diameter across the hole or tube.
  • Setting the waste to zero. Bag yields are approximate, so keep a margin and round your order up.
  • Pouring in parts. The data sheet warns that partial depth fills could lead to cold joints, so have all the bags on site before you start.[2]

What next

Use this often? Add Concrete to your Home screen.

Frequently asked questions

How does the concrete calculator work out the volume?

For a slab it multiplies length × width × thickness; for a round column, π × radius² × height. It then adds your waste allowance and converts to cubic yards, cubic meters and bags.

How many 80 lb bags of concrete make a cubic yard?

An 80 lb bag of Quikrete Concrete Mix yields about 0.60 cubic feet, so a cubic yard (27 cubic feet) takes 45 bags.

How much concrete do I need for a 10x10 slab?

A 10 × 10 ft slab 4 inches thick needs 33.33 cubic feet, about 1.23 cubic yards, before any extra for waste.

Why add extra concrete?

Bag yields don’t allow for spills, uneven ground or a slightly thicker pour, so a margin avoids running short.

How much water goes in an 80 lb bag of concrete?

QUIKRETE says to start with about 6 pints of water for each 80 lb bag of its Concrete Mix, and the final amount should be about 6 to 9 pints.

How much concrete do I need for a fence post hole?

A hole 12 inches across and 2 ft deep holds about 1.57 cubic feet. With 10% extra, eight such holes need about 0.51 cubic yards, or 24 bags of 80 lb.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools