Square footage formula
For a rectangular space, multiply the length by the width. Measure both in feet, and turn any inches into a share of a foot by dividing them by 12.
Square feet = length in feet × width in feet
Feet = feet + (inches ÷ 12)
Worked example
A room is 12 feet long and 10 feet 6 inches wide. The width is 10 + (6 ÷ 12) = 10.5 feet, so the area is 12 × 10.5 = 126 square feet. At $4 per square foot, the material would cost about $504.
How to measure an L-shaped room
Split it into rectangles, and add each one as its own room. The calculator adds them together for you. Round figures up when you buy materials, and many installers suggest extra for cuts and waste, so check with yours.
Converting square feet
| Unit | Equals |
|---|---|
| 1 square yard | 9 square feet |
| 1 square meter | About 10.76 square feet |
| 1 acre | 43,560 square feet |
Common room sizes
| Room size | Square feet |
|---|---|
| 10 × 10 ft | 100 sq ft |
| 10 × 12 ft | 120 sq ft |
| 12 × 12 ft | 144 sq ft |
| 12 × 20 ft | 240 sq ft |
| 20 × 20 ft | 400 sq ft |
This calculator covers rectangles. For a real estate listing or an appraisal, the rules for what counts as living area vary, so go by the rules that apply to you.
How to use the square footage calculator
- Measure the first room. Run a tape along the floor from wall to wall for the length, then across for the width.
- Enter the length and width. Each has a box for feet and a box for inches. Leave the inches box empty if the measurement is a whole number of feet.
- Add more rooms. Press “Add a room” for each extra room or section, up to 20. Press “Remove room” to take one out.
- Add a price if you want a cost. Type the price per square foot of the flooring, carpet or other material. Leave it blank to skip the cost.
- Press Calculate. You see the total area in square feet, the area of each room, the same total in square yards, square meters and acres, and the estimated cost.
Worked example: three rooms with feet and inches
Say you want new flooring in a living room, a kitchen and a hallway, at $3.25 per square foot.
| Room | Length | Width | Area |
|---|---|---|---|
| Living room | 15 ft 6 in | 12 ft | 15.5 × 12 = 186 sq ft |
| Kitchen | 11 ft | 10 ft 9 in | 11 × 10.75 = 118.25 sq ft |
| Hallway | 3 ft 6 in | 12 ft | 3.5 × 12 = 42 sq ft |
The calculator adds the rooms to get 346.25 sq ft. It also shows 38.47 square yards, 32.17 square meters and 0.0079 acres. At $3.25 a square foot, the estimated cost is $1,125.31. These are the figures the calculator gives when you enter the three rooms and the price.
Notice how the inches were handled. Six inches is half a foot, so 15 ft 6 in becomes 15.5 feet, and 9 inches is three quarters of a foot, so 10 ft 9 in becomes 10.75 feet.
Inches as part of a foot
This table saves you the division when you work by hand. The calculator does the same sum for you, without rounding.
| Inches | Feet | Inches | Feet |
|---|---|---|---|
| 1 | 0.083 | 7 | 0.583 |
| 2 | 0.167 | 8 | 0.667 |
| 3 | 0.25 | 9 | 0.75 |
| 4 | 0.333 | 10 | 0.833 |
| 5 | 0.417 | 11 | 0.917 |
| 6 | 0.5 | 12 | 1 |
Worked example: an L-shaped room
An L-shaped family room is easiest to measure as two rectangles. Draw a line across the room where the L turns. Here the main part is 20 ft by 12 ft and the smaller part is 8 ft by 10 ft. Enter them as Room 1 and Room 2:
- Room 1: 20 × 12 = 240 sq ft
- Room 2: 8 × 10 = 80 sq ft
- Total: 320 sq ft, or 35.56 square yards and 29.73 square meters
Make sure the two rectangles don’t overlap. Measure the second one only from the dividing line, or the corner gets counted twice. The same method works for a T-shaped room or an open plan area: split it into rectangles that touch but don’t overlap.
How to read the result
- Total area is the sum of all the rooms, shown to two decimal places.
- Room rows appear when you enter more than one room, so you can check each one.
- Square yards are the total divided by 9. Carpet is sometimes priced this way.
- Square meters use 1 square foot = 0.09290304 square meters.
- Acres are the total divided by 43,560. For a room the figure is tiny, but it helps for a large barn or shop floor.
- Estimated cost is the total area times your price per square foot, rounded to the cent.
Spaces that aren’t rectangles
This calculator multiplies length by width, so it suits rectangles and squares. For a bay window, a curved wall or a corner cut at an angle, split off the odd part and work it out on its own. A triangle is half of base times height, and a half circle is half of π times the radius squared. The area and perimeter calculator handles those shapes. Then add the odd part to the rectangles you entered here. For a quick estimate, you can also measure the odd part as the smallest rectangle that covers it, which gives a little more than you need rather than less.
Common measuring mistakes
- Typing inches in the feet box. 10 ft 6 in is 10 in the feet box and 6 in the inches box, not 10.6 in the feet box. 10.6 feet is about 10 ft 7 in.
- Measuring along baseboards or furniture. Measure the open floor from wall to wall, and move furniture out of the way of the tape if you can.
- Forgetting closets and alcoves. If they get the same flooring, add each as its own small room.
- Buying the exact area. Cuts, pattern matching and damaged pieces use extra material. Ask your supplier or installer how much to add for your material.
For a quote on a specific material, the flooring calculator, tile calculator and paint calculator work out boxes, tiles and gallons. For land rather than rooms, use the plot area calculator.
What next
Use this often? Add Square Foota to your Home screen.
Frequently asked questions
How do I calculate square footage with feet and inches?
Divide the inches by 12 and add them to the feet, then multiply length by width. For example, 12 ft × 10 ft 6 in is 12 × 10.5 = 126 square feet.
How do I find the square footage of a whole house?
Measure each room or section as a rectangle, add each one here, and the calculator gives you the total.
How do I convert square feet to square yards?
Divide by 9. For example, 126 square feet is 14 square yards.
How many rooms can the square footage calculator add?
Up to 20. Press Add a room for each one, and the result lists every room’s area along with the total.
Is 10.6 feet the same as 10 feet 6 inches?
No. 10 feet 6 inches is 10.5 feet. 10.6 feet is about 10 feet 7 inches. Enter feet and inches in their own boxes to avoid the mix-up.
How do I estimate the cost of flooring by square foot?
Enter the price per square foot in the optional price box. The calculator multiplies it by the total area. For 346.25 square feet at $3.25, the estimate is $1,125.31.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.