How to measure your plot
Measure each side along the ground, from corner to corner. For a lot with four unequal sides, also measure one diagonal, from one corner to the opposite corner. The diagonal splits the lot into two triangles, which lets the calculator find the exact area.
Formulas used
| Shape | Area |
|---|---|
| Rectangle or square | length × width |
| Triangle, from three sides | √(s(s−a)(s−b)(s−c)), where s is half the perimeter (Heron’s formula) |
| Trapezoid | (side 1 + side 2) ÷ 2 × height, where the two sides are parallel |
| Irregular four-sided lot | Two triangles split by the diagonal, each found with Heron’s formula |
| Circle | π × radius² |
Worked example
A rectangular lot 100 feet by 50 feet is 5,000 square feet. One acre is 43,560 square feet, so that’s 5,000 ÷ 43,560 ≈ 0.115 acres, or about 464.5 square meters.
An irregular lot has sides of 120, 80, 110 and 90 feet, with a 140-foot diagonal from the first corner to the third. The calculator finds the two triangles, about 4,791 and 4,948 square feet, for a total of about 9,738 square feet, or 0.22 acres.
Common land area units
| Unit | Square feet |
|---|---|
| 1 square yard | 9 |
| 1 square meter | 10.764 |
| 1 acre | 43,560 |
| 1 hectare | 107,639 |
When to use a survey
This calculator gives an estimate from your own measurements. Lot lines on the ground may not match a fence or hedge. For buying, selling, building or settling a boundary, rely on a licensed land surveyor and your recorded plat or deed. Many counties also show lot sizes on their online property or GIS maps.
To convert between area units, try the area converter or the acres to hectares converter.
How to use the plot area calculator
- Choose the lot shape. Pick Rectangle or square, Triangle, Trapezoid (two parallel sides), Irregular, four sides, or Circle.
- Choose the unit. Under “Measured in”, pick Feet, Yards or Meters. Use the unit your tape, wheel or plat drawing uses.
- Enter the measurements. The boxes change with the shape: length and width for a rectangle, three sides for a triangle, the two parallel sides and the height between them for a trapezoid, four sides and a diagonal for an irregular lot, and the radius for a circle.
- Add a price if you like. Type a price per square foot to get an estimated value. Leave it blank to skip.
- Press Calculate. The result gives the area in square feet, square yards, acres, square meters and hectares.
More worked examples
A triangular corner lot. The sides are 150, 120 and 90 feet. Half the perimeter is 180, so Heron’s formula gives √(180 × 30 × 60 × 90) = 5,400 sq ft, which is 600 square yards, 0.124 acres and 501.68 square meters.
A trapezoid lot with a price. The front is 80 feet, the back is 120 feet, and the two are parallel, 150 feet apart. The area is (80 + 120) ÷ 2 × 150 = 15,000 sq ft, or 0.3444 acres and 1,393.55 square meters. At $12 per square foot, the estimated value is $180,000.00.
A lot measured in meters. Choose Meters, then enter a rectangle 30 m by 20 m. That’s 600 square meters, which the calculator shows as 6,458.35 sq ft, 0.1483 acres and 0.06 hectares.
A circular plot. A round garden bed or pond area with a 50-foot radius is π × 50² = 7,853.98 sq ft, or about 0.1803 acres.
Each figure above is what the calculator shows for those inputs.
Which shape fits your lot?
| If your lot… | Choose | What to measure |
|---|---|---|
| Has four square corners | Rectangle or square | Length and width |
| Has three sides | Triangle | All three sides |
| Has a front and back that run parallel but differ in length | Trapezoid | Both parallel sides and the straight distance between them |
| Has four sides with no right angles or parallel pairs | Irregular, four sides | All four sides and the diagonal from corner A to corner C |
| Is round | Circle | The radius, from the center to the edge |
For a lot with five or more sides, split it into triangles and four-sided pieces, work out each one, and add the square feet together.
When the calculator says the sides don’t fit
Three lengths make a triangle only when each one is shorter than the other two added together. Sides of 100, 40 and 50 feet can’t meet, because 40 + 50 is less than 100, so the calculator asks you to check them. For an irregular four-sided lot, the same test applies to both triangles: sides 1 and 2 with the diagonal, and sides 3 and 4 with the diagonal.
If you see this message, check that you went around the lot in order, corner A, B, C, D, and that the diagonal runs from A to C, not from B to D. A wrong diagonal is the most common cause. Also check every number uses the unit you picked.
Tips for accurate plot measurements
- Measure on the level. The formulas work on a flat plane, like a map. A tape laid along a slope reads longer than the flat distance between the same two points, so on hilly ground the area can come out bigger than the map shows.
- Use the trapezoid height, not a side. The height is the straight distance between the parallel sides, at a right angle to them. A slanted side is longer.
- Measure the circle’s radius, not its diameter. If you measured straight across, halve it first.
- Measure twice. Take each side two times and use the average if the readings differ a little.
- Keep one unit. Don’t mix feet and meters in one calculation. Pick the unit first, then enter every side in it.
Using the plot area calculator to compare lots
When you weigh up two lots, enter the same price per square foot for two lots to compare their estimated values side by side, or divide the asking price by the square feet the calculator shows to find the price per square foot of each listing. A larger lot on paper may hold less usable ground if part of it is a steep bank, a stream or an easement, so walk the land as well as working out its area.
What next
Use this often? Add Plot Area to your Home screen.
Frequently asked questions
How do I calculate the area of an irregular lot?
Measure all four sides and one diagonal. The diagonal splits the lot into two triangles; the calculator finds each with Heron’s formula and adds them.
How many square feet are in an acre?
One acre is 43,560 square feet, or about 4,047 square meters.
What size is a typical lot?
It varies widely by area. Many suburban lots are between about 5,000 and 10,000 square feet, or roughly an eighth to a quarter of an acre.
Can I enter meters?
Yes. Choose meters or yards, and the results still show square feet, acres, square meters and hectares.
What does the plot area calculator need for a trapezoid lot?
The two parallel sides and the height between them, measured at a right angle to those sides. For an 80-foot front and 120-foot back that are 150 feet apart, the area is 15,000 square feet.
Why does the calculator say my sides can’t form the lot?
Each side of a triangle must be shorter than the other two added together. For a four-sided lot, check that you went around the corners in order and that the diagonal runs from corner A to corner C.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.