Saved

Press the star next to a tool's name to save it.

All my tools

Ring Size Converter

Choose the ring size system you know, enter your size, and this ring size converter shows the matching US, UK, India, Japan and European sizes, with the inside diameter and circumference.

Restored your last values ·

Pick a size from the suggestions. For diameter or circumference, the nearest size is shown. Measure a ring that fits across the inside, edge to edge.

Your ring size

–

Choose a system and enter a size to convert it.

A ring size converter matches your ring size across the systems used in different countries. The US uses numbers with quarter sizes, the UK uses letters, India and Japan use their own number scales, and much of Europe uses the inside circumference in millimeters. Choose the system you know, enter your size, and this converter shows the rest, along with the ring's inside diameter and circumference.

How to use the ring size converter

  1. Choose what you know. A size in one system, or the inside diameter of a ring that fits.
  2. Enter the size. Pick it from the suggestions as you type.
  3. Read the table. It shows the same size in every system. A dash means a system has no size at that exact step.

How ring sizes are defined

  • ISO and much of Europe: ISO 8653 gives the size as the inside circumference in millimeters, so size 54 is a ring 54 mm around the inside.
  • US, Canada and Mexico: numbers in quarter sizes; each whole size adds 0.032 inches (0.81 mm) to the inside diameter.
  • UK, Ireland and Australia: letters with half sizes; since 1987 each letter step adds 1.25 mm of circumference.
  • India, Japan and China: whole-number scales that don't follow the diameter in a straight line, so they are read from a table.
  • Italy, Spain and Switzerland: the circumference minus 40 mm, so size 10 is ISO 50.

The sizes here come from the equivalency table in Wikipedia's ring size article.

How to measure your ring size

  1. From a ring that fits: measure across the inside, edge to edge, in millimeters, and choose Inside diameter.
  2. From your finger: wrap a thin strip of paper around the base of the finger, mark where it overlaps, and measure the length in millimeters. That is the circumference, so choose ISO / EU size.
  3. Measure at the end of the day, when fingers are largest, and make sure the ring will pass over the knuckle.

Example

A US size 7 ring has an inside diameter of 17.32 mm and a circumference of 54.4 mm. That is N½ in the UK, 14 in India and Japan, and 14.4 in Italy.

Tips before you buy

  • Wide bands fit more snugly than thin ones, so many people choose a slightly larger size for a wide band.
  • Sizes between systems don't line up exactly, so if you are between two sizes, ask the jeweler.
  • Check the retailer's own chart, as some brands size a little differently.

To convert shoe sizes too, try the shoe size converter.

Converting a measurement you took yourself

You don’t need a known size to use the ring size converter. A paper strip or a ring you already own is enough, as long as you pick the right option in the “I know my” list.

Example 1: a paper strip. You wrap a strip around your finger and it measures 52 mm. That length is the circumference, so choose ISO / EU size and type 52. There is no row at exactly 52 mm, so the converter picks the nearest one, 51.9 mm. It shows US 6, UK L½, India 12, Japan 11 and Italy 11.9, with an inside diameter of 16.51 mm.

Example 2: a ring that fits. You measure across the inside of a ring and get 18 mm. Choose Inside diameter (mm) and type 18. The nearest row is 17.93 mm, which is US 7¾, UK P, India 16 and ISO 56.3. Japan shows a dash, because the Japanese scale has no size at that step. The large result reads “US 7¾ · 17.9 mm”.

Because the converter rounds to the nearest row in its chart, a measurement that falls halfway between two rows is worth checking on the next row up as well, especially for a wide band.

How to read the ring size converter’s table

  • US and Canada: numbers in quarter steps, shown with fractions such as 7¾.
  • UK, Ireland and Australia: letters with half sizes. A few large sizes use Z1 to Z3.
  • India and Japan, China and Korea: whole numbers that skip some steps, which is why a dash can appear.
  • ISO / EU: the inside circumference in millimeters, to one decimal place.
  • Italy, Spain and Switzerland: the circumference minus 40.
  • Inside diameter and inside circumference: the ring’s own measurements in millimeters.

Letters and whole-number sizes must match a size in the chart exactly. If you type a size that isn’t listed, such as an India size the scale skips, you see a message asking you to pick one from the suggestions. US sizes, diameters and circumferences instead find the nearest row.

How jewelers measure ring size

The international standard for ring sizes is ISO 8653. It sets out a method to measure the ring size with a ring stick of defined dimensions, used mainly while rings are being made, and it sets how the size is written.[2] For sizing a customer’s finger, the standard notes that jewelers use a finger gauge set: one ring for each size, with the same diameter and tolerance as the ring stick.[2]

This is why a jeweler’s reading is more reliable than a paper strip. Paper can stretch, slip or be pulled too tight, and it doesn’t show how a ring will pass over the knuckle. If you are buying an expensive ring, use the converter to get close, then have your finger checked with a gauge set.

Common ring sizing mistakes

  • Mixing up diameter and circumference. A 17 mm diameter and a 17 mm circumference are very different rings. Choose the option that matches what you measured.
  • Measuring cold fingers. Fingers are smaller in the morning and in cold weather, so a ring sized then can feel tight later.
  • Measuring the wrong hand. Many people’s dominant hand has slightly larger fingers.
  • Ignoring band width. A wide band covers more of the finger and fits more snugly than a thin one of the same size.

What next

Use this often? Add Ring Size to your Home screen.

Frequently asked questions

How does the ring size converter work?

It finds your size in a table of ring sizes and shows the same ring in the other systems, with its inside diameter and circumference in millimeters.

What is a US size 7 in India?

A US size 7 ring is size 14 in India, with an inside diameter of 17.32 mm.

How do I find my ring size at home?

Measure the inside diameter of a ring that fits in millimeters, or wrap a paper strip around your finger and measure its length for the circumference.

What is the EU ring size?

European (ISO) ring sizes are the inside circumference in millimeters, so size 54 is 54 mm around the inside.

What is a UK L ring in US sizes?

A UK L is a US 5¾, with an inside diameter of 16.31 mm and a circumference of 51.2 mm. It is size 11 in India.

What if my measurement falls between two ring sizes?

The converter shows the nearest size in its chart. If you are close to halfway between two sizes, or the band is wide, check the larger size with the jeweler before you buy.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools