A flooring calculator works out how much flooring to buy for a room. Measure the floor area, add extra for cuts and offcuts, and round up to whole boxes. The right amount of extra depends on the material, so this calculator sets it for you when you pick the floor type, and you can change it.
Flooring formula
Flooring to buy = length × width × (1 + waste %), rounded up to whole boxes
How to use the flooring calculator
- Choose feet or meters and enter the room's length and width.
- Add any extra area, such as a closet or bay window.
- Pick the floor type. The waste allowance changes to suit it.
- Enter the coverage per box from the packaging, and the price if you want the cost.
How much extra flooring to buy
Some flooring is always lost to cuts along walls and around doors, and some boards or tiles may be damaged. Factory Flooring Liquidators' guide gives these allowances by material:
| Floor type | Extra to buy |
|---|---|
| Solid hardwood | 20% |
| Wall-to-wall carpet | 10% |
| Ceramic tile | 5–15%, depending on size |
| Vinyl and laminate | 5–10% |
The calculator uses the top of each range. Rooms with many corners, angled walls or a diagonal layout need more cuts, so lean toward more.
Worked example
A 12 × 15 ft room is 180 sq ft. With 10% extra for laminate you need 198 sq ft. If each box covers 20 sq ft, buy 10 boxes, which is 200 sq ft.
Measuring the room
Measure each wall at floor level, at the widest points, and include any area that will be covered, such as under a sofa. Doorways that the flooring runs into count too. For a room with several alcoves, split the floor into rectangles, enter the largest as the room and add the rest as extra area.
Tips before you buy
- Buy all the flooring from the same batch, as color can vary between batches.
- Keep a spare box after the job for future repairs.
- Let laminate and wood flooring settle in the room before laying it, as the manufacturer's instructions describe.
For tiles counted one by one, use the tile calculator, and to convert between square feet and square meters, the area converter.
Worked example: hardwood with a closet
A bedroom is 14 × 16 ft, and the hardwood will also run into a closet of 12 sq ft. Enter 14 and 16 as the room length and width, 12 as the extra area, and choose Solid hardwood as the floor type. The extra for waste changes to 20%.
- Floor area: 14 × 16 + 12 = 236 sq ft
- Area to buy: 236 × 1.2 = 283.2 sq ft
- With 22 sq ft in each box: 283.2 ÷ 22 = 12.87, rounded up to 13 boxes, which is 286 sq ft
- At $89.99 a box: $1,169.87
If you chose Laminate for the same room, the waste would be 10% and you’d need 259.6 sq ft, or 12 boxes. The floor type alone changes the order by a box.
Metric example
Choose Meters to enter the room in meters and the box coverage in square meters. A living room of 4 × 5 m is 20 m². With laminate and its 10% allowance, you need 22 m². If each box covers 2.22 m², 22 ÷ 2.22 = 9.91, so you buy 10 boxes, or 22.2 m².
Waste allowance by floor type
When you change the floor type, the calculator fills in the extra for waste for you. These are the values it uses:
| Floor type | Extra for waste |
|---|---|
| Laminate | 10% |
| Vinyl | 10% |
| Solid hardwood | 20% |
| Carpet | 10% |
| Ceramic tile | 15% |
| Other | keeps the value you had |
You can type any value from 0 to 50% in the box. Choose a higher figure for a diagonal layout or a room with many corners, and a lower one for a plain square room with few cuts. Choosing Other leaves the box as it is, so you can enter the allowance your installer or the product’s instructions suggest.
How to read the flooring calculator result
The headline shows what to buy. With a coverage per box, it’s a number of boxes. Without one, it’s the area to buy, rounded up to the next whole square foot or square meter. Below it you see the floor area, the area to buy with the waste added, the boxes and the area they cover, and the cost if you entered a price.
The price box works two ways. With a coverage per box, enter the price of one box, and the cost is the boxes times that price. Without a box size, enter the price per square foot or square meter, and the cost is that price times the area to buy. The calculator doesn’t round that area up for the cost, so a store that sells by the whole unit may charge a little more.
Carpet and other roll flooring
The calculator works with area, which suits boxed flooring such as laminate, vinyl plank, tile and hardwood. Carpet and sheet vinyl are often cut from a roll of a fixed width. Seams, the direction of the pile and the roll width can mean you need more than the area alone suggests. Use the result as a first estimate, and ask your store to measure for the cut. For carpet, the carpet calculator is another way to check.
Common mistakes
- Counting planks instead of area. The box label may list both. Enter the area the box covers, not the number of pieces.
- Mixing units. With Feet, the box coverage is in square feet. With Meters, it’s in square meters.
- Adding waste twice. The calculator already adds the allowance, so don’t add extra to the room size as well.
- Forgetting small spaces. Closets, hallways and the floor under built-in furniture that will be covered all belong in the extra area.
What next
Use this often? Add Flooring to your Home screen.
Frequently asked questions
How does the flooring calculator work?
It multiplies the room’s length by its width, adds the waste allowance for your floor type, and rounds up to whole boxes using the coverage per box.
How much extra flooring should I buy?
About 20% for solid hardwood, 10% for carpet, 5–15% for ceramic tile and 5–10% for vinyl and laminate.
How many boxes of flooring do I need for a 12x15 room?
A 12 × 15 ft room is 180 sq ft, or 198 sq ft with 10% extra. With boxes of 20 sq ft, you need 10 boxes.
Can I use meters?
Yes. Choose Meters to enter the room in meters and the box coverage in square meters.
What waste allowance does the flooring calculator use for hardwood?
It fills in 20% for solid hardwood, 15% for ceramic tile and 10% for laminate, vinyl and carpet. You can change the value to anything from 0 to 50%.
How many boxes of hardwood do I need for a 14x16 room?
A 14 x 16 ft room is 224 sq ft, or 268.8 sq ft with 20% extra. With boxes of 22 sq ft, you need 13 boxes.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.