Saved

Press the star next to a tool's name to save it.

All my tools

Carpet Calculator

Enter the room’s length and width. The carpet calculator works out the square feet and square yards of carpet with waste, how to cut it from a 12 ft roll, how many seams you’ll have, and the cost of carpet and pad.

Restored your last values ·

Most carpet for homes comes in 12 ft rolls.

Blank boxes use a 12 ft (3.66 m) roll and 10% waste.

Carpet to buy

–

Enter the room’s length and width.

See full result

The carpet calculator works out how much carpet to buy for a room. Enter the length and width, and it gives the area in square feet and square yards with a waste allowance, shows how the carpet would be cut from a roll, how many seams there will be, and what the carpet and padding cost at the prices you enter. For example, a 12 × 15 ft bedroom is 180 sq ft; with 10% extra for waste you need 198 sq ft, or 22 square yards.

How to calculate carpet

  1. Area = length × width. A 12 × 15 ft room is 180 sq ft.
  2. Add waste: multiply by 1 plus the waste percentage. With 10%, 180 × 1.1 = 198 sq ft.
  3. Square yards = square feet ÷ 9, because a square yard is 3 ft × 3 ft. 198 ÷ 9 = 22 square yards.

Most stores now price carpet by the square foot, but many installers and older price lists still use square yards, so the calculator shows both.

How to use the carpet calculator

  1. Choose US or metric units.
  2. Enter the room’s length and width. Measure at the widest points, into doorways and closets you want carpeted.
  3. Check the roll width. It starts at 12 ft, the most common width for homes; change it to 15 ft or another width if your carpet comes that way.
  4. Set the waste allowance. It starts at 10%.
  5. Enter prices per square foot for carpet and pad to see the cost.

Carpet roll widths and seams

Carpet is made in long rolls of a fixed width. According to Flooring Clarity’s guide to standard widths, 12-foot rolls are the most common for US homes, 15-foot rolls are used for large rooms, halls and commercial spaces, and narrower widths are used for runners and stairs. When a room is wider than the roll, two or more pieces have to be joined with a seam.

The calculator tries laying the carpet both ways and picks the layout that cuts the least carpet from the roll. A 12 × 15 ft room fits a 12 ft roll exactly: one piece 15 ft long, no seams. A 14 × 20 ft room needs two strips of a 12 ft roll, each 14 ft long, which cuts 336 sq ft from the roll for a 280 sq ft room and leaves one seam. The offcut can sometimes cover a closet or landing.

Worked example

For a 14 × 20 ft family room with 10% waste, a 12 ft roll, carpet at $3 per sq ft and pad at $0.60 per sq ft:

  • Area: 280 sq ft; with waste: 308 sq ft, or 34.22 square yards
  • Roll layout: 2 pieces 14 ft long, 336 sq ft cut from the roll, 1 seam
  • Carpet: 308 × $3 = $924
  • Pad: 280 × $0.60 = $168
  • Total: $1,092 before installation

The prices here are only for the example; enter the prices from your store or installer.

How much waste to allow

Simple rectangular rooms need little extra, while rooms with closets, bay windows, angles or a patterned carpet need more. Flooring Clarity suggests adding 3 to 10% for cutting, and 8 to 15% for patterned or complex spaces, because patterns must line up at seams. If your installer works out the cut from the roll, the roll layout line is a good check on their figure.

Carpet padding

Pad (or underlay) goes under the carpet to make it softer and help it last. It’s usually laid to cover the floor area without the extra needed for carpet seams and pattern matching, so the calculator prices it on the room area. Ask your retailer which pad thickness and density the carpet’s warranty requires.

Measuring tips

  • Measure each room separately and add them up, rather than measuring the whole floor at once.
  • Round up to the next half foot or foot.
  • Include doorways: carpet usually runs to the middle of the door threshold.
  • Stairs are measured differently, by the tread and riser of each step, so allow for them separately.

Square feet, square yards and square meters

One square yard equals 9 square feet, and one square meter equals about 10.76 square feet. If one store quotes $27 per square yard and another $3.25 per square foot, divide the square-yard price by 9 to compare: $27 ÷ 9 = $3 per square foot, so the first store is cheaper. In metric mode the calculator works in square meters throughout, and you can enter the roll width in meters.

Pile direction and pattern matching

Carpet has a pile direction, and pieces must be laid with the pile running the same way, or the seam shows as a change in color. That’s why installers can’t always turn an offcut sideways to fill a gap. Patterned carpet also has a pattern repeat: every piece must be shifted so the pattern lines up across the seam, which uses extra length. If you’ve chosen a patterned carpet, raise the waste allowance and ask the store for the repeat length.

When to call a professional

Most carpet is installed by professionals with a power stretcher, which pulls the carpet tight so it doesn’t ripple later. Many stores measure the rooms for free before you order. Use the calculator to check their figure and budget before the visit.

For hard floors, use the flooring calculator or the tile calculator. For the area of an odd-shaped room, start with the square footage calculator.

What next

Use this often? Add Carpet to your Home screen.

Frequently asked questions

How does the carpet calculator work out square yards?

It multiplies length by width, adds your waste percentage and divides the square feet by 9. A 12 × 15 ft room with 10% waste needs 22 square yards.

What width does carpet come in?

12 ft is the most common width for homes in the US, with 15 ft rolls for large rooms and narrower widths for runners and stairs.

How much extra carpet should I buy?

Around 10% is a common starting point for a simple room. Rooms with angles, closets or patterned carpet need more.

Why does the roll cut more than my room’s area?

When a room is wider than the roll, the extra strip is cut at full roll width, so some carpet is left over. The calculator picks the direction that wastes least.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools