Saved

Press the star next to a tool's name to save it.

All my tools

BTU Calculator

Enter your room's length and width, and this BTU calculator shows the cooling capacity you need, adjusted for sunlight, the number of people and kitchen use.

Restored your last values ·

Based on the ENERGY STAR sizing chart for rooms with 8-foot ceilings.

Cooling capacity needed

–

Enter your room size to see the capacity you need.

See full result

A BTU calculator tells you how much cooling power a room needs, so that you can choose an air conditioner of the right size. Enter the length and width of the room, say how many people use it and how sunny it is, and this BTU calculator gives you the capacity in BTUs per hour, along with the equivalent in tons and kilowatts. It uses the sizing chart published by ENERGY STAR, the US government's efficiency program, together with its recommended adjustments.

What does BTU mean?

BTU stands for British thermal unit, a measure of heat energy. When an air conditioner is described as 12,000 BTU, it really means 12,000 BTUs per hour, the rate at which it can remove heat from a room. In many countries, including India, air conditioners are sold by the ton instead. One ton of cooling is 12,000 BTUs per hour, or about 3.52 kilowatts. So a 1.5-ton air conditioner provides 18,000 BTUs per hour.

How to use the BTU calculator

  1. Choose feet or meters.
  2. Enter the room's length and width. For an L-shaped room, split it into rectangles and add up the areas.
  3. Enter the number of people who regularly use the room.
  4. Choose the sunlight level, and tick the box if the room is a kitchen.
  5. Press Calculate to see the capacity you need.

BTU sizing chart

These figures come from ENERGY STAR and assume a ceiling height of 8 feet.

  • 100 up to 150 sq ft: 5,000 BTU/hr
  • 150 up to 250 sq ft: 6,000 BTU/hr
  • 250 up to 300 sq ft: 7,000 BTU/hr
  • 300 up to 350 sq ft: 8,000 BTU/hr
  • 350 up to 400 sq ft: 9,000 BTU/hr
  • 400 up to 450 sq ft: 10,000 BTU/hr
  • 450 up to 550 sq ft: 12,000 BTU/hr
  • 550 up to 700 sq ft: 14,000 BTU/hr
  • 700 up to 1,000 sq ft: 18,000 BTU/hr

How the adjustments work

  • Heavily shaded room: reduce the capacity by 10 percent.
  • Very sunny room: increase the capacity by 10 percent.
  • More than two people: add 600 BTUs for each additional person who regularly occupies the room.
  • Kitchen: add 4,000 BTUs for the heat from cooking.

BTU calculator example

Take a bedroom that is 20 feet long and 12 feet wide, an area of 240 square feet. The chart gives 6,000 BTUs per hour. If the room is very sunny, add 10 percent to reach 6,600. If three people regularly use it, add 600 for the extra person, giving a total of 7,200 BTUs per hour. That is 0.6 tons of cooling, so a unit somewhat above that figure would be a sensible choice.

Why the right size matters

Bigger isn't better when it comes to air conditioners. An oversized unit cools a room quickly and then shuts off before it has removed enough moisture, which can leave the air feeling cold and clammy. It also wastes energy by starting and stopping often. An undersized unit, on the other hand, runs continuously without ever reaching a comfortable temperature, and that uses more electricity and wears the machine out faster. Matching the capacity to the room gives you the best comfort for the money you spend.

Other things that affect cooling

The chart assumes an ordinary 8-foot ceiling. With higher ceilings, ENERGY STAR suggests considering a unit with a higher capacity. Poor insulation, large windows, a top-floor position under a hot roof and heat-producing equipment can all increase the load as well. If you live somewhere very hot, or if your room has several of these features, it is worth asking a qualified installer to assess it. Also think about where the unit will be mounted, because a position close to a corner may call for a model that can direct the airflow suitably.

Choosing between tons and BTUs in India

Shops in India usually label room air conditioners as 0.75, 1, 1.5 or 2 tons, while the star rating describes how efficient the model is. Use the ton figure shown here as your starting point, and choose the nearest size available, going up a little rather than down if your room is hot or has a lot of glass. For a split system with several indoor units, add up what each room needs and then ask the installer to confirm the total.

How to measure an unusual room

Always measure in feet, and convert any inches into fractions of a foot, so that 12 feet 6 inches becomes 12.5 feet. For a square or rectangular room, multiply the length by the width. For a triangular space, multiply the length by the width and then divide by two. If the room has a more complicated shape, divide it into squares, rectangles and triangles, work out each area, and add them together before you enter the total.

Common mistakes

  • Buying the largest unit you can afford. Oversizing reduces comfort.
  • Forgetting extra occupants. Each extra person adds heat.
  • Ignoring the kitchen. Cooking adds a great deal of heat.
  • Confusing BTU with BTU per hour. Labels on air conditioners mean BTU per hour.

Measure your floor with the square footage calculator, convert units with the power converter, and see how solar might help with the solar panel calculator.

What next

Use this often? Add BTU to your Home screen.

Frequently asked questions

How does the BTU calculator work?

It finds your room's area on the ENERGY STAR chart, then adjusts for sunlight, the number of people and kitchen use.

How many BTU do I need for a 12 by 20 foot room?

A 240 sq ft room needs about 6,000 BTU per hour before any adjustments for sun, occupants or cooking.

How many BTU is one ton of AC?

One ton of cooling is 12,000 BTU per hour, or about 3.52 kilowatts.

Is a bigger air conditioner better?

No. An oversized unit can leave the room damp and uses energy less efficiently.

Does ceiling height matter?

Yes. The chart assumes 8-foot ceilings, so higher ceilings may need more capacity.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools