How the brick calculator works
- Find the wall area. Multiply the length by the height. A wall 20 feet long and 8 feet high is 160 square feet.
- Take off openings. Subtract the area of doors and windows. A 3 × 7 foot door is 21 square feet.
- Multiply by bricks per square foot. This depends on the brick size and the mortar joint.
- Add waste. Extra bricks cover cuts, breakage and color matching later. 5% is a common allowance; use 10% for walls with many corners or cuts.
Bricks per square foot by size
The count uses each brick’s nominal size, which is its actual size plus one mortar joint, usually 3/8 inch. One square foot is 144 square inches, so the number of bricks is 144 divided by the face area of one nominal brick.
| Brick | Nominal face (inches) | Bricks per sq ft |
|---|---|---|
| Modular | 8 × 2⅔ | 6.75 |
| Standard | 8⅜ × 2⅝ | 6.55 |
| Queen | 8 × 3⅕ | 5.63 |
| King | 10 × 3 | 4.80 |
| Norman | 12 × 2⅔ | 4.50 |
| Utility | 12 × 4 | 3.00 |
Modular brick is the most common size in the US. Its actual size is 7⅝ × 2¼ × 3⅝ inches, so three courses with mortar rise 8 inches.
Worked example
A garden wall is 20 feet long and 8 feet high, with no openings, in modular brick. That’s 160 square feet × 6.75 = 1,080 bricks. Adding 5% for waste gives 1,134 bricks to order. At $0.75 a brick, that’s about $850.50.
Single and double walls
A single layer of brick, one wythe, is typical for brick veneer over a frame house. Freestanding garden walls and structural walls often use two layers, which doubles the bricks. Taller freestanding walls also need proper footings and sometimes steel reinforcement, so check your local building code.
What else you’ll need
- Mortar. Your supplier can work out the bags from the brick count and joint size.
- Wall ties for brick veneer, which fix the brick to the wall behind it.
- Lintels over doors and windows to carry the brick above the opening.
For the footing, use the concrete calculator. To measure an odd-shaped area, try the square footage calculator.
How to use the brick calculator
- Choose your units. Pick Feet or Meters. In meters, the lengths are in meters and the openings box takes square meters.
- Enter the wall length and wall height. Measure the face you will cover with brick, not the footing or the roof line above it.
- Enter the doors and windows to take off. Add up the area of every opening and type the total. Leave it at 0 for a plain wall.
- Pick a brick size. The list shows each brick’s actual size. The count is worked out from its nominal size, which adds one mortar joint.
- Choose the wall thickness. Single layer is one wythe of brick. Double layer doubles the count for a two-wythe wall.
- Set the extra for waste. The box accepts 0% to 50%. It starts at 5%.
- Add a price per brick if you want a cost. Leave it blank to see the brick count only.
- Press Calculate. You see the wall area, the area to brick, bricks per square foot, the bricks before waste and the bricks to buy.
Worked example: a double wall with a door and a window
Say you are building a freestanding wall 30 feet long and 9 feet high in queen brick, two layers thick. It has a doorway of 21 square feet and a window of 15 square feet, so you enter 36 square feet of openings. You allow 10% for waste and pay $0.85 a brick.
- Wall area: 30 × 9 = 270 sq ft
- Area to brick: 270 − 36 = 234 sq ft
- Bricks per square foot: queen brick gives 5.625 for one layer, so 11.25 for two layers
- Bricks before waste: 234 × 11.25 = 2,633
- Bricks with waste: 2,633 plus 10% = 2,896
- Estimated cost: 2,896 × $0.85 = $2,461.60
The same wall in Norman brick, one layer, needs only 1,053 bricks before waste and 1,159 with waste, because each Norman brick covers much more of the wall face. Compare total costs, not just the price per brick.
Worked example in meters
A garden wall 6 meters long and 2.4 meters high, with no openings, in modular brick, is 14.4 square meters. Modular brick works out to about 72.7 bricks per square meter for one layer. That gives 1,047 bricks before waste, or 1,099 to buy with the 5% allowance.
| Brick | Bricks per m², single layer |
|---|---|
| Modular | 72.7 |
| Standard | 70.5 |
| Queen | 60.5 |
| King | 51.7 |
| Norman | 48.4 |
| Utility | 32.3 |
These are the US brick sizes in the list, converted to metric. If your bricks have a different size, ask your supplier how many they count per square meter.
How the count is rounded
The calculator rounds the bricks before waste and the bricks with waste up to a whole brick, so you never end up one brick short. Bricks often come in packs or on pallets, so you may need to round up again to a full pack.
Limits of this estimate
- Flat, rectangular walls. For a gable end, a curved wall or steps, split the wall into rectangles, run each one and add the results. The square footage calculator helps with odd shapes.
- Brick face only. Corners, piers, sills and soldier courses use bricks in other ways, so add more waste for them.
- Standard joints. The count assumes 3/8-inch mortar joints. Thicker joints mean slightly fewer bricks, and thinner joints slightly more.
- No mortar, ties or lintels. Work out mortar with the mortar calculator.
This is an estimate for planning. Your supplier or builder can confirm the final quantity before you order.
Common brick estimating mistakes
- Taking off openings twice. Enter the total area of doors and windows once, in the openings box, and use the full wall size for length and height.
- Mixing up the layers. A brick veneer over a frame house is usually one layer. Don’t pick double layer unless the wall really has two wythes of brick.
- Typing openings in feet for a metric wall. With Meters chosen, the openings box takes square meters.
- Ordering exactly the count. Some bricks break in transport or when cut. Ordering short and buying more later can leave you with bricks from a batch that doesn’t match in color.
What next
Use this often? Add Brick to your Home screen.
Frequently asked questions
How many bricks are in a square foot?
About 6.75 modular bricks per square foot of single-layer wall, with standard 3/8-inch mortar joints. Larger bricks need fewer.
How many bricks do I need for a 10 × 10 foot wall?
A 100-square-foot wall needs about 675 modular bricks, or about 709 with 5% extra for waste.
How much extra should I buy?
Buy 5% extra for a simple wall and up to 10% for walls with many cuts, corners or openings. Bricks from a later batch may not match in color.
Does this include mortar joints?
Yes. Each brick size uses its nominal size, which includes a 3/8-inch joint.
How many bricks per square meter?
About 72.7 modular bricks per square meter for a single layer with 3/8-inch joints. Larger bricks need fewer: about 48.4 Norman bricks or 32.3 utility bricks.
How many bricks does a double brick wall need?
Twice as many as a single layer. A two-layer wall in modular brick needs about 13.5 bricks per square foot before waste. Choose Double layer under wall thickness and the calculator doubles the count.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.