Saved

Press the star next to a tool's name to save it.

All my tools

Tyre Pressure Guide

Use this tyre pressure guide to compare your gauge readings with your car's recommended cold tyre pressure, see how much air to add or let out of each tyre, and convert between psi, bar and kPa.

Restored your last values ·

Your gauge readings

Find the recommended cold pressure on the label on the driver's door edge or post, or in the owner's manual, not on the tyre itself. Enter it and each tyre's reading in the same unit.

Everything is worked out in your browser. Nothing you type is sent anywhere.

Tyre pressure check

–

Enter the recommended pressure and your readings, then press Check.

This tyre pressure guide helps you check your car's tyres against the pressure your vehicle maker recommends. Enter the recommended cold pressure from the label on your car, then the reading from your gauge for each tyre, in psi, bar or kPa, and the tyre pressure guide tells you which tyres need air, which have too much, and exactly how much to add or let out. It also converts the recommended pressure between psi, bar and kPa.

How to use the tyre pressure guide

  1. Find your recommended pressure on the Tire and Loading Information label on the driver's door edge or post, or in the owner's manual.
  2. Choose the unit your gauge shows: psi, bar or kPa.
  3. Enter the front pressure, and the rear or spare pressure if the label gives different figures.
  4. Measure each tyre with a gauge and enter the readings.
  5. Press Check to see what each tyre needs.

Where to find the right pressure

The correct pressure for your tyres is the one the vehicle manufacturer lists, not the number printed on the tyre itself. The figure on the sidewall is the maximum permissible inflation pressure the tyre can hold, which is usually well above what your car needs. The recommended pressure is on the Tire and Loading Information label, usually on the edge of the driver's door or the door post, and in the owner's manual. Some vehicles list different pressures for the front and rear tyres, which is why the guide lets you enter separate values, and you can give the spare its own figure if your label lists one.

Check when the tyres are cold

The recommended pressure is a cold inflation pressure. A tyre is cold when it hasn't been driven on for at least three hours. Driving warms the air inside and raises the reading, so to get an accurate result you must measure the pressure when the tyres are cold or allow for the extra pressure in warm tyres. If you've just been driving and think a tyre is underinflated, fill it to the recommended cold pressure anyway: it's safer to drive with air pressure that's slightly lower than recommended than with a tyre that's significantly underinflated. Untick the cold box and the guide reminds you to recheck later.

Adding and letting out air

If a tyre is too low, the difference between its reading and the recommended pressure is the missing pressure you need to add. At a service station, add that amount to each underinflated tyre, then check again. If a tyre is too high, release air slowly by gently pressing on the valve stem with the edge of your gauge until you reach the right pressure. When you're done, check that all the tyres have the same pressure, except where the front and rear are meant to be different.

Worked example

Say your door label says 35 psi front and rear. With the car parked overnight you measure 32 psi front left, 35 psi front right, 36.2 psi rear left and 34.8 psi rear right. The guide says to add 3 psi to the front left and let out 1 psi from the rear left; the other two are fine, because 34.8 psi rounds to the recommended pressure on a gauge that reads in half-psi steps. It also shows that 35 psi is about 2.41 bar or 241 kPa, handy if the pump at the service station uses a different unit.

psi, bar and kPa

Tyre pressure is measured in pounds per square inch (psi) in the US, and in kilopascals (kPa), the metric unit used internationally, or bar in many other countries. One bar is 100 kPa, and one psi is about 6.895 kPa, so one bar is about 14.5 psi.

psibarkPa
302.07207
322.21221
352.41241
382.62262
402.76276

How often to check

Check the pressure of all your tyres, including the spare, at least once a month, when they're cold. It's also a good moment to check the tread on each tyre. Proper inflation saves money as well as being safer: keeping your tyres properly inflated can save you as much as 11 cents per gallon of fuel, and regular rotation, balancing and alignment help tyres last longer.

Tyre pressure warning lights

All passenger cars, light trucks and vans from model year 2008 onward come with a tyre pressure monitoring system (TPMS). It uses sensors in the tyres, or the wheel speed and other vehicle sensors, and lights a warning symbol on the dashboard when a tyre's pressure is below the acceptable level. Pay attention to it, but don't rely on it alone: a monthly check with a gauge catches pressure that's low but not yet low enough to trigger the light.

Common mistakes

  • Using the number on the tyre. That's the maximum, not the recommended pressure.
  • Checking after a drive. Warm tyres read high.
  • Forgetting the spare. It needs checking too.
  • Mixing units. Enter every pressure in the same unit as your gauge.

Tips

  • Keep a gauge in the car rather than relying on service station gauges.
  • Check before long trips and when carrying heavy loads, using the label's figures.
  • Have a tyre that keeps losing pressure inspected.

What next

Use this often? Add Tyre Pressur to your Home screen.

Frequently asked questions

What should my tyre pressure be?

The cold pressure your vehicle maker recommends, shown on the label on the driver's door edge or post and in the owner's manual, not the number on the tyre.

Should I check tyre pressure hot or cold?

Cold, meaning the car hasn't been driven for at least three hours. Warm tyres read higher.

How often should I check tyre pressure?

At least once a month, including the spare.

How does the tyre pressure guide convert psi to bar?

It uses 1 bar = 100 kPa and 1 psi ≈ 6.895 kPa, so 35 psi is about 2.41 bar or 241 kPa.

Is the pressure on the tyre sidewall the right one?

No. That's the tyre's maximum permissible inflation pressure, not the pressure your car needs.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools