A tyre size calculator turns the code on a tyre's sidewall into real measurements. Enter a size such as 205/55R16, and this tyre size calculator shows the section width, sidewall height, overall diameter, circumference and revolutions per mile. Add a second size, and it compares the two and shows how the change would affect your speedometer. It's useful when you're thinking about larger wheels, choosing winter tyres, or trying to find out whether a replacement will fit. US units are the default, with a switch for millimeters and kilometers per hour.
How to use the tyre size calculator
- Choose your units.
- Enter your current size from the sidewall of your tyre.
- Add a new size if you'd like to compare them.
- Press Calculate.
What do the numbers on a tyre mean?
Tyres are described by codes that are generally molded into the sidewall and that specify the tyre's dimensions and key limits. In the size 205/55R16:
- 205 is the nominal section width in millimeters, measured at the widest point from sidewall to sidewall.
- 55 is the aspect ratio. The sidewall height is 55% of the section width.
- R shows that the tyre has a radial construction.
- 16 is the diameter of the wheel rim in inches.
A letter at the start, such as P on a passenger tyre, and the load and speed codes at the end don't affect the calculation, so the tool ignores them.
The tyre size formulas
- Sidewall height = section width × aspect ratio ÷ 100
- Overall diameter = rim diameter + 2 × sidewall height
- Circumference = π × overall diameter
- Revolutions per mile = 1,609,344 mm ÷ circumference in mm
- True speed = speedometer reading × new diameter ÷ old diameter
A worked example
For a 205/55R16 tyre, the sidewall is 205 × 0.55 = 112.75 mm, which is 4.44 inches. The rim is 16 inches, or 406.4 mm, so the overall diameter is 406.4 + 2 × 112.75 = 631.9 mm, or 24.88 inches. The circumference is 78.16 inches, and the tyre turns about 810.7 times per mile.
Now compare it with a 225/45R17, which is a common way of upgrading to a larger wheel. Its sidewall is 101.25 mm and its overall diameter is 634.3 mm, or 24.97 inches. That's 0.38% larger than the original. When your speedometer says 60 mph, your true speed will be about 60.2 mph.
Why overall diameter matters
A car's speedometer and odometer are calibrated for the original tyre size. They work out your speed from how quickly the wheels are turning. Fit a tyre with a larger diameter, and each turn covers more ground, so you travel a little faster than the display shows. A smaller diameter has the opposite effect. Changing diameter can also affect gearing, anti-lock brakes and stability systems, and the clearance between the tyre and the bodywork or suspension.
How to compare two sizes
When you move to a larger rim, you normally need a lower aspect ratio, so that the overall diameter stays about the same. In this example, the rim grows by one inch while the sidewall gets shorter. The calculator flags any difference of more than 3% as a prompt to get expert advice, but it isn't a legal or manufacturer limit. Always check your vehicle's handbook or ask a tyre professional which sizes are approved for your car.
What a lower-profile tyre changes
- Shorter sidewalls usually make steering feel sharper.
- Ride comfort often falls, as there's less sidewall to absorb bumps.
- Wheels are more exposed to damage from potholes and curbs.
- Wider tyres can increase road noise and may raise fuel use.
- Cost tends to rise along with the rim size.
Other codes on your tyre
The tyre load index is a number that's used with a load and inflation table to give the maximum load each tyre can carry at a given pressure. The speed rating is a letter that gives the highest speed the tyre is designed for. Neither of these changes the size, but any replacement must meet or exceed what your vehicle requires. You'll find those requirements in your handbook or on a label, which is often inside the driver's door frame or fuel filler flap.
Tyre or tire?
The spelling “tyre” is used in British and Commonwealth English, and “tire” is used in North America. The word and the measurements are the same, and the codes on the sidewall follow the same pattern in both places.
Checking your tyres while you're at it
While you're looking at your tyres, take a moment to check their condition. Inspect the tread for uneven wear, look for cuts or bulges in the sidewalls, and make sure the pressures match the figures that your vehicle's manufacturer recommends. A correct size only helps if the tyre is in good shape and properly inflated.
Common mistakes
- Comparing only the rim size. Overall diameter is what counts.
- Forgetting clearance. A size can match in diameter and still rub if it's too wide.
- Ignoring load and speed ratings. Check them before you buy.
Related car tools
Plan your driving costs with the trip cost calculator, compare fuels with the petrol vs diesel calculator, and measure a journey with the distance calculator.
What next
Use this often? Add Tyre Size to your Home screen.
Frequently asked questions
How does the tyre size calculator work?
It reads the width, aspect ratio and rim size from the code, then works out the tyre's dimensions.
What does 205/55R16 mean?
It's 205 mm wide, with a sidewall 55% of that width, radial, on a 16-inch rim.
Will a different size change my speedometer?
Yes, if the overall diameter changes. The tool shows the true speed.
Is this also a tyre size converter?
Yes. It gives the results in inches and in millimeters.
Can I fit any size that matches?
Not always. Check your handbook or a tyre professional for approved sizes.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.