A road trip planner works out the timetable for a drive: when you will reach each stop, how long you will spend behind the wheel, when to take a rest break and when you will arrive. List your start, your stops and your destination with the distance between them, set your start time and average speed, and this free road trip planner builds the schedule leg by leg, adds rest breaks automatically and can estimate how much fuel the trip will use and cost.
How to use the road trip planner
- Choose miles or kilometers.
- Set your start time and average speed. Use a realistic average for the whole trip, not the speed limit: towns, traffic and slow roads bring it down.
- List your stops in order. The first row is where you start. For every other row, enter the distance from the previous stop, which you can read from a map app or road sign.
- Add how long you will stay at each stop along the way, such as 45 minutes for lunch or 30 minutes at a viewpoint.
- Set the rest breaks. The default is a 15-minute break after every two hours of driving.
- Add fuel economy and price if you want a fuel estimate.
- Press Plan trip to see the arrival time, the totals and the leg-by-leg timetable.
Your trip is saved in this browser, so you can come back and change a stop or the start time later.
How the timetable is worked out
- Driving time for each leg is the distance divided by your average speed. At 60 mph, a 120-mile leg takes 2 hours.
- Rest breaks are added whenever the driving since your last rest goes over the interval you set. A planned stop that is at least as long as a break counts as a rest, so the count starts again after lunch.
- Stop time is added after you arrive at each stop along the way.
- Arrival times roll on past midnight and show +1 day when the trip runs into the next day.
Why plan rest breaks?
Driving when you are tired greatly increases the risk of a collision. The UK's Highway Code advises drivers to plan journeys with enough breaks, and recommends a break of at least 15 minutes after every two hours of driving. It also advises getting enough sleep before a long journey, not starting a journey if you are tired, and avoiding long drives between midnight and 6 am, when natural alertness is at its lowest. If you feel sleepy, stop somewhere safe. That is why this planner adds breaks automatically and why the arrival time includes them.
Road trip example
You plan a 240-mile drive, starting at 08:00 with an average speed of 60 mph, and stop halfway for a 45-minute lunch.
- Leg 1: 120 miles takes 2 hours, so you arrive for lunch at 10:00 and leave at 10:45.
- Leg 2: another 120 miles takes 2 hours, so you arrive at 12:45.
- The lunch stop counts as your rest, so no extra breaks are needed.
Drive the same 240 miles without stopping and the 4 hours of driving need one 15-minute break, so you would arrive at 12:15. At 25 mpg the trip uses 9.6 gallons of gas; at $3.50 a gallon that is $33.60.
Fuel cost
Enter your car's fuel economy in miles per gallon (or kilometers per liter) and the price of gas, and the planner divides the total distance by the economy to estimate the fuel used, then multiplies by the price. Real use is often higher than the official figure, especially with a full car, air conditioning, hills or high speeds, so it is sensible to add a margin to the budget.
Planning a multi-day road trip
For a trip over several days, plan each day as its own trip: start from the place where you sleep, list that day's stops and finish at the night's hotel. Keep each day's total driving time comfortable, leave time to arrive before dark, and add longer stays at the places you want to see. The total trip time row makes it easy to compare days and move a stop from a long day to a shorter one. If an arrival time shows +1 day, the day is too long: split it or start earlier.
Road trip planning tips
- Be realistic about speed. Use the average your map app gives for the whole route, which already allows for towns and slower roads, rather than the speed limit.
- Start early so you finish in daylight, and avoid driving through the small hours.
- Share the driving on long days, and swap drivers at each break.
- Plan stops with facilities: fuel, food and toilets in one place save time.
- Leave a buffer of at least half an hour for traffic, road works and wrong turns.
- Check the car before you go: tires, oil, coolant and lights.
Related travel tools
Work out the fuel cost of a single drive with the trip cost calculator, convert speeds with the speed converter, and compare local times along the way with the time zone converter.
What next
Use this often? Add Road Trip Pl to your Home screen.
Frequently asked questions
How does the road trip planner work out arrival times?
It divides each leg's distance by your average speed, adds rest breaks and time at stops, and adds it all to your start time.
How often should I take a break on a long drive?
The UK Highway Code recommends a break of at least 15 minutes after every two hours of driving. The planner uses that by default.
Does a lunch stop count as a rest break?
Yes. Any stop at least as long as the break length resets the driving count, so no extra break is added straight after it.
Can the road trip planner estimate fuel cost?
Yes. Enter fuel economy and the price of fuel, and it divides the total distance by the economy and multiplies by the price.
What average speed should I use?
A realistic average for the whole trip, including towns and traffic, which is usually well below the speed limit.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.