A driving time calculator tells you how long a car journey will take. Enter the distance and your average speed, and this driving time calculator works out the time at the wheel, adds rest breaks, and shows when you will arrive if you give a start time. It also works the other way round: give it a time and a speed to find the distance, or a distance and a time to find your average speed.
Driving time formula
Three quantities are linked by one simple rule, so if you know any two you can find the third:
- Time = distance ÷ speed
- Distance = speed × time
- Speed = distance ÷ time
Use matching units: miles with miles per hour, or kilometers with kilometers per hour. The answer for time comes out in hours, and the decimal part is a fraction of an hour, so 2.5 hours is 2 hours 30 minutes, not 2 hours 50.
How to use the driving time calculator
- Choose what to work out: driving time, distance or average speed.
- Choose miles or kilometers.
- Enter the two values you know. The grey numbers in the boxes are only examples.
- Add a start time if you want an arrival time.
- Leave the breaks box ticked to include a 15-minute rest every two hours.
- Press Calculate to see the answer and the working.
Driving time examples
- 240 miles at 60 mph: 240 ÷ 60 = 4 hours at the wheel. With one 15-minute break the journey takes 4 hours 15 minutes, so leaving at 08:00 you arrive at 12:15.
- 3 hours 30 minutes at 55 mph: 55 × 3.5 = 192.5 miles.
- 150 miles in 2 hours 30 minutes: 150 ÷ 2.5 = an average of 60 mph.
- 300 km at 75 km/h: 300 ÷ 75 = 4 hours.
Why plan rest breaks?
Driving when you are tired greatly increases your risk of a collision. The UK's Highway Code advises drivers to plan journeys with enough breaks and recommends a break of at least 15 minutes after every two hours of driving. It also advises against long journeys between midnight and 6 am, when natural alertness is at its lowest. That is why this calculator includes breaks by default and shows both the time at the wheel and the total journey time. Untick the box to see the driving time on its own.
Choosing a realistic average speed
The most common mistake is to use the speed limit. Your average speed covers the whole trip, including intersections, towns, slow trucks and backups, so it is always lower than your cruising speed. A map app's estimate for your route already allows for much of this: divide its distance by its time to find the average it is using. After a similar trip, use the speed mode here to work out the average you really achieved, then use that figure for the next journey.
What can change your driving time?
- Traffic, especially around cities at rush hour and on holiday weekends.
- Road type. Interstates and highways are much faster than mountain roads and small-town routes.
- Weather such as rain, fog or snow, which calls for lower speeds.
- Stops for gas, food, charging or tolls.
- The vehicle, since a loaded van or a car towing a trailer usually travels more slowly.
Planning a longer journey
For a trip with several stops, work out each leg on its own, or use a planner that lists them in order. Leave extra time at the start and end, where traffic is often heaviest, and add a margin of half an hour or more if you need to be somewhere at a fixed time. On a long day, sharing the driving and swapping at each break helps everyone stay alert.
Common mistakes
- Reading decimals as minutes. 1.5 hours is 1 hour 30 minutes.
- Mixing units. Don't divide miles by km/h; convert one of them first.
- Forgetting breaks and stops. The time at the wheel is shorter than the whole journey.
- Using the speed limit instead of a realistic average.
Turning hours and minutes into a decimal
When you work out a distance or a speed by hand, the time must be a single number of hours. Divide the minutes by 60 and add the result to the hours: 45 minutes is 0.75 of an hour, so 2 hours 45 minutes becomes 2.75. To go the other way, multiply the decimal part by 60: 0.4 of an hour is 24 minutes. This calculator does that step for you, which is where most hand calculations go wrong.
Working backwards from an arrival time
If you have to be somewhere by a certain time, start from that time and subtract. Take away the total journey time from this calculator, then take away a margin for parking, finding the entrance or an unexpected delay. For a morning appointment that needs you to leave very early, consider setting off the day before instead. Getting enough sleep before a long drive matters as much as stopping along the way, and if you feel sleepy at the wheel, the safest choice is to stop somewhere safe and rest.
Related travel tools
Plan several stops with the road trip planner, estimate fuel with the trip cost calculator, and switch between km/h and mph with the speed converter.
What next
Use this often? Add Driving Time to your Home screen.
Frequently asked questions
How does the driving time calculator work?
It divides the distance by your average speed to get the time at the wheel, then adds any rest breaks and your start time.
How long does it take to drive 300 miles?
At an average of 60 mph it takes 5 hours at the wheel, or 5 hours 30 minutes with two 15-minute breaks.
How often should I take a break when driving?
The UK Highway Code recommends a break of at least 15 minutes after every two hours of driving.
What average speed should I use?
A realistic average for the whole trip, including towns and traffic. It is always lower than the speed limit.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.