Saved

Press the star next to a tool's name to save it.

All my tools

Transmission Calculator

Use this transmission calculator to find the road speed in each gear from the engine rpm, gear ratios, final drive ratio and tyre diameter, in miles per hour or kilometres per hour.

Restored your last values ·

rpm

Enter the gear ratios of your gearbox (first gear first), the engine speed, the overall diameter of the tyre and the final drive ratio of the axle. You get the road speed in every gear. Add a road speed to see the engine speed needed in each gear.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the gear ratios, engine speed, tyre diameter and final drive, then press Calculate.

A transmission calculator finds the road speed of a vehicle in each gear from the engine speed, the gearbox ratios, the final drive ratio and the size of the tyres. Enter the ratios of your gearbox, and it shows how fast the car goes at a given rpm in every gear. Add a speed to find the engine speed in each gear.

How to use the transmission calculator

  1. Choose US or metric units.
  2. Enter the gear ratios, first gear first, separated by commas.
  3. Enter the engine speed, the tyre diameter and the final drive ratio.
  4. Add a road speed if you want the rpm, then press Calculate.

How a transmission sets the speed

The engine turns at some rpm, the gearbox reduces it by the gear ratio, the axle reduces it again by the final drive ratio, and the wheel turns at the result. The page gives the distance the vehicle travels for each engine revolution as the tyre circumference divided by the transmission ratio times the differential ratio [1]. The vehicle speed is the circumference times the engine speed divided by the same two ratios [1].

The speed formula

In symbols, v = c × n ÷ (g × f), where c is the circumference of the tyre, n the engine speed, g the gear ratio and f the final drive ratio. The circumference is π times the tyre diameter, our own step. With the circumference in inches and the engine speed in revolutions per minute, the result is in inches per minute, and the page says that it can be converted to miles per hour by dividing by 1,056 [1].

Final drive ratio

The final drive, or axle ratio, is the last reduction between the gearbox and the wheels. The page has an example of a final drive ratio of 3.42 to 1, which means that for every 3.42 revolutions of the transmission output, the wheels turn once [1]. The calculator uses it as one multiplier for every gear, so a higher number gives lower speeds at the same rpm and stronger acceleration.

A worked example

Take gear ratios of 3.62, 2.19, 1.41, 1.00 and 0.83, a final drive ratio of 3.42 and a tyre 26 inches high, at 3,000 rpm. The circumference is 81.68 inches. First gear gives 18.74 miles per hour, second 30.98, third 48.12, fourth 67.85 and fifth 81.75. The ratios here are an illustration of ours, not those of a specific car, so enter the numbers from your own handbook.

Metric units

In metric mode, the tyre diameter is in millimetres and the speed in kilometres per hour. The calculator takes the circumference in millimetres, multiplies by the revolutions per minute, divides by the ratios, and then multiplies by 60 and divides by one million to get kilometres per hour, which is our own unit conversion. A tyre 660 millimetres high at 3,000 rpm in a 1 to 1 gear with the 3.42 axle gives 109.1 kilometres per hour.

Engine speed at a given road speed

Turn the formula round to find the rpm: n = v × g × f ÷ c. Enter a road speed, such as 60 miles per hour, and the calculator lists the engine speed in each gear. In the example, fourth gear needs 2,653 rpm at 60 miles per hour and fifth needs 2,202. It is a quick way to judge cruising rpm, noise and fuel use.

Choosing the tyre diameter

Use the overall diameter of the loaded tyre, which depends on the tyre size markings: the wheel diameter plus twice the sidewall height. A taller tyre travels farther in each turn, so it raises the speed at a given rpm and lowers the effective gearing. A change from a 26 inch tyre to a 28 inch tyre raises each speed by about 7.7 percent.

Gear steps

Compare the speeds in neighbouring gears. The ratio between two gear ratios is the step: 3.62 to 2.19 is a step of 1.65, while 1.00 to 0.83 is 1.2. Large steps in the lower gears give strong launch, and small steps at the top keep the engine near its power. Cars with a close-ratio gearbox have small steps, a feature that this calculator makes visible at once.

Gear ratio basics

The page defines the gear ratio of the pitch circles of mating gears as what sets the speed ratio and the mechanical advantage of the gear set, and it notes that a gear train multiplies the ratios of each pair [1]. Idler gears do not change it. That is why the calculator needs only the overall ratio of each gear of your gearbox, and not its internal tooth counts.

Limits

The calculator assumes no wheel slip, no clutch or torque converter slip, and a constant tyre size. Real tyres grow a little at high speed, and the speedometer is often set to read a little high. An automatic transmission with a torque converter will have a lower speed at a given engine speed until the lock-up engages. Use the figures as a guide for gearing choices and not as a legal speed record.

Common mistakes

  • Entering the gear ratios as a percentage. Use plain ratios like 3.62.
  • Using the wheel diameter instead of the tyre diameter. Include the sidewall.
  • Forgetting the final drive. It multiplies every gear.
  • Mixing mph and km/h. Choose the units first.

What next

Use this often? Add Transmission to your Home screen.

Frequently asked questions

What is a transmission calculator?

A tool that finds the road speed of a vehicle in each gear from the engine rpm and the ratios.

What is the formula for speed in a gear?

Speed = tyre circumference × rpm ÷ (gear ratio × final drive ratio).

How do I convert inches per minute to mph?

Divide by 1,056.

Does a bigger tyre change the speed?

Yes, a taller tyre gives a higher speed at the same rpm.

Can I find the rpm for a given speed?

Yes, enter a road speed and read the engine speed in each gear.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools