Saved

Press the star next to a tool's name to save it.

All my tools

RPM Calculator

Use this RPM calculator to find the engine rpm at a given speed, the speed at a given rpm or the transmission ratio from the tyre diameter and the other values.

Restored your last values ·

rpm

Choose whether to find the engine speed, the vehicle speed or the transmission ratio. Enter the other values, including the overall diameter of the tyre. The ratio must include both the gear and the final drive.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to find, fill in the boxes and press Work it out.

See full result

An RPM calculator links the speed of an engine, the speed of the car, the size of the tyres and the transmission ratio. Choose what you want to find, enter the rest, and the calculator gives the engine rpm at a speed, the speed at an engine rpm, or the ratio. It uses standard relations between wheel speed, tyre size and gear ratio, and the same rpm relation also applies to an electric motor. It runs in your browser and nothing you enter is sent anywhere.

How to use the RPM calculator

  1. Choose US or Metric units and what you want to find.
  2. Enter the vehicle speed, the engine speed or the ratio, as the mode requires.
  3. Enter the overall tyre diameter.
  4. Press Work it out.

The formulas

Two relations do the work. The engine rpm equals the wheel rpm times the transmission ratio, because a gear ratio is the ratio of the teeth on the gears and the ratios of stages multiply.[3] The vehicle speed in miles per hour equals the wheel rpm times the tyre diameter in inches, times pi, times 60, divided by 63,360. One turn of the wheel moves the car by the tyre circumference, which is pi times the diameter,[4] the number 60 turns minutes into hours, and 63,360 is the number of inches in a mile.[5] In this method the speed depends only on the wheel rpm and the tyre diameter. The calculator changes kilometres per hour and centimetres to miles per hour and inches, and changes the result back.

The transmission ratio

The calculator does not treat the final drive separately, so the ratio you enter must include both the gearbox ratio of the gear you are in and the ratio of the final drive in the axle. For a car in third gear with a gearbox ratio of 1.3 and a final drive of 3.07, the total ratio is about 3.99, the product of the two ratios. If you know the engine rpm and the speed in a gear, the calculator can find the total ratio of that gear.

Worked examples

Our first example is a car at 60 miles per hour in third gear, with the engine at 3,500 rpm and tyres of size 185/55R15, which have a diameter of 23 inches. The wheel speed is 877 rpm and the transmission ratio is 3.99. In the second example, the same car has larger tyres, 205/45R17, with a diameter of 24.26 inches. At 60 miles per hour, the wheels turn at 831 rpm, and the engine, with the same ratio of 3.99, turns at about 3,318 rpm. Larger tyres therefore lower the engine speed at the same road speed.

Tyre diameter

The overall diameter of a tyre is found from its size code: the sidewall height is the width times the aspect ratio, and the diameter is twice the sidewall plus the rim diameter.[2] For 185/55R15, the sidewall is 185 times 0.55, which is about 102 millimetres, and the diameter is twice that plus 15 inches, which is about 23 inches. This is a theoretical figure, and the maker's data gives the real diameter of a particular tyre.[2] Use the figure in the same units as the rest of the calculation.

What the method leaves out

The method ignores the deflection of the tyre under load, its effective rolling radius and wheel slip, so the result is approximate. The same relation applies to an electric motor. The unit rpm means revolutions per minute, and one rpm is one sixtieth of a hertz.[1]

Uses

You can use the calculator to check whether a gear is suitable for cruising, to see what engine speed a certain road speed needs, and to plan the effect of new tyres or a different final drive. If you change the tyre size, run the calculator before and after and compare the engine speed at the same road speed.

Reading the result

The calculator shows the answer for the mode you chose, and the wheel speed in rpm, which is the speed at which the wheels turn. The wheel speed is useful when you compare tyres, since it depends only on the road speed and the tyre diameter. In the engine rpm mode, the result is shown as a whole number. In the other modes, it is shown with a few figures, which is enough for the accuracy of the method.

Choosing a gear for cruising

A lower engine speed at a given road speed usually means less noise and, in many cars, less fuel used, while a higher speed gives more power in reserve. By finding the engine rpm for each gear at your cruising speed, you can see which gear keeps the engine in the range you want. Look up the ratio of each gear in your manual and include the final drive, then run the calculator once for each gear.

Checking a ratio from a drive

If you do not know the total ratio of a gear, you can find it from a steady drive. Hold a constant speed in that gear, note the speed and the engine rpm from the dashboard or a scan tool, and enter them in the ratio mode with the tyre diameter. Do this on a level road at a steady speed, and use GPS for the true speed, since the speedometer on the dashboard may read a little high.

Common mistakes

  • Using the gearbox ratio alone. Include the final drive.
  • Using the rim size as the tyre diameter. Use the overall diameter.
  • Mixing units. Choose US or Metric first.
  • Expecting the road speed on the speedometer to agree. Speedometers can have their own error.

What next

Use this often? Add RPM to your Home screen.

Frequently asked questions

What is an RPM calculator?

A tool that links engine speed, vehicle speed, tyre diameter and the transmission ratio.

How do you convert rpm to mph?

Speed in mph = wheel rpm × tyre diameter in inches × π × 60 ÷ 63,360.

How do you find engine rpm?

Engine rpm = wheel rpm × the total transmission ratio.

What is the engine rpm at 60 mph in third gear with 23 inch tyres and a ratio of 3.99?

About 3,500 rpm: the wheels turn at about 877 rpm, and 877 times 3.99 gives the engine speed.

Do larger tyres change the rpm?

Yes. At the same road speed, larger tyres turn the wheels more slowly, so the engine runs at a lower rpm.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools