This torque to horsepower calculator works out engine power from torque and speed, or finds the torque needed for a given power. Enter torque in pound-feet, pound-inches or newton-metres, add the speed in rpm and it gives horsepower, kilowatts and metric horsepower. Switch the direction to start from horsepower and find torque instead.
The torque to horsepower formula
hp = torque (lb·ft) × rpm ÷ 5,252
hp = torque (lb·in) × rpm ÷ 63,025
power (W) = torque (N·m) × 2π × rpm ÷ 60
Wikipedia states that when torque is in pound-feet and rotational speed in revolutions per minute, power in horsepower is torque times speed divided by 5,252. The constant 5,252 is the rounded value of 33,000 foot-pounds-force per minute divided by 2π radians per revolution. When torque is in pound-inches the divisor is 63,025. For newton-metres, power in watts is torque times angular speed in radians per second, which is 2π × rpm ÷ 60.
What is a horsepower?
One imperial horsepower is defined as 550 foot-pounds-force per second, or 33,000 foot-pounds-force per minute. That works out to about 745.7 watts. A metric horsepower, often written PS or cv, is the power needed to lift 75 kilograms by one metre in one second, which is 735.49875 watts and about 98.6 percent of an imperial horsepower. An electrical horsepower is exactly 746 watts. This calculator uses the imperial value for horsepower and shows metric horsepower alongside.
How to use the torque to horsepower calculator
- Choose the direction: horsepower from torque, or torque from horsepower.
- Enter the torque (or the horsepower) and the engine speed in rpm.
- Pick the torque unit: pound-feet, pound-inches or newton-metres.
- Press Calculate to see the result in every common unit.
Worked examples
- 300 lb·ft at 5,252 rpm gives 300 × 5,252 ÷ 5,252 = 300 hp. This shows why 5,252 is special: at that speed, torque in lb·ft and power in horsepower are equal. The calculator uses the exact definition of a horsepower, so it shows 299.99 hp, because 5,252 is itself a rounded constant.
- 350 lb·ft at 4,000 rpm gives 350 × 4,000 ÷ 5,252 = 266.6 hp.
- 400 N·m at 4,000 rpm gives about 167.55 kW, which is 224.7 hp.
- 250 hp at 6,000 rpm needs 250 × 5,252 ÷ 6,000 = 218.8 lb·ft, or about 296.7 N·m.
Why power depends on speed
Torque is a turning force, while power is the rate of doing work. An engine that makes the same torque at twice the speed makes twice the power, because the shaft turns through twice the angle each second. That is why engines are often tuned to make their best power at high rpm even when peak torque occurs lower in the range. The calculator needs both numbers because neither one alone fixes the power.
Reading a dyno chart
A dynamometer test reports torque and horsepower across the rev range. Each point on the horsepower line is calculated from the torque at that speed using the formula above. If you read a torque and a speed off the chart, you can check the horsepower yourself. Because the formula includes the constant 5,252 for lb·ft, the two curves plotted on the same axes in these units meet at 5,252 rpm, since there power in hp equals torque in lb·ft.
Converting between units
To change a power figure to other units, such as watts or BTU per hour, use the power converter. For force and torque units see the force converter, and for fastener tightening values the bolt torque calculator.
Engine speed and the shape of the power curve
Because power is torque multiplied by speed, an engine can make high power without making high torque if it turns fast, and it can make high torque without much power if it turns slowly. A diesel truck engine may peak in torque at low rpm and give a modest horsepower figure, while a small high-revving petrol engine gives a similar horsepower with much less torque. The calculator lets you check these relationships with your own numbers, and it works for any rotating machine, not only vehicle engines: electric motors, gearboxes and shafts all follow the same relationship between torque, speed and power.
Electric motors
Motor nameplates often give power in kilowatts or horsepower and speed in rpm. Enter the horsepower and the rated speed to find the shaft torque the motor delivers at that speed. If the nameplate gives the torque in newton-metres, choose that unit and the calculator reports the power in horsepower, kilowatts and metric horsepower. The result is shaft output, not electrical input, so it does not include the losses inside the motor.
Crank and wheel figures
Published engine figures are usually measured at the crankshaft. The power that reaches the wheels is lower because of losses in the gearbox, differential and tyres, so a chassis dynamometer reading is lower than the crank figure for the same car. When you compare two sources, make sure they refer to the same point in the drivetrain. The calculator does not estimate this loss; it converts only the figures you enter.
Common mistakes
- Using the wrong torque unit. 300 lb·ft and 300 lb·in differ by a factor of twelve.
- Mixing metric and imperial horsepower. A PS is about 1.4 percent smaller than a hp.
- Quoting torque and power at different speeds. Use matching figures.
- Confusing crank and wheel figures. Drivetrain losses reduce power at the wheels.
What next
Use this often? Add Torque to Ho to your Home screen.
Frequently asked questions
How do you use a torque to horsepower calculator?
Enter the torque and the engine speed in rpm, choose the torque unit and press Calculate. It uses hp = torque in lb·ft × rpm ÷ 5,252.
What is the formula to convert torque to horsepower?
With torque in pound-feet and speed in rpm, horsepower equals torque times rpm divided by 5,252. With torque in pound-inches the divisor is 63,025.
Why is 5,252 used?
Wikipedia says the constant is the rounded value of 33,000 ft·lbf per minute divided by 2π radians per revolution. At 5,252 rpm, torque in lb·ft and power in hp are equal.
How many watts is one horsepower?
One imperial horsepower is about 745.7 watts. A metric horsepower is 735.49875 watts and an electrical horsepower is exactly 746 watts.
How do you convert horsepower to torque?
Multiply horsepower by 5,252 and divide by rpm to get torque in lb·ft. For example, 250 hp at 6,000 rpm is about 218.8 lb·ft.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.