Saved

Press the star next to a tool's name to save it.

All my tools

0-60 Calculator

Use this 0 60 calculator to turn a car's 0 to 60 mph or 0 to 100 km/h time into average acceleration in m/s² and g, or an acceleration into a time.

Restored your last values ·

Enter a car's 0 to 60 mph time to see its average acceleration, or enter an acceleration in g to see the time. You can also use 0 to 100 km/h.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter a value and press Calculate.

See full result

A 0 60 calculator turns a car's zero to sixty time into its average acceleration, and an acceleration back into a time. Enter the 0 to 60 mph time, or switch to 0 to 100 km/h, and the calculator shows the acceleration in metres per second squared, feet per second squared and g, plus the distance covered during the run at a steady rate.

What 0 to 60 measures

Wikipedia describes the time it takes a vehicle to accelerate from 0 to 60 miles per hour, about 97 km/h or 27 m/s, as a commonly used performance measure for acceleration in the United States and the United Kingdom. In the rest of the world, 0 to 100 km/h, which is 62.1 mph, is used instead. The article notes that present production performance cars are often capable of reaching 60 mph in under 5 seconds, and that some sports cars and electric vehicles can do it in between 2 and 3 seconds.

The 0 60 formula

Average acceleration = change in speed ÷ time
60 mph = 26.8224 m/s; 100 km/h = 27.7778 m/s
Acceleration in g = acceleration ÷ 9.80665 m/s²

Wikipedia defines average acceleration as the change in velocity divided by the duration of the period. Standard gravity, g0, is defined as 9.80665 m/s², about 32.17405 ft/s². The calculator divides the target speed by the time to find the average acceleration, then divides by g0 to express it in g. It also estimates the distance covered with distance = ½ × final speed × time, which holds for steady acceleration.

How to use the 0 60 calculator

  1. Choose what you know: the 0–60 time, or the acceleration in g.
  2. Choose the speed: 0 to 60 mph or 0 to 100 km/h.
  3. Enter the number and press Calculate.

Worked examples

  • 5 seconds to 60 mph: 26.8224 ÷ 5 = 5.36 m/s², which is about 0.55 g. The car covers about 67 metres, or 220 feet.
  • 2.2 seconds: Wikipedia gives this time for the Porsche 918 Spyder. That is 12.2 m/s², about 1.24 g.
  • 1.98 seconds: the Tesla Model S Plaid was measured at this time in June 2021, not including the first foot of rollout. That is about 1.38 g.
  • An average of exactly 1 g: the time to 60 mph is 26.8224 ÷ 9.80665 = 2.74 seconds.
  • 8 seconds to 100 km/h: 27.78 ÷ 8 = 3.47 m/s², about 0.35 g.

How the times are measured

Wikipedia explains that testing is usually done on a closed course with Doppler radar guns and precise timing instruments, and that the car is timed in two opposite directions and the two times are averaged. Many published figures use a rollout, where the timer starts only once the car has travelled 11.5 inches, which reduces the measured time by up to 0.3 seconds. When you compare two cars, check that both times were measured the same way.

Why the average hides the peak

A car does not accelerate evenly. It may launch hard, then lose time in a gear change, and acceleration usually falls as speed builds because air resistance grows and the engine's torque is spread over higher gears. The calculator gives the average over the whole run. The peak acceleration felt by the driver can be higher, especially in electric cars that deliver full torque from a standstill.

What g means for passengers

An acceleration of 1 g pushes you back into your seat with a force equal to your own weight. Most everyday driving uses a small fraction of that. Expressing a 0 to 60 time in g makes it easy to compare a car with other things you know, such as a roller coaster launch or a sprinter's start. For other speed conversions, use the speed converter, and for engine power see the torque to horsepower calculator.

From acceleration to time

The calculator also works the other way. If you know a car's average acceleration in g, it tells you how long the car takes to reach 60 mph or 100 km/h. This is handy when you read a road test that gives a g figure, or when you want to see what a target acceleration means in seconds. An average of half a g takes about 5.5 seconds to reach 60 mph, while an average of 1.5 g, which only the very quickest cars reach, takes about 1.8 seconds.

Comparing two cars fairly

When you compare times from different sources, check three things: the target speed, whether rollout was included, and whether the figure is a manufacturer's claim or an independent test. Wikipedia points out that launch control on some exotic cars has made published 0 to 60 times less representative of normal driving, since the same cars are slower from 5 mph to 60 mph. A calculator cannot fix those differences, but converting times into g makes the size of a gap easier to judge.

History of the measure

The 0 to 60 time has been part of car reviews for decades. Wikipedia credits Tom McCahill with starting to publish 0 to 60 mph times in 1946 while writing for Mechanix Illustrated, and the measure has been a headline number ever since.

Common mistakes

  • Mixing 0–60 mph and 0–100 km/h times. 100 km/h is a little faster than 60 mph.
  • Comparing times with and without rollout. The difference can be up to 0.3 seconds.
  • Treating the average as the peak. Real acceleration varies during the run.
  • Using the distance as exact. It assumes steady acceleration.

What next

Use this often? Add 0-60 to your Home screen.

Frequently asked questions

How does a 0 60 calculator work?

It divides 60 mph, which is 26.8224 m/s, by the time to give the average acceleration, then divides by 9.80665 m/s² to express it in g.

What 0 to 60 time equals 1 g?

An average of exactly 1 g reaches 60 mph in about 2.74 seconds.

How fast do cars go from 0 to 60?

Wikipedia says present production performance cars often do it in under 5 seconds, and some sports cars and electric vehicles in 2 to 3 seconds.

What is rollout in 0 to 60 times?

Some tests start the timer only after the car has moved 11.5 inches, which Wikipedia says reduces the time by up to 0.3 seconds.

Is 0 to 100 km/h the same as 0 to 60 mph?

No. 100 km/h is 62.1 mph, so a 0 to 100 km/h time is slightly longer.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters