Saved

Press the star next to a tool's name to save it.

All my tools

Wind Load Calculator

Use this wind load calculator to estimate the force of a steady wind on a wall, roof or sign from the wind speed, area and angle, with the dynamic pressure shown.

Restored your last values ·

°
kg/m³

Choose US or metric units, then enter the wind speed and the area of the surface. Add the angle, the air density or a shape factor if you know them. You get the dynamic pressure and the force on the surface.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the wind speed and the area, then press Calculate.

See full result

A wind load calculator estimates the force that a steady wind puts on a wall, a roof, a sign or any flat surface. Enter the wind speed and the area, and it gives the dynamic pressure and the load in newtons and pounds-force. This is a textbook estimate, not a design value.

How to use the wind load calculator

  1. Choose US or metric units.
  2. Enter the wind speed and the surface area.
  3. Add the angle, air density or shape factor if you know them.
  4. Press Calculate.

What wind load means

Wind load is the force that moving air exerts on a surface that is in its way. For tall buildings it is often the dominant load, and design wind speeds come from regional standards [3]. This tool gives a simple estimate from the wind speed and the surface area, aimed at roofs, signs and similar surfaces. It assumes that the wind blows parallel to the horizon, and the result is a general estimate and not a substitute for a structural engineer or the local building code.

Dynamic pressure

The first step is the dynamic pressure, the kinetic energy of the moving air per unit volume. The formula is q = ½ ρ v², where ρ is the air density and v the wind speed [1]. Wikipedia states that it is measured in pascals [1]. Because the speed is squared, doubling the wind speed makes the pressure four times larger, which is why a storm is so much more damaging than a breeze.

From pressure to force

The tool then multiplies the dynamic pressure by the effective surface, which is the total surface times the sine of the angle: wind load = dynamic pressure × total surface × sin(angle). This simple projection is our own working. The angle is measured between the surface and the horizon, so it is the pitch for a roof and 90 degrees for a vertical wall. A surface that lies flat in the wind, at 0 degrees, receives no load in this simple model, so the calculator asks for an angle above zero.

Air density

The tool uses 1.225 kilograms per cubic metre as the default air density, the standard value at sea level and 15 degrees Celsius [2]. Change it for very hot, very cold or high places. Air density decreases with altitude [2], so thinner air means a lower density, and so a smaller load for the same wind speed. Leave the box blank for the default or type your own.

A worked example

Take a wind of 100 miles per hour on a vertical wall of 10 by 10 feet. The dynamic pressure is about 1,224 pascals, which is 25.564 pounds per square foot, and the load on the 100 square feet is about 2,556 pounds. Enter 100 for the speed and 100 for the area in US mode, and you get 11,372 newtons, or 2,556.5 pounds-force. The small difference in the last digit comes from rounding in the unit conversions.

Other wind speeds

At 50 miles per hour the same wall has 6.391 pounds per square foot, or 639 pounds, and at 70 miles per hour it has 12.527 pounds per square foot, or 1,253 pounds. Notice how a wind only twice as fast brings four times the load. A pressure of 20 pounds per square foot goes with a wind of about 88.5 miles per hour. You can check that with the calculator by working backwards.

The shape factor

The formula has no drag or shape coefficient, which means that it implicitly takes the factor as 1. Real surfaces differ: a rounded body is pushed less than a flat plate, and a roof can be pulled up by suction, which this tool does not model. We added an optional shape factor C that multiplies the load, and it defaults to 1. The value of C for a real shape is our own addition and must come from a reliable table or from an engineer.

The angle

The angle changes the effective area. A roof with a pitch of 30 degrees has an effective area of half of its surface, because the sine of 30 degrees is 0.5. For the example above with 100 square feet at 30 degrees, the load falls to about 1,278 pounds-force. This is the simple projection that the page uses, and real pressures on roofs depend on the pitch, the wind direction and the shape of the building.

Units

In US mode, the speed is in miles per hour and the area in square feet. In metric mode, they are kilometres per hour and square metres. Internally the calculator converts the speed to metres per second, and the area to square metres. The result is given in newtons and in pounds-force, and the pressure in pascals and in pounds per square foot, using 1 pascal = 0.020885 pounds per square foot.

What is left out

This is not a design tool. Building codes use design wind speeds from regional standards, return periods such as 50 years, the exposure of the terrain, the height above ground and the shape of the building, and many also include a safety factor [3]. None of these are in this calculator. Use the result to get a feel for the size of the force, to compare two wind speeds, or to check a homework answer, and ask a licensed engineer for anything that people depend on.

Common mistakes

  • Using a speed in the wrong unit. Check mph or km/h.
  • Measuring the angle from the vertical. It is measured from the ground.
  • Forgetting that the load grows with the square of the speed. A gust matters a great deal.
  • Treating the result as a design load. Real designs need a code and an engineer.

What next

Use this often? Add Wind Load to your Home screen.

Frequently asked questions

What is a wind load calculator?

A tool that estimates the force of a steady wind on a surface from the wind speed and the area.

How is wind load worked out?

Dynamic pressure is half the air density times the wind speed squared, and the load is that pressure times the area times the sine of the angle.

How much force is a 100 mph wind on a 10 by 10 ft wall?

About 2,556 pounds, from a pressure of 25.564 pounds per square foot.

Can I use this wind load calculator to design a structure?

No. It leaves out gusts, suction, exposure and codes, so a licensed engineer must check real designs.

Why does a small rise in wind speed matter so much?

Because the speed is squared, a wind twice as fast pushes four times as hard.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools