Saved

Press the star next to a tool's name to save it.

All my tools

Wheel Horsepower Calculator

Use this wheel horsepower calculator to estimate the horsepower that reaches the wheels from the engine power and the drivetrain efficiency, and see the power lost.

Restored your last values ·

hp
%
%
%
%
%

Enter the engine power and the efficiency of the drivetrain, either as one figure or built up from the gearbox, differential and shafts. The calculator gives the power at the wheels and the power lost.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the engine power and the drivetrain efficiency, then press Find wheel horsepower.

See full result

A wheel horsepower calculator estimates the power that reaches the wheels from the power of the engine, by taking away the losses in the drivetrain. Enter the crankshaft power and the drivetrain efficiency, as one figure or as the efficiencies of the parts, and the calculator gives the wheel horsepower and the power lost. It uses plain efficiency arithmetic, which is our own working, with the terms defined as in the encyclopedia article on horsepower.[1] It runs in your browser and nothing you enter is sent anywhere.

How to use the wheel horsepower calculator

  1. Enter the engine power, which is the crank or brake horsepower.
  2. Choose rear-wheel or front-wheel drive.
  3. Enter the overall efficiency of the drivetrain, or choose to build it from the parts and enter each one.
  4. Press Find wheel horsepower.

The formula

The power at the wheels is the efficiency of the drivetrain times the power of the engine, which follows from the definition of efficiency as power output divided by power input.[2] The power lost is the power of the engine minus the power at the wheels, which is one minus the efficiency, times the engine power. Brake horsepower is measured on a dynamometer before the losses in the drivetrain, and wheel horsepower is what remains after the losses in the transmission, joints, differential, wheel bearings and tires.[1] So use the figure from the engine, not a figure that has already lost power in the gearbox.

Building up the efficiency

The efficiency of the whole drivetrain is built from its parts, which are multiplied together, as is usual for parts that pass the power on one after another (our own working). For a front-wheel-drive car, the efficiency is that of the gearbox times that of the differential times that of the front driveshafts. For a rear-wheel-drive car, a propeller shaft is added, so the efficiency is the gearbox times the propeller shaft times the differential times the rear driveshafts. A front-wheel-drive layout has no propeller shaft, so it has one part fewer to lose power. The calculator lets you enter each part as a percentage, and leaves out any that you leave blank.

Worked examples

The first example is a rear-wheel-drive car with an engine of 660 brake horsepower and a typical drivetrain efficiency of 0.8173, which is 81.73 percent. The power at the wheels is 660 times 0.8173, which is about 539.4 horsepower, and the loss is about 120.6 horsepower, or 18.3 percent. In a second example, a car with an engine of 118 horsepower and a measured 95 horsepower at the wheels has lost 118 minus 95, which is 23 horsepower. Its efficiency is then about 80.5 percent.

The efficiency of the parts

This tool does not supply figures for the efficiency of each part, and the 0.8173 in the first example is only a typical figure for a rear-wheel-drive car. Components such as bearings, gear meshes and joints each lose a little, and the method shows how these combine, but the numbers are left to you. If you use the parts, take the figures from the maker of your gearbox and axle, or use the overall figure from a measurement of your own car.

All-wheel drive

This tool has no separate formula for all-wheel or four-wheel drive. An all-wheel-drive car has more parts that turn, so its losses are usually larger, but the calculator has no figure for it. If you use the overall mode for such a car, enter an efficiency that you have measured on a dynamometer or that the maker gives.

Reading the result

The calculator shows the power at the wheels, the power lost in the drivetrain, the loss as a percentage and the efficiency of the drivetrain. If you entered the efficiencies of the parts, the last figure is their product, which lets you see how small losses in each part add up to a much larger total. For example, four parts at 95, 98, 96 and 97 percent give a combined efficiency of about 86.7 percent.

Why wheel power is lower

The engine makes its power at the crankshaft, and the power has to pass through the clutch or the torque converter, the gearbox, the shafts and the differential before it reaches the wheels. Every gear mesh, bearing and joint wastes a little as heat, which is the loss the calculator models by multiplying the efficiencies of the parts. On a dynamometer that measures power at the wheels, the reading is therefore lower than the figure that the maker quotes for the engine.

Using the result

You can use the calculator to guess what a car with a given engine power will read on a dynamometer, or to guess the engine power from a reading at the wheels, by choosing the efficiency that you think is right and working back. Divide the wheel power by the efficiency to get the engine power. Keep in mind that the efficiency changes from car to car, and with the temperature, the oil and the load.

Common mistakes

  • Using wheel power as the engine power. The input is the crank horsepower.
  • Entering the loss instead of the efficiency. An efficiency of 82 means a loss of 18.
  • Counting the propeller shaft in a front-wheel-drive car. It has none.
  • Treating the result as measured. It is an estimate.

What next

Use this often? Add Wheel Horsep to your Home screen.

Frequently asked questions

What is a wheel horsepower calculator?

A tool that estimates the power at the wheels from the engine power and the drivetrain efficiency.

How do you calculate wheel horsepower?

Wheel horsepower = drivetrain efficiency × engine horsepower.

How much power does a 660 bhp rear-wheel-drive car have at the wheels?

About 539 hp with a typical efficiency of 0.8173.

Which drive type is the most efficient?

Front-wheel drive, because it has no propeller shaft.

What is the drivetrain loss?

Engine power minus wheel power. For 118 hp at the crank and 95 hp at the wheels, that is 23 hp.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools