Saved

Press the star next to a tool's name to save it.

All my tools

Boost Horsepower Calculator

Use this boost horsepower calculator to estimate engine power after adding a supercharger or turbocharger, from the current power and the boost pressure in psi.

Restored your last values ·

psi

Enter the power of the naturally aspirated engine and the boost your supercharger or turbocharger adds, in psi. The calculator estimates the power of the boosted engine, in the same unit as the power you entered.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the engine power and the boost pressure, then press Estimate boosted power.

See full result

A boost horsepower calculator estimates how much power an engine makes after you add a supercharger or a turbocharger. Enter the power of the engine as it is now and the boost pressure in psi, and the calculator gives the boosted power, the gain and the pressure ratio. It runs in your browser and nothing you enter is sent anywhere.

How to use the boost horsepower calculator

  1. Enter the engine power before boosting, in horsepower or any other unit of power.
  2. Enter the boost pressure in psi.
  3. Press Estimate boosted power.
  4. Read the boosted power, the gain and the pressure ratio.

The formula

The calculator uses one formula, which is our own simplified working: the boosted power equals the boost pressure plus 14.7, divided by 14.7, times the power before boosting. The number 14.7 is the standard atmospheric pressure in pounds per square inch, about 14.696 psi [1]. Boost means that the intake air pressure is higher than the surrounding atmosphere [2], and forced induction raises the density of the intake air, so more air mass reaches the combustion chamber [2]. The part in front is the pressure ratio: with no boost, it is 1, and the engine makes its normal power. With a boost of 14.7 psi, the engine takes in air at twice atmospheric pressure, and the formula gives twice the power. Between those values, the power rises in proportion to the pressure ratio.

What boost means

The boost is the pressure above the outside air that the supercharger or turbocharger forces into the engine. A supercharger compresses the intake air and is usually driven by a belt from the engine's crankshaft [3]. A turbocharger does the same job but is powered by the kinetic energy of the exhaust gases [4]. The calculator is meant for either, since it uses only the boost pressure.

Worked example

Take an engine that makes 200 horsepower and add a boost of 6 psi, which is the calculator's default. The pressure ratio is 20.7 divided by 14.7, which is 1.408. The boosted engine makes 200 times 1.408, or about 281.6 horsepower, a gain of about 81.6. At 9 psi, the ratio is 1.612, and the same engine makes about 322 horsepower. These figures are our own use of the formula.

The limits of the model

The calculator works on a simplified model, and real results may differ from the prediction. The formula takes no account of the heat of the compressed air, the efficiency of the charger, the altitude or the engine's tune. A boosted engine also needs enough fuel delivery, and boost pressures that are higher than the engine can safely withstand cause damage [4]. Treat the result as a first estimate and check it on a dynamometer.

Before you add boost

More power puts more load on the engine, the gearbox, the clutch and the brakes. The fuel pump and the injectors may need to be bigger, and the engine management may need a new tune. Talk to a specialist in your engine before you decide. Our other calculators for fuel injectors, torque and compression ratio can help with the details.

Reading the result

The calculator shows the boosted power, the gain and the pressure ratio. The gain tells you how much extra power the boost is expected to bring, and the ratio shows what fraction of the extra air you are adding. If the engine power is in kilowatts, the result is in kilowatts, and if it is in horsepower, the result is in horsepower, since the formula only scales the number you enter. The ratio is the same whichever unit you use.

Comparing boost levels

Try several boost pressures to see how the power changes. Because the formula is a straight line in the boost, each extra psi adds the same amount, about 6.8 percent of the original power, which is one divided by 14.7. This makes it easy to compare a mild setup with a stronger one. A higher number may look attractive, but remember that every extra psi puts more load on the engine and needs more fuel.

Wheel power and crank power

The power of an engine is usually given at the crankshaft, while a dynamometer test measures the power at the wheels, which is lower because of losses in the drivetrain. Use the same kind of figure for the starting power as you want in the result, and do not mix them. If you know the figure only at the wheels, the answer is also a figure at the wheels, in the same proportion.

Altitude and air density

A boosted engine fills its cylinders with denser air, and the same idea explains why a naturally aspirated engine loses power in thin air. A supercharger can be seen as artificially increasing the density of the air by compressing it, and air at 30,000 feet has about one third of the density of air at sea level [3]. This is why the same boost gives a different result on a mountain road than at the coast, and why the calculator is only a first estimate. Use it to compare setups on the same day and at the same place, not to promise a figure.

Common mistakes

  • Using the total pressure. Enter the boost above atmospheric pressure, not the absolute pressure.
  • Mixing power units. The result is in the same unit as the input.
  • Expecting an exact figure. It is an estimate.
  • Forgetting fuel. The engine needs more fuel with more air.

What next

Use this often? Add Boost Horsep to your Home screen.

Frequently asked questions

What is a boost horsepower calculator?

A tool that estimates the power of an engine after boost is added, from its current power and the boost pressure.

How do you calculate horsepower from boost?

Boosted power = (boost in psi + 14.7) divided by 14.7, times the power before boosting.

How much power does 6 psi add?

The pressure ratio is 1.408, so an engine of 200 hp would make about 282 hp, a gain of about 82.

What boost do superchargers usually run?

It depends on the setup, and our calculator accepts any boost in psi. Check the safe limit for your own engine.

How accurate is the result?

It is a simplified model. Real results can differ, and the engine also needs enough fuel.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools