This thread calculator works out the basic dimensions of ISO metric and Unified inch screw threads. Choose a standard size such as M8 or 1/4-20, or enter any diameter and pitch, and the thread calculator gives the pitch diameter, minor diameter, thread height and, for metric threads, the thread depth and an approximate tap drill size.
How to use the thread calculator
- Choose the thread system: ISO metric, Unified (inch) or custom.
- Choose the size and coarse or fine pitch, or enter the major diameter and pitch.
- Press Calculate.
The thread profile
ISO metric and Unified threads share the same basic 60° V profile. Wikipedia's articles on both give the height of the fundamental triangle as H = 0.866025 × P, where P is the pitch, the distance from one thread crest to the next. From that come the basic diameters:
- Pitch diameter = major diameter − 0.649519 × P
- Minor diameter = major diameter − 1.082532 × P
For metric threads, the thread depth is 0.54125 × P. For inch threads, the pitch is 1 divided by the threads per inch (TPI).
Tap drill size
The Wikipedia article on ISO metric threads notes that the tap drill size can be approximated by subtracting the pitch from the major diameter, since the difference between the major and minor diameters is about 1.0825 × P. For an M8 × 1.25 thread, that's 8 − 1.25 = 6.75 mm. The calculator shows this approximation for metric threads.
Standard sizes
The calculator includes the ISO 262 selected metric sizes from M1 to M64 with their coarse and fine pitches, such as M6 × 1 and M6 × 0.75, M8 × 1.25 and M8 × 1, and M10 × 1.5 and M10 × 1.25. For inch threads, it includes the UNC and UNF threads from #0 to 1½ inch, such as 1/4-20 UNC and 1/4-28 UNF. Wikipedia notes that numbered sizes have a major diameter of the number × 0.013 inch + 0.060 inch, so a #10 screw is 0.190 inch across.
Worked example
An M8 coarse thread has a pitch of 1.25 mm. Its pitch diameter is 8 − 0.649519 × 1.25 = 7.188 mm, its basic minor diameter is 8 − 1.082532 × 1.25 = 6.647 mm, and H is 1.083 mm. A 1/4-20 UNC thread has a pitch of 1/20 = 0.05 inch, a pitch diameter of 0.25 − 0.649519 × 0.05 = 0.2175 inch and a minor diameter of 0.1959 inch.
Reading the results
The big number is the basic pitch diameter. The table shows the thread designation, the major diameter, the pitch, the minor diameter, the triangle height H and, for metric threads, the thread depth and approximate tap drill.
Coarse and fine threads
Most sizes come in a coarse and a fine pitch. A fine thread has a smaller pitch, so it has more threads in the same length and a slightly larger minor diameter for the same major diameter. In ISO metric, an M10 bolt is 1.5 mm pitch coarse or 1.25 mm fine; in Unified threads, a 1/4-inch bolt is 20 TPI (UNC) or 28 TPI (UNF).
Custom threads
Choose Custom to enter any major diameter and pitch, in millimeters or inches. This is useful for sizes not in the lists, such as less common metric sizes, or for checking a thread you've measured with a gauge. For inch threads, enter the pitch as 1 divided by the threads per inch: 13 TPI is a pitch of 0.0769 inch.
Why the pitch diameter matters
The pitch diameter is where the thread's flanks are half way between crest and root, and it's the diameter at which a bolt's and a nut's threads meet. The major diameter is the outside of the bolt's threads and the minor diameter the bottom of them.
Inch example
A #10-24 UNC screw has a major diameter of 0.190 inch and a pitch of 1/24, about 0.0417 inch. Its pitch diameter is 0.190 − 0.649519 × 0.0417 = about 0.1629 inch, and its basic minor diameter about 0.1449 inch.
Identifying an unknown thread
To identify a thread, measure the major diameter across the crests with calipers and count the threads over a known length, or use a thread pitch gauge. Compare the results with the metric and inch lists: a bolt about 6.35 mm across with 20 threads per inch is a 1/4-20 UNC, while one about 6 mm across with a 1 mm pitch is an M6 coarse thread.
Metric thread depth
For ISO metric threads, the calculator also shows the thread depth, 0.54125 times the pitch, which Wikipedia gives for the basic profile. For an M8 × 1.25 thread, that's about 0.677 mm.
Fine metric example
An M10 × 1.25 fine thread has a pitch diameter of 10 − 0.649519 × 1.25 = about 9.188 mm and a basic minor diameter of about 8.647 mm, compared with 9.026 mm and 8.376 mm for the M10 × 1.5 coarse thread. The approximate tap drill is 8.75 mm for the fine thread and 8.5 mm for the coarse one.
Common mistakes
- Confusing pitch and TPI. Pitch is the distance between threads; TPI is how many per inch.
- Mixing coarse and fine. Check which the bolt or nut uses.
- Using basic sizes as finished sizes. Real threads have tolerances.
- Drilling the major diameter. That's the clearance size, not the tap drill.
Tips
- Use a thread pitch gauge to identify unknown threads.
- Measure the major diameter with calipers on the crests.
- Check the tap maker's chart for the exact tap drill.
What next
Use this often? Add Thread to your Home screen.
Frequently asked questions
How does a thread calculator work?
It uses the 60° thread formulas: pitch diameter = D − 0.649519P and minor diameter = D − 1.082532P.
What is the pitch diameter of M8 × 1.25?
About 7.188 mm.
What tap drill do I need for M8?
About 6.75 mm, using D − P.
How do I convert TPI to pitch?
Pitch = 1 ÷ threads per inch; 20 TPI is a 0.05-inch pitch.
What is the diameter of a #10 screw?
0.190 inch: the number × 0.013 + 0.060.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.