Saved

Press the star next to a tool's name to save it.

All my tools

Thermal Expansion Calculator

Use this thermal expansion calculator to find how much a part grows or shrinks in length, area or volume when its temperature changes, and the thermal stress if it is held in place.

Restored your last values ·

× 10⁻⁶ per K
GPa

Choose US or metric units and what to find. Pick a material or enter your own linear coefficient, then the starting size and the two temperatures. For thermal stress enter Young's modulus in gigapascals instead of a size.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to find, fill in the boxes that appear and press Calculate.

See full result

A thermal expansion calculator shows how much an object grows or shrinks when its temperature changes. Choose the change in length, area or volume, pick a material or enter a linear coefficient, and give the starting size and the two temperatures. It also finds the thermal stress that builds up in a part that is held so that it cannot expand.

How to use the thermal expansion calculator

  1. Choose US or metric units.
  2. Pick what to find and the material.
  3. Enter the starting size and the two temperatures.
  4. Press Calculate.

The linear formula

The change in length is ΔL = a L₁ (T₂ − T₁), where a is the linear expansion coefficient, L₁ the starting length and T₂ − T₁ the change in temperature. The standard estimate is written ΔL ÷ L = α ΔT [1]. Both mean that a longer part, a larger change in temperature or a larger coefficient give a larger change in length.

Copper pipe example

Take a copper pipe of 12 metres that is heated by 60 kelvin, with a = 17 × 10⁻⁶ per kelvin. The change is 0.01224 metres, about 1.2 centimetres. The calculator gives 0.01224 metres, or 12.24 millimetres, and shows that the pipe grows to 12.012 metres. Use the Copper choice and the two temperatures, 20 and 80 degrees Celsius, to reproduce it.

Cooling and shrinking

A negative temperature change gives a negative change in length. A second example is a steel pipe of 6 metres that is cooled by 85 kelvin with a = 12.0 × 10⁻⁶ per kelvin, so it shortens by 0.00612 metres, 6.12 millimetres. The calculator shows the minus sign and says that the part shrinks. A change in Celsius or kelvin is the same size, while one in Fahrenheit is multiplied by 5/9 by the calculator.

Area expansion

For isotropic materials the area coefficient is two times the linear one, αA = 2 αL, and ΔA ÷ A = αA ΔT [1]. So ΔA = 2 α A ΔT. For a plate of 2 square metres with α = 23.1 × 10⁻⁶ per kelvin heated by 100 kelvin, the area grows by 0.00924 square metres.

Volume expansion

For isotropic materials the volumetric coefficient is three times the linear coefficient [1], so ΔV = 3 α V ΔT. A cubic metre of glass with a = 8.5 × 10⁻⁶ per kelvin heated by 100 kelvin grows by 0.00255 cubic metres. Isotropic means that the material expands equally in every direction. Wood, for example, expands differently along and across its grain.

The materials list

The material choices use the coefficients in Wikipedia's table near 20 °C, in 10⁻⁶ per kelvin: aluminium 23.1, concrete 12, copper 17, glass 8.5, ice 51, silver 18 and steel 12, the middle of the 11 to 13 that the table gives for steel [1]. Coefficients depend on the exact alloy and the temperature, so use your own value from a data sheet when it matters.

Thermal stress

If a part cannot expand freely because it is held by a rigid body, stress builds up. The stress is σ = E α ΔT, where E is Young's modulus, for a part attached to a rigid body [2]. Heating then gives a compressive force [2]. For steel with E = 200 GPa, α = 12 × 10⁻⁶ per kelvin and ΔT = 50 kelvin, σ is 120 MPa. The modulus is an input from a data sheet.

Units

In US mode, sizes are in feet, square feet or cubic feet and temperatures in degrees Fahrenheit. In metric mode they are in metres and degrees Celsius. The coefficient is always per kelvin, which is the same as per degree Celsius. The stress is shown in megapascals and in psi, using 1 MPa = 145.04 psi, which is our own conversion.

Limits

Real coefficients change with temperature, and a big temperature range needs more than a constant value. The linear estimate is accurate for small relative changes. A bridge, a railway or a pipe run needs expansion joints that a designer sizes from the code, so treat the result as an educational estimate.

Practical examples

A long pipe, a steel rail, a concrete slab or a window frame all change in size over a year. A steel part of 6 metres changes by about 6 millimetres for a swing of 85 kelvin, which is why long runs have gaps, loops or sliding supports. Use the area mode for a sheet or a plate, and the volume mode for a tank or a liquid in a container. Remember that a liquid and its container expand by different amounts, so the level can still change.

Thermal stress in practice

If a part cannot move, the force needed to hold it is the stress times the cross-section area. A stress of 120 MPa in steel, from a 50 kelvin rise, is large compared with the strength of many structural steels, which is why rigid joints with a big temperature swing can buckle or crack. Heating gives compression in a held part, and cooling the opposite [2]. This calculator gives the stress only, and does not check it against any strength limit.

Choosing the coefficient

The materials list is a quick start with typical values from Wikipedia's table [1], and real materials vary around them. If your design needs a precise result, take the coefficient for your exact alloy and temperature range from a supplier's data sheet, and enter it as your own coefficient. The calculator accepts any value in millionths per kelvin, including the negative values of a few special alloys.

Common mistakes

  • Using Fahrenheit with a Celsius coefficient. The calculator converts the change for you in US mode.
  • Using the volume factor on an anisotropic material. Wood and some crystals expand unevenly.
  • Forgetting that a held part develops stress. It cannot grow, so it pushes back.
  • Mixing the coefficient units. Enter it in millionths per kelvin.

What next

Use this often? Add Thermal Expa to your Home screen.

Frequently asked questions

What is a thermal expansion calculator?

A tool that finds the change in size of an object when its temperature changes.

What is the formula for linear thermal expansion?

ΔL = α L ΔT, the coefficient times the starting length times the change in temperature.

How do I calculate thermal stress?

σ = E α ΔT for a part held rigidly, with E the Young's modulus; heating gives compression.

How are area and volume expansion related to the linear coefficient?

The area coefficient is 2 α and, for isotropic materials, the volume coefficient is 3 α.

Why do different sources give different coefficients?

The value depends on the exact alloy, the temperature range and the measurement; steel, for example, ranges from 11 to 13 millionths per kelvin.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools