Saved

Press the star next to a tool's name to save it.

All my tools

Bulk Modulus Calculator

Use this bulk modulus calculator to find how much a material is compressed by a pressure, the bulk modulus from a measured compression, or the speed of sound from the modulus and density.

Restored your last values ·

Choose a material or enter your own bulk modulus. Find how much its volume changes under a pressure, find the modulus from a measured volume change, or find the speed of sound in a fluid from its modulus and density.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you want and fill in the boxes, then press Calculate.

See full result

A bulk modulus calculator finds how much a material is compressed by a pressure, or the bulk modulus from a measured compression. It also finds the speed of sound in a fluid from its bulk modulus and its density. It has the values for water, steel, granite and other materials, or you can enter your own.

How to use the bulk modulus calculator

  1. Choose what you want and the material.
  2. Enter the pressure and, for the modulus, the volume change.
  3. Press Calculate.

The definition

The bulk modulus is defined as K = −V dP ÷ dV, the ratio of a small increase in pressure to the resulting relative decrease in volume [1]. It is usually positive. It measures how resistant a material is to being compressed from all sides: a high bulk modulus means a material that is hard to compress. It is the same as the density times the change of pressure with density [1].

Compressibility

The inverse of the bulk modulus gives the compressibility of a substance [1]. For water, with a bulk modulus of 2.2 gigapascals, the compressibility is about 4.5 × 10⁻¹⁰ per pascal. The calculator shows the compressibility when you find the modulus from a measured change. A material that is easily compressed has a high compressibility and a low modulus.

Typical values

The page gives a table of approximate values: diamond 443 gigapascals at 4 kelvin, steel 160, granite 50, rubber 1.5 to 2, and water 2.2 gigapascals, a value that rises at higher pressures [1]. Air has 142 kilopascals when it is compressed adiabatically and 101 kilopascals when it is compressed isothermally [1]. The calculator has these values built in, with a rubber value at the middle of its range.

Volume change

For a small change, the relative volume change is ΔV ÷ V₀ = ΔP ÷ K. The page gives an example: a material with K = 35 gigapascals loses 1 percent of its volume under a pressure of 0.35 gigapascals, about 3,500 bar [1]. The calculator reproduces it. Water at 100 megapascals, roughly the pressure at 10 kilometres depth, loses about 4.5 percent by this formula, which is a rough figure because the modulus changes.

Finding K

If you have measured the change of volume under a known pressure, the bulk modulus is K = ΔP ÷ (ΔV ÷ V₀). This finite form is our own rearrangement of the definition, since the page gives only the differential form. A pressure of 350 megapascals that compresses a sample by 1 percent gives 35 gigapascals. The result is also shown in psi.

Speed of sound

In a fluid, the bulk modulus and the density determine the speed of sound by the Newton–Laplace formula, c = √(K ÷ ρ) [1]. The square root is not visible in the text of the page that we read, so we took the standard form. For water, √(2.2 × 10⁹ ÷ 1,000) = 1,483.2 metres per second. The calculator gives the speed also in feet per second.

Solids

For a solid, the speed of a pressure wave also depends on the shear modulus, so the formula c = √(K ÷ ρ) is not exact for solids. The calculator gives 4,514.7 metres per second for steel with a density of 7,850 kilograms per cubic metre, but that is only a rough figure. The page notes that, in solids, the adiabatic and isothermal moduli are very similar [1].

Gases

A gas is easy to compress, so its bulk modulus is small. For an ideal gas, the isothermal modulus is equal to the pressure, and the adiabatic modulus is the pressure times the heat capacity ratio γ [1]. For air, the page gives 142 kilopascals for the adiabatic case [1]. The calculator offers that value, in gigapascals, in the list of materials.

Limits

The simple formula assumes that the modulus is constant, so it is accurate only for small changes in volume. If the calculated change is 10 percent or more, the calculator warns you. If the pressure is as large as the modulus itself, the formula gives a volume change of 100 percent or more, which is impossible, and the calculator refuses.

Using the calculator

Pick the mode and the material. Enter the pressure in megapascals, and the volume change in percent or the density in kilograms per cubic metre as needed. For another material, choose the last option and type the modulus in gigapascals. Compare water, steel and air to see how widely the values differ.

Compression of water in the deep sea

At a depth of 4 kilometres, the pressure of the water is about 40 megapascals, a rough figure of our own. With a modulus of 2.2 gigapascals, the linear formula gives a compression of 1.8 percent, so the density of deep sea water is about 2 percent higher than at the surface. The effect is small, but it matters for sound speeds and for accurate oceanography, which use more exact equations of state.

Common mistakes

  • Mixing GPa and MPa. The pressure is in MPa, the modulus in GPa.
  • Using the formula for big volume changes. The modulus changes.
  • Confusing the bulk modulus with Young's modulus. They are different.
  • Using c = √(K/ρ) for a solid. It is only for fluids.

What next

Use this often? Add Bulk Modulus to your Home screen.

Frequently asked questions

What is a bulk modulus calculator?

A tool that finds the compression of a material under pressure from its bulk modulus.

What is the bulk modulus formula?

K = −V dP ÷ dV, or K = −ΔP ÷ (ΔV ÷ V₀) for a finite change.

What is the bulk modulus of water?

About 2.2 GPa.

What is the compressibility?

The inverse of the bulk modulus, 1 ÷ K.

How is the speed of sound related to K?

In a fluid, c = √(K ÷ ρ).

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools