This rivet size calculator works out the rivet diameter and length for joining sheets of metal with solid rivets, using common aircraft sheet-metal rules of thumb. Enter the thickness of each sheet, and the rivet size calculator gives the rivet diameter, the rivet length, the dash numbers, and the edge distance and spacing to lay out the rivets.
How to use the rivet size calculator
- Choose inches or millimeters. Inches are the default.
- Enter the thickness of each sheet being joined, two or three sheets.
- Press Calculate.
Choosing the rivet diameter
An Aviation Pros review of aircraft riveting gives the general rule that the rivet's shank diameter should be not less than three times the thickness of the thicker sheet being joined. The calculator multiplies the thicker sheet by three and, in inches, rounds up to the next 1/32 inch, since Wikipedia notes that inch rivet diameters come in 1/32-inch steps.
Choosing the rivet length
The same review says the rivet's shank length is found by measuring the combined thickness of the materials, the grip, and adding 1½ times the rivet's shank diameter. The extra length is what forms the shop head when the rivet is driven. In inches, the calculator rounds the length up to the next 1/16 inch, the step Wikipedia gives for rivet lengths.
diameter ≥ 3 × thickest sheet
length = grip + 1.5 × diameter
Dash numbers
Wikipedia explains that inch rivets are often described by dash numbers: the first gives the diameter in 32nds of an inch and the second the length in 16ths. A dash 3 dash 4 rivet is 3/32 inch in diameter and 4/16 (1/4) inch long. The calculator shows the dash numbers for the rivet it suggests.
Edge distance and spacing
The review also gives layout rules: rivets should be no less than two and no more than four shank diameters from the edge of the sheet, and no closer than three or (normally) further than ten diameters from each other. Diagonal pitch between staggered rows is usually 75% of the row pitch, with a minimum of 2½ diameters.
Worked example
Joining a 0.032-inch sheet to a 0.040-inch sheet: three times the thicker sheet is 0.120 inch, so the next 1/32-inch size is 1/8 inch (4/32). The grip is 0.072 inch, and adding 1.5 × 0.125 = 0.1875 gives 0.2595 inch, rounded up to 5/16 inch. That's a -4-5 rivet. Edge distance should be 1/4 to 1/2 inch, and spacing 3/8 to 1¼ inches, with diagonal pitch at least 5/16 inch.
Reading the results
The big number is the rivet diameter. The table shows the rivet length, the grip, the dash numbers (for inches), and the ranges for edge distance and pitch, plus the minimum diagonal pitch.
Metric rivets
In millimeters, the calculator gives the exact diameter and length from the rules without rounding to a standard size, since metric rivet sizes vary by supplier. Wikipedia notes that for general use, metric rivet diameters from 2 to 20 mm and lengths from 5 to 50 mm are common, and that the stated diameter relates to the drill size for the hole. Choose the next size up that your supplier stocks.
Why the rules use the thicker sheet
A rivet that's too small for the sheets it joins can shear or pull through, while one that's too large for thin sheets can damage them when it's driven. Basing the diameter on the thicker sheet gives a rivet strong enough for the joint, and the edge distance and pitch rules keep enough metal around each hole so the sheet doesn't tear out. Rivets too close together weaken the sheet along the line of holes, and rivets too far apart let the sheets separate between them.
Thin sheets
For very thin sheets, three times the thickness can come out below the smallest rivet sizes you can buy. In that case, use the smallest standard rivet that suits the job and keep to the edge distance and spacing rules for that diameter. For example, two 0.020-inch sheets give a minimum of 0.060 inch, so the calculator suggests a 1/16-inch (2/32) rivet.
Hole size
Wikipedia notes that rivet holes are ideally drilled 4 to 6 thousandths of an inch larger than the rivet's diameter, so the rivet slides in but fills the hole when it's driven. A hole that's too large lets the rivet bend or the joint work loose.
Three sheets
When three sheets are stacked, enter all three. The diameter still comes from the thickest one, but the grip is the total of all three, so the rivet needs to be longer to reach through and still form a good shop head.
Common mistakes
- Using the thinner sheet. The diameter rule uses the thicker sheet.
- Forgetting the shop head allowance. Add 1½ diameters to the grip.
- Rivets too close to the edge. Keep at least two diameters.
- Ignoring approved data. Aircraft repairs follow the repair manual.
Tips
- Measure sheet thickness with a micrometer.
- Lay out the pattern on paper first.
- Practice on scrap before riveting the real part.
What next
Use this often? Add Rivet Size to your Home screen.
Frequently asked questions
How does a rivet size calculator work?
It sets the diameter to at least three times the thicker sheet and the length to the grip plus 1½ diameters.
What size rivet for 0.032 and 0.040 sheet?
A 1/8-inch rivet, 5/16 inch long (-4-5).
How long should a rivet be?
The total thickness of the sheets plus 1½ times the rivet diameter.
What is the edge distance for rivets?
No less than two and no more than four rivet diameters from the edge.
What do rivet dash numbers mean?
The first is the diameter in 32nds of an inch and the second the length in 16ths.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.