Saved

Press the star next to a tool's name to save it.

All my tools

Quarter Mile Calculator

Use this quarter mile calculator to estimate the elapsed time and trap speed of a car from its weight and peak power, or the power implied by a time or speed, with three formulas.

Restored your last values ·

s

Enter the total weight of the car with the driver and its peak power to estimate the quarter-mile time and trap speed, or enter a measured time or speed to estimate the power. All three formulas are shown.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to find, fill in the boxes shown and press Calculate.

See full result

A quarter mile calculator estimates how fast a car covers a quarter of a mile and how fast it is going at the end, from its weight and its peak power. It can also run backwards, finding the power that a measured time or speed implies, using three classic formulas.

How to use the quarter mile calculator

  1. Pick US or Metric and what you want to find.
  2. Enter the total weight with the driver.
  3. Enter the peak power, or the measured time or trap speed, depending on the mode.
  4. Press Calculate and compare the three formulas.

The three formulas

The tool shows three classic estimates, named after Huntington, Fox and Hale. Fox's 1973 paper in the American Journal of Physics treats drag racing with introductory mechanics, using energy, momentum, acceleration, torque and power [4]. The elapsed time is ET = a × (weight ÷ power)^(1/3), and the trap speed is b × (power ÷ weight)^(1/3), with weight in pounds and power in horsepower. The constants a and b are 6.290 and 224 for Huntington, 6.269 and 230 for Fox, and 5.825 and 234 for Hale. These are the commonly quoted constants, and we could not check them against the original papers.

Which one to trust

We do not rank the three formulas, because we found no source that does. For that reason the calculator shows all three, so you can see the spread. They differ by a few tenths of a second, which is itself a good reminder that the result is an estimate.

A worked example

Take a car of 1,638 lb plus a 150 lb driver, so 1,788 lb, with about 975 hp. The three formulas give 7.699 s at 183 mph, 7.673 s at 187.9 mph and 7.130 s at 191.2 mph. These are our own sample runs of the formulas. Switch to Metric, and the same car is 811 kg and about 727 kW, with the same answer.

Running it backwards

Solving the time formula for power gives power = weight × (a ÷ ET)³, and solving the speed formula gives power = weight × (speed ÷ b)³. These two rearrangements are our own working. A car of 1,788 lb that runs 7.673 s on Fox's constant implies about 975 hp, which closes the loop with the example.

Units and conversions

The classic constants use pounds and horsepower, so this calculator converts metric inputs first. A pound is exactly 0.45359237 kg [2], a mile is exactly 1.609344 km [3], and one horsepower is 745.69987158227022 W, or about 745.7 W [1]. Metric mode takes kilograms, kilowatts and km/h, converts to the classic units, and shows the answer back in your units.

What the formulas leave out

The equations are first-order approximations from weight and power alone. They ignore aerodynamic drag, tyre grip, rolling resistance, gearing, the moment of inertia of the drivetrain, the centre of gravity and the driver's reaction time. They also assume that the engine holds its peak power for the whole run, which is hard to achieve at launch. A real car can run a second slower on bad tyres.

Power at the clutch or at the wheels

The power in the formulas is the peak power at the engine or clutch, and drivetrain losses mean the power at the wheels is lower. If you only know the wheel power from a dyno, the estimate will be too pessimistic. The weight should include the driver and anything else in the car, because the formulas use the weight that has to be accelerated.

Using the trap speed

The speed at the end of the quarter mile depends less on the launch than the elapsed time does, so the power from the trap speed is often the steadier estimate. If your elapsed time and your trap speed give very different powers, the launch or the traction is probably the cause, rather than the engine. Compare the two modes for your own timing slip.

Sensible inputs

Use the weight as it was at the track, with the fuel, the driver and the passengers. Use a peak power figure that has been measured if you can, since the cube root makes the result fairly forgiving: a 10 percent error in power changes the elapsed time by about 3 percent. Do not expect to match a timing slip to the hundredth of a second.

Quarter-mile examples to try

A light car of 2,400 lb with 200 hp gives an elapsed time of about 14.4 seconds on Fox's constant, and a trap speed near 100 mph. A heavy sedan of 4,000 lb with 300 hp is slower, at about 14.9 seconds and 97 mph, and a 3,000 lb sports car with 450 hp runs in about 11.8 seconds at 122 mph. These are our own sample runs of the formula, so treat them as illustrations and compare them with real timing slips.

Why the cube root

Both formulas depend on the ratio of weight to power raised to the power one third. Doubling the power does not halve the time: it cuts the elapsed time by about 21 percent, and raises the trap speed by about 26 percent. This is why big gains in power are needed for small gains at the strip, a pattern that follows directly from the cube root.

Common mistakes

  • Leaving out the driver. The formulas use the total weight, including the driver.
  • Mixing power at the wheels with power at the clutch. The classic constants assume the engine figure.
  • Treating the time as exact. It is a first-order estimate.
  • Entering the speed in the wrong unit. Check the US and Metric switch.

What next

Use this often? Add Quarter Mile to your Home screen.

Frequently asked questions

What is a quarter mile calculator?

A tool that estimates a car's quarter-mile time and trap speed from weight and power.

What formula does a quarter mile calculator use?

ET = a × (weight ÷ power)^(1/3), with a = 6.290, 6.269 or 5.825 for Huntington, Fox and Hale.

Which formula is the most accurate for a modern car?

We do not rank them. The calculator shows all three so that you can compare.

Can it find horsepower from a quarter-mile time?

Yes, with power = weight × (a ÷ ET)³, our own rearrangement of the formula.

Does it include drag and traction?

No, it uses weight and power only.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools