Saved

Press the star next to a tool's name to save it.

All my tools

Poissons Ratio Calculator

Use this Poissons ratio calculator to find Poisson's ratio from measured strains, or from Young's modulus with the shear modulus or bulk modulus, and see the other modulus.

Restored your last values ·

Choose how you want to work. With strains, enter the axial and the transverse strain from a test. With moduli, enter Young's modulus and either the shear modulus or the bulk modulus of an isotropic material, in the same unit.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what you know and fill in the boxes, then press Calculate.

See full result

A Poissons ratio calculator finds the ratio between the sideways strain and the lengthways strain of a stretched or squeezed material. Enter the two measured strains, or Young's modulus together with the shear modulus or the bulk modulus, and it gives the ratio, tells you whether it is a sensible value and works out the other modulus.

How to use the Poissons ratio calculator

  1. Choose what you know: strains, E and G, or E and K.
  2. Enter the values. Moduli can be in any pressure unit if both use the same one.
  3. Press Calculate.
  4. Read Poisson's ratio, the comment on its size and the other modulus.

What Poisson's ratio is

When you stretch a rubber band, it gets thinner. When you press on a block of rubber, it bulges out sideways. Poisson's ratio measures this effect as the ratio of the sideways strain to the lengthways strain. It is the transverse strain divided by the axial strain, with tension counted as positive and compression as negative. Wikipedia defines it with a minus sign, ν = −dε_trans ÷ dε_axial, so that the usual case gives a positive number [1].

The two ways to find it

The calculator has three routes. The first uses strains that you have measured. The second uses Young's modulus and the shear modulus of an isotropic material [1]. The third, from Young's modulus and the bulk modulus, is plain algebra on the relation that Wikipedia gives, and is our own working. Choose whichever pair of values you actually have.

From strains

If a bar is pulled so that its length grows by 0.2 percent, the axial strain is 0.002. If its width shrinks by 0.05 percent, the transverse strain is −0.0005. The ratio is −(−0.0005) ÷ 0.002 = 0.25. This is our own example. Wikipedia counts extension as positive strain and contraction as negative [1]. The calculator keeps the signs that you type, so make sure that the axial and transverse strains have opposite signs for an ordinary material.

From E and G

For an isotropic material, Young's modulus, the shear modulus and Poisson's ratio are related by E = 2G(1 + ν) [1]. Solving for the ratio gives ν = E ÷ (2G) − 1. With E = 200 and G = 80, in any unit such as gigapascals, ν = 200 ÷ 160 − 1 = 0.25. Gigapascals are typical, but any pressure unit works if both values use the same one. The calculator also gives the bulk modulus that goes with the result.

From E and K

Wikipedia gives the bulk modulus of an isotropic material as K = E ÷ [3(1 − 2ν)] [1]. Rearranging, 1 − 2ν = E ÷ 3K, so ν = ½ − E ÷ (6K). This exact rearrangement is our own working. With E = 200 and K = 160, ν = 0.5 − 200 ÷ 960 = 0.2917. The calculator then gives the shear modulus as G = E ÷ [2(1 + ν)], here 77.42, which is the relation from the previous section turned around.

What range is possible

Most materials have a ratio between 0 and 0.5, with 0.5 being an incompressible material. Wikipedia is more exact: for a stable, isotropic, linear elastic material the ratio must lie between −1 and +0.5, so that the moduli stay positive [1]. The calculator comments on the result. A value outside that range is flagged, because it usually means that the inputs are in the wrong order or come from different materials.

Typical materials

Wikipedia notes that rubber has a ratio of nearly 0.5, which is why it hardly changes in volume when squeezed, and that cork has a ratio close to 0, so that it can be pushed into a bottle neck without swelling sideways [1]. Steel is about 0.27 to 0.30 in the page's table [1]. The calculator tells you whether your result is close to one of these cases, which is a handy check when you compare a test with a handbook.

Auxetic materials

Some materials have a negative ratio. Wikipedia calls them auxetic: when stretched in one direction, they get thicker in the perpendicular direction [1]. It is often assumed that the ratio is always positive, which holds for ordinary materials but not for these. The calculator accepts a negative result and names it. If you did not expect an auxetic material, check the signs of your strains first, as an error there gives a negative ratio.

Where the ratio is used

Poisson's ratio appears in the stress and strain formulas of beams, pressure vessels and soil, and in wave speeds in solids, so many engineering formulas ask for it. Engineers use it to convert between the moduli when a data sheet gives only some of them. The calculator can do that conversion and nothing else: it does not give a stress, a deflection or any safety margin for a part.

Limits of the calculator

The relations between E, G and K hold for isotropic materials, whose properties are the same in every direction. Wood, composites and rolled metals are often not isotropic, and each direction then has its own ratio. Strains from a real test also have errors, and a small axial strain makes the ratio very sensitive. Use the result as an estimate, and take material data for design from a tested source.

Common mistakes

  • Mixing up the strains. Axial is along the force; transverse is across it.
  • Using different units for E and G. Use the same pressure unit for both.
  • Ignoring the sign of the strains. Opposite signs give a positive ratio.
  • Using the formulas for wood or composites. They hold for isotropic materials only.

What next

Use this often? Add Poissons Rat to your Home screen.

Frequently asked questions

What is a Poissons ratio calculator?

A tool that finds Poisson's ratio from measured strains or from the elastic moduli of a material.

What is the formula for Poisson's ratio?

ν = −ε transverse ÷ ε axial. For isotropic materials, E = 2G(1 + ν) also gives it.

What range can Poisson's ratio have?

For a stable isotropic material, between −1 and +0.5; most materials lie between 0 and 0.5.

What is a negative Poisson's ratio?

An auxetic material, which gets thicker across when it is stretched.

Can I use any units for E and G?

Yes, if both use the same pressure unit.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools