Saved

Press the star next to a tool's name to save it.

All my tools

Steel Weight Calculator (TMT Bars)

Enter the bar diameter, length and quantity, and this steel weight calculator shows the weight per bar and in total for TMT bars and rebar, in pounds or kilograms.

Restored your last values ·

The result is a theoretical weight. Actual bars vary slightly within manufacturing limits.

Total steel weight

–

Enter a diameter and length.

See full result

A steel weight calculator tells you how much a round bar weighs before you buy it or lift it. Enter the diameter, the length of each bar and the number of bars, and this steel weight calculator works out the weight per bar and the total. It's suited to TMT bars, rebar and other solid round steel. The tool opens in US units, with inches, feet and pounds, and you can switch to millimeters, meters and kilograms. Add a price per unit of weight, and you'll get a rough material cost as well.

How to use the steel weight calculator

  1. Choose US or Metric.
  2. Enter the bar diameter.
  3. Enter the length of each bar.
  4. Enter the number of bars, or leave it blank for one bar.
  5. Add a price if you'd like a cost estimate, then press Calculate weight.

The steel weight formula

  • Weight per meter (kg) = diameter in mm × diameter in mm ÷ 162
  • Weight of one bar = weight per meter × length in meters
  • Total weight = weight of one bar × number of bars

This is a well-known site rule, and it comes from the volume of a cylinder and the density of steel. A bar is a long cylinder, so its volume is the area of its circular cross-section multiplied by its length. Steel usually has a density of between 7,750 and 8,050 kilograms per cubic meter. Using 7,850 gives a figure very close to dividing the diameter squared by 162.

Steel weight examples

A 12 mm bar weighs 12 × 12 ÷ 162, or about 0.889 kg per meter. Ten bars that are each 12 meters long total about 106.67 kg. In US units, a bar 0.5 inches across and 20 feet long weighs about 13.38 pounds, so ten of them come to about 133.8 pounds. Doubling a bar's diameter makes it four times as heavy, because the weight depends on the diameter squared.

What are TMT bars and rebar?

Rebar, short for reinforcing bar, is a steel bar added to concrete and masonry to strengthen them. Concrete is strong when it's squeezed but much weaker when it's pulled, and the steel provides that missing strength in tension. The most common type is carbon steel, made as hot-rolled round bars with raised patterns embossed on the surface, which help the bar to grip the concrete. TMT, or thermo-mechanically treated, bars are a common kind of reinforcing bar in many countries. Their ribs have little effect on the calculation, so the nominal diameter is used.

Why weight matters on site

Steel is usually bought by weight, while a structural drawing lists bars by size and length. Converting from one to the other lets you estimate an order, compare quotations and check deliveries. Weight also matters for handling and transport, since a large order may need a crane or a truck rated for the load. Knowing the weight per bar helps your team to plan safe manual handling as well. Remember to allow for overlaps, bends and cut-off waste, all of which increase the total length that you need.

How to estimate the total length

Start with the bar schedule from your structural drawings, which lists each bar's size, shape, length and quantity. Group the bars by diameter, and then calculate each group separately, as a single average diameter won't give a correct result. Add the groups together to get your overall weight. Many builders then add a small allowance for waste. The right allowance depends on the job and on how the bars are cut, so ask your engineer or contractor to suggest a figure.

Theoretical and actual weight

This calculator gives a theoretical weight based on the nominal diameter. Real bars are made within allowed tolerances, so an actual bar may be slightly lighter or heavier. If you buy by actual weight, the weighbridge figure may differ a little from your estimate. Coated bars also add some weight. For hollow sections, plates and shaped steel, this formula doesn't apply, as they aren't solid round bars.

Choosing bar sizes

The right diameter and spacing for a slab, beam or column is a structural decision that depends on the loads, the span and the local building code. This calculator only tells you what a chosen bar weighs, and it can't tell you whether that bar is suitable for your project. Always follow the drawings from a qualified engineer. Small changes in a bar's size can make a real difference to both strength and cost, so a substitution should be checked by the person responsible for the design.

Comparing supplier prices

Steel may be quoted per pound, per kilogram, per ton or per bar. To compare offers fairly, convert them all to the same basis. Enter the price per unit of weight here to see a total, and then remember to add cutting, bending, delivery and any taxes that apply.

Common mistakes

  • Mixing up diameter and radius. The formula uses the full diameter.
  • Using the wrong units. The 162 rule needs millimeters and meters.
  • Forgetting laps and bends. These add length to what you order.
  • Averaging different bar sizes. Work out each diameter separately.

Estimate your mix with the concrete calculator, find quantities with the cement calculator, and change units with the weight converter.

What next

Use this often? Add Steel Weight to your Home screen.

Frequently asked questions

How does the steel weight calculator work?

It multiplies the diameter in millimeters by itself, divides by 162 to get kilograms per meter, then multiplies by length and number.

What is the D²/162 formula?

It is a site rule for the weight of round steel bars, in kilograms per meter, with the diameter in millimeters.

How much does a 12 mm bar weigh?

A 12 mm bar weighs about 0.889 kg per meter.

Can I use feet and inches?

Yes. The tool opens in US units, and you can switch to Metric.

Does the formula work for square bars?

No. It is only for solid round bars.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools