Saved

Press the star next to a tool's name to save it.

All my tools

Ionic Strength Calculator

Use this ionic strength calculator to find I = ½ Σ c z² for a mixture of ions or a single salt, with a Debye–Hückel limiting law estimate of the activity coefficient.

Restored your last values ·

Enter each ion with its concentration in mol/L and its charge, one per line, or describe a single salt by its concentration and the numbers and charges of its ions. The ionic strength is half the sum of concentration times charge squared.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the ions or the salt, then press Calculate.

An ionic strength calculator measures the total concentration of ions in a solution, weighted by the square of their charges. Enter each ion with its concentration and charge, or describe one salt, and it gives the ionic strength in moles per litre together with an activity coefficient estimate for dilute solutions.

How to use the ionic strength calculator

  1. Choose a list of ions or a single salt.
  2. Enter each ion's concentration and charge, or the salt's concentration and its ions.
  3. Press Calculate.

The formula

The molar ionic strength is I = ½ Σ cᵢ zᵢ², where cᵢ is the concentration of ion i in mol/L and zᵢ is its charge number [1]. The factor one half is there because the sum includes both cations and anions [1]. Because the charge is squared, ions with higher charges count much more, and the sign of the charge does not matter.

Simple salts

For a 1:1 electrolyte such as sodium chloride, the ionic strength equals the concentration [1]. For magnesium sulfate, a 2:2 salt, it is four times the concentration, I = ½ [c(+2)² + c(−2)²] = 4c [1]. For sodium sulfate, with two sodium ions and one sulfate, it is ½ (2c + 4c) = 3c, which is our own arithmetic from the formula. Use the single-salt mode for these cases, where the answer depends only on the concentration and the stoichiometry.

A mixed solution

The page works through a solution that is 0.050 M in sodium sulfate and 0.020 M in potassium chloride, assuming complete dissociation: I = ½ [0.050 × 2 × 1 + 0.050 × 1 × 4 + 0.020 × 1 × 1 + 0.020 × 1 × 1] = 0.17 M [1]. To reproduce it, enter four lines: 0.1 1 for sodium, 0.05 −2 for sulfate, 0.02 1 for potassium and 0.02 −1 for chloride. Each line is the concentration of the ion itself, so the sodium line is twice the salt concentration.

Molal form

The page also gives a molal form, I = ½ Σ bᵢ zᵢ², where b is in moles per kilogram of solvent, and recommends it for non-ideal solutions because volumes are no longer strictly additive [1]. At low concentration in water the two forms are almost the same, and this calculator takes the concentrations as you enter them.

Activity coefficients

The Debye–Hückel limiting law connects the ionic strength to the activity coefficient. The single-ion form is ln γᵢ = −A zᵢ² √I [2], and for water at 25 °C the constant is 0.509 in base-10 logarithms, in units of kilograms and moles to the power one half [2]. The calculator shows the coefficient for a singly charged ion, which for I = 0.01 is about 0.89. The law applies only at very low concentrations, typically below 10⁻³ mol/L, and the extended form is stated to be accurate up to about 0.1 [2]. Beyond that, the page says, the Pitzer equations should be used [2].

Why it matters

Ionic strength sets how strongly ions screen each other, so it changes solubility, reaction rates of ionic reactions and the activity of buffers. Biochemists quote it for buffers and media because enzyme activity and protein stability depend on it. The calculator lets you compare recipes before you prepare them.

Limits of the calculation

The model treats every salt as fully dissociated, which is a good approximation for strong electrolytes at low concentration but not for weak acids or for ion pairs such as magnesium sulfate. For a weak electrolyte, enter the concentrations of the ions that are actually present.

Preparing a solution of a target ionic strength

Buffers and media are often specified by ionic strength, and you can work backwards from the formula. For a 1:1 salt such as sodium chloride you need a concentration equal to the target. For a salt with doubly charged ions, a quarter of the target concentration is enough, because the charge enters as a square. Add the contributions of every component, including the buffer salts, then use the single-salt mode to check each one before you mix them.

Reading the activity coefficient

An activity coefficient below one means that the ions behave as if they were less concentrated than they are, because their neighbours screen them. The limiting-law value falls as the ionic strength rises and as the charge increases. For an ion of charge two, the exponent is four times larger than for charge one, so the effect is far greater. Use the figure only as a rough guide at the very dilute end, and take measured values for stronger solutions.

Checking your input

If the answer looks too large, check that you entered each ion's own concentration and not the salt's, and that you did not enter the same ion twice. A quick test is that the charges in the list should balance: the sum of concentration times charge over the cations should equal that over the anions.

Common mistakes

  • Entering the salt concentration for each ion. Each ion needs its own concentration, so multiply by the number of ions per formula unit.
  • Leaving out the charge sign. The sign does not change the result, but the size does.
  • Ignoring spectator ions. Every ion in the solution counts.
  • Using the limiting law at high concentration. It is valid only when the solution is very dilute.

What next

Use this often? Add Ionic Streng to your Home screen.

Frequently asked questions

What is an ionic strength calculator?

A tool that computes I = ½ Σ c z² from the concentrations and charges of the ions in a solution.

What is the ionic strength of 0.1 M NaCl?

0.1 M. For a 1:1 electrolyte the ionic strength equals the concentration.

What is the ionic strength of magnesium sulfate?

Four times its concentration, because both ions have a charge of 2.

What is the ionic strength of 0.050 M Na₂SO₄ with 0.020 M KCl?

0.17 M, as worked on the Wikipedia page.

When does the Debye–Hückel limiting law apply?

Only for very dilute solutions, typically below 0.001 mol/L.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Physics & Science Tools