A crawl ratio calculator multiplies the gearing of a four-wheel-drive vehicle to give its overall low-speed ratio. Enter the first gear, the transfer case low range and the axle ratio, or use the ring and pinion teeth, and read the crawl ratio.
How to use the crawl ratio calculator
- Enter the first-gear ratio of the transmission.
- Enter the transfer case low-range ratio.
- Enter the axle ratio, or the ring gear and pinion teeth.
- Press Calculate.
The crawl ratio formula
The crawl ratio is the first-gear ratio times the transfer case low-range ratio times the axle ratio, or TG x TCR x AGR. This is the general rule for gear trains: the total reduction is the product of the reductions of each stage [1]. Low-range gears in a transfer case let a vehicle drive at much slower speeds while the engine stays in its usable speed range, and they increase the torque available at the axles [3]. The higher the crawl ratio, the more the engine's turning effort is multiplied at the wheels and the slower the vehicle can creep.
Axle ratio from the teeth
The gear ratio between the input and output of a differential is called the axle ratio or diff ratio, and many vehicles get a gearing reduction by having fewer teeth on the pinion than on the ring gear [2]. Dividing the ring gear teeth by the pinion teeth to get the number is our own working. If the axle ratio is not known, enter the teeth, for example 41 and 11, and the tool divides them to get 3.727 to 1. If you fill in both the axle ratio box and the teeth boxes, the tool uses the axle ratio.
The first example
Take a setup with a first gear of 2.46, a low range of 2.72 and an axle of 3.73. Multiplying the three stage ratios [1] gives 2.46 x 2.72 x 3.73 = 24.958, which is about 25 to 1. The tool gives 24.96 to 1 and tells you it is about 25 to 1. A figure like this is typical for a car or a light truck, not for a vehicle that is built for rock crawling. The example numbers are ours.
A Jeep example
Take a TJ-style setup with a first gear of 3.83, a low range of 2.72 and an axle of 4.10: 3.83 x 2.72 x 4.10 = 42.7 to 1. The tool shows 42.71 to 1, about 42.7. A modern Rubicon-style setup with a first gear of 4.46, a low range of 4.0 and an axle of 4.10 gives 73.1 to 1. These are our own arithmetic with figures that vary by model and year, so use the numbers from your own manual. Each result is the product of the three ratios [1].
What the numbers mean
The tool shows where your figure falls in broad bands: about 40 to 50 for moderate trails and fire roads, 50 to 60 for intermediate trails, 60 to 80 for technical rock crawling, and 80 to 100 and more for extreme use. These bands are an off-road rule of thumb that is our own working, not a standard, and none of our sources states them. Low-range gearing is meant for very slow work such as rock crawling and towing a heavy load slowly [3].
Why guides disagree
Guides do not agree on what is a low, high or ideal ratio, and no official source states a safe maximum. A rock crawler, a daily driver and a tow vehicle each want something different, so the bands are a starting point only.
What the ratio leaves out
The crawl ratio is gearing only. It does not include the tyre diameter, the engine torque or the engine speed, and so it does not give a ground speed or a pulling force. Tyre size, in particular, changes the effective gearing in practice, but the tool does not try to model it. The gear-ratio article describes torque multiplication through gears but gives no tyre correction [1].
Automatic transmissions
The formula works with the first gear ratio and the transfer case ratio, so the figure is clearest for manual gearboxes. An automatic with a torque converter multiplies the engine torque further when it is stalled, and the tool does not cover that. If you have an automatic, take the result as the gearing only, and do not compare it directly with a manual.
Changing the gearing
Because the crawl ratio is a product, changing any one ratio changes it in direct proportion. In the Ford example, replacing the 3.73 axle with a 4.10 axle gives 2.46 × 2.72 × 4.10 = 27.43 to 1, about 10% more. This is our own arithmetic. You can enter any positive figure in the tool, including 1 for a vehicle with no transfer case.
Using the calculator
Find the ratios in your manuals or on the part tags, enter them, and read the crawl ratio. Try a different axle gearing to see how much it raises the figure. Remember that a higher ratio is not always better.
Ring and pinion examples
A ring gear with 41 teeth and a pinion with 11 teeth give an axle ratio of 41 ÷ 11 = 3.727 to 1. With the Ford first gear of 2.46 and low range of 2.72, the crawl ratio is 24.94 to 1, a little below the 24.96 that the rounded 3.73 gives. The tool shows the axle ratio it worked out, so you can see where the number came from, and it rounds the crawl ratio to two decimals and to the nearest tenth.
Why the transfer case matters
Take the Rubicon-style example, which has a first gear of 4.46 and an axle of 4.10. With the low range of 4.0, the crawl ratio is 73.1 to 1. With a low range of 2.72 instead, it would be 4.46 x 2.72 x 4.10 = 49.74 to 1, our own arithmetic. The deep low range of the transfer case accounts for much of the difference, since low range exists to give much slower speeds and more axle torque [3].
Common mistakes
- Leaving out the transfer case. Enter 1 if the vehicle has none.
- Mixing up ring and pinion. The axle ratio is ring teeth divided by pinion teeth.
- Expecting tyre size to change it. The formula does not include it.
- Taking one guide as a rule. The sources disagree on the bands.
What next
Use this often? Add Crawl Ratio to your Home screen.
Frequently asked questions
What is a crawl ratio calculator?
A tool that multiplies the first-gear ratio, the transfer case low-range ratio and the axle ratio to give the overall low-speed gearing of a vehicle.
What is the crawl ratio formula?
Crawl ratio = first gear x transfer case low range x axle ratio.
How do I find the axle ratio?
Divide the ring gear teeth by the pinion teeth, for example 41 divided by 11 = 3.727 to 1.
What is a good crawl ratio?
It depends on the use. As a rule of thumb, 40 to 50 suits moderate trails and 60 to 80 suits technical rock crawling, but there is no official standard.
Does tyre size change the crawl ratio?
Not in the formula. The crawl ratio is gearing only, and the tool does not include tyre size or engine torque.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.