Saved

Press the star next to a tool's name to save it.

All my tools

Coordinates Converter

Paste a latitude, a longitude or both, in any common format. The coordinates converter shows them in decimal degrees, degrees and decimal minutes, and degrees, minutes and seconds, ready to copy into a map or GPS.

Decimal degrees, DMS or degrees and decimal minutes. Use a minus sign or N, S, E, W.

You can convert a latitude, a longitude or both.

Decimal degrees

–

Enter a latitude or longitude.

The coordinates converter changes latitude and longitude from one format to another. Paste coordinates in decimal degrees (40.7128, -74.006), degrees, minutes and seconds (40° 42' 46.1" N) or degrees and decimal minutes (40° 42.768' N), and it shows them in all three formats with the right N, S, E or W. It’s handy when a map, a GPS, a hiking guide and a website each use a different format. For example, 32° 18' 23.1" N, 122° 36' 52.5" W is 32.30642, -122.61458 in decimal degrees.

The three coordinate formats

MapTools describes the three common formats:

  • Degrees, minutes and seconds (DMS): 32° 18' 23.1" N. The most common format on printed maps, and the most cumbersome to work with.
  • Degrees and decimal minutes (DDM): 32° 18.385' N. The format most electronic navigation equipment uses.
  • Decimal degrees (DD): 32.30642° N, or +32.30642. The format most computer mapping systems display.

Like time, there are 60 seconds in a minute and 60 minutes in a degree.

How to use the coordinates converter

  1. Enter the latitude in the first box and the longitude in the second. You can convert just one.
  2. Use any format: 40.7128, 40 42 46.1 N, 40° 42.768' N or -74.006 all work. Spaces can replace the °, ' and " symbols.
  3. Press Convert to see all three formats, then copy the result.

How the conversion works

DMS to decimal degrees: degrees + minutes ÷ 60 + seconds ÷ 3,600. For 32° 18' 23.1": 32 + 18 ÷ 60 + 23.1 ÷ 3,600 = 32.30642°.

Decimal degrees to DMS: the whole number is the degrees. Multiply the decimal part by 60: the whole number is the minutes. Multiply what’s left by 60 again for the seconds. 0.30642 × 60 = 18.385 minutes, and 0.385 × 60 = 23.1 seconds.

Degrees and decimal minutes stop after the first step: 32° 18.385'.

Signs and hemispheres

MapTools explains that positive latitudes are north of the equator and negative ones south. For longitude, most programs use negative values for west, though a few use the opposite, so it’s worth checking. The converter accepts either a minus sign or a letter: -122.61458 and 122.61458 W mean the same place. Latitude runs from -90 to 90 and longitude from -180 to 180; the converter rejects values outside those ranges, and an E or W on a latitude, or an N or S on a longitude.

Worked examples

  • New York City: 40.7128, -74.0060 is 40° 42' 46.1" N, 74° 0' 21.6" W, or 40° 42.768' N, 74° 0.360' W.
  • MapTools’ example: 32° 18' 23.1" N, 122° 36' 52.5" W is 32.30642, -122.61458, or 32° 18.385' N, 122° 36.875' W.

How precise should coordinates be?

Each format can be shortened or lengthened. The converter shows five decimal places of a degree, three of a minute and one of a second, which is enough to pick out a spot to within a few meters, plenty for a mailbox, a trailhead or a campsite. Survey-grade work needs more precision and the right map datum.

Which format should I use?

MapTools suggests using whatever format the people, maps and software you’re working with have agreed on. Most phones and online maps accept decimal degrees, GPS units can be set to any format, and nautical charts and many older maps are marked in degrees, minutes and seconds.

Common mistakes

  • Mixing up latitude and longitude. Latitude (north–south) usually comes first. If a place lands in the wrong hemisphere or the ocean, the two may be swapped.
  • Dropping the minus sign. Forgetting the minus on a western longitude puts a US location in Asia. Use W or a minus sign, but not both.
  • Treating minutes as decimals. 40° 30' is 40.5°, not 40.30°, because 30 minutes is half a degree.
  • Mixing formats in the same list of coordinates, which makes it easy to misread one.

Entering coordinates

You can type the degree, minute and second symbols or simply use spaces: 40 42 46.1 N is read the same as 40° 42' 46.1" N. Put the hemisphere letter before or after the numbers. Decimal commas aren’t accepted, so use a point, as in 40.7128. If you only have one value, such as the latitude of a city, leave the other box empty.

Why longitude needs care

Lines of latitude run parallel around the globe, but lines of longitude meet at the poles. A degree of latitude therefore stays about the same size everywhere, while a degree of longitude gets narrower the farther you are from the equator. In practice this means a longitude written with too few decimal places can be noticeably off near the equator, so keep the full precision the converter gives when you copy coordinates between apps.

Using the result

Copy the signed decimal pair, such as 40.71280, -74.00600, into most phone map apps and websites. Use degrees and decimal minutes for many handheld GPS units and boat plotters, and degrees, minutes and seconds to match paper maps and charts. Whatever format you share, include the hemisphere letters or signs so nobody has to guess.

Privacy

The conversion happens in your browser. The coordinates you type aren’t sent anywhere or saved, so you can convert the location of your home or a private site without sharing it.

For other angle units, try the angle converter. Find the distance between two places with the distance calculator between cities, or convert distances with the length converter.

What next

Use this often? Add Coordinates to your Home screen.

Frequently asked questions

How does the coordinates converter change DMS to decimal degrees?

It adds the degrees, the minutes divided by 60 and the seconds divided by 3,600, and makes the result negative for south or west.

What is 40° 42′ 46.1″ N in decimal degrees?

About 40.71280. The decimal part is 42 ÷ 60 + 46.1 ÷ 3,600.

Is west longitude negative?

In most programs, yes. Negative longitude is west of Greenwich and negative latitude is south of the equator.

What is the difference between DMS and DDM?

DMS splits a degree into minutes and seconds (18′ 23.1″); DDM keeps decimal minutes (18.385′), which GPS units often use.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters