A telescope magnification calculator divides the focal length of the telescope by the focal length of the eyepiece. Add the aperture and it gives the focal ratio, the exit pupil, the Dawes resolution limit and the light grasp, and the true field of view with an eyepiece's apparent field.
How to use the telescope magnification calculator
- Choose inches or millimetres for the telescope.
- Enter the telescope focal length and the eyepiece focal length in millimetres.
- Add the aperture and the eyepiece's apparent field of view if you want the other results.
- Press Calculate.
Magnification
The page on magnification gives the angular magnification of an optical telescope as MA = −f_o ÷ f_e, where f_o is the focal length of the objective and f_e that of the eyepiece [1]. The minus sign means that the image is inverted, which we read from the page's wording. The calculator shows the size of the magnification, so a 1,200 millimetre telescope with a 25 millimetre eyepiece gives 48 times.
Focal ratio
The focal ratio is the focal length divided by the aperture, written f/8 for a ratio of 8. This is the standard definition, and our own statement. A 150 millimetre aperture with a 1,200 millimetre focal length gives f/8. A low ratio, such as f/5, gives a wide field and a bright image at a given magnification, and a high ratio, such as f/10, a narrower one.
Exit pupil
The page on the exit pupil says that for a telescope the diameter of the exit pupil can be calculated by dividing the focal length of the eyepiece by the focal ratio [2]. For binoculars, it is the diameter of the objective lens divided by the magnification [2]. The two agree, since the magnification is the telescope's focal length divided by the eyepiece's. In the example, 25 ÷ 8 = 3.125 millimetres.
Matching the eye
The same page says that a dark-adapted eye has a pupil of just over 7 millimetres on average, which is the figure for 7 × 50 binoculars, whose exit pupil is 7.14 millimetres [2]. If the exit pupil is larger than your own pupil, some of the light cannot enter the eye. We use 7 millimetres as a typical value in our warning and in the light grasp, but the pupil narrows with age.
Resolution
The page on angular resolution gives the Rayleigh criterion as θ ≈ 1.22 λ ÷ D [3]. It also gives the Dawes limit as θ = 4.56 ÷ D, with D in inches and θ in arcseconds, for light of a wavelength of about 562 nanometres [3]. The calculator uses the Dawes limit. A 150 millimetre aperture, which is 5.9 inches, gives 0.77 arcseconds.
Seeing and the practical limit
The Dawes limit is a theoretical value for a perfect telescope and steady air. In practice, the air, the mirror and the focus limit the detail, and for most observers the atmosphere is the main limit. The page quotes a case of yellow light of 580 nanometres, where a resolution of 0.1 arcsecond needs a 1.2 metre aperture [3], which shows how large an aperture is needed.
Light grasp
The light that a telescope collects grows with the area of its aperture, so with the square of the diameter. The calculator compares the aperture with a 7 millimetre pupil, which gives (D ÷ 7)². For 150 millimetres, this is about 459 times. This is our own working, and it ignores losses in the optics, so the real gain is smaller.
True field of view
The apparent field of view of an eyepiece is the angle that its image seems to cover. The true field of view of the telescope is that angle divided by the magnification. This is the standard relation and our own working, since the pages that we read do not state it. With 52 degrees and 48 times, the true field is 1.08 degrees, about twice the width of the Moon.
Choosing an eyepiece
A long focal length gives a low magnification, a wide field and a large exit pupil, which suits star clusters and large nebulae. A short focal length gives a high magnification and a small exit pupil, which suits the Moon and planets. Try several focal lengths in the calculator, and keep the exit pupil between about 0.5 and 7 millimetres, which is our own rule of thumb, not a figure from the pages.
Using the calculator
Pick the unit, enter the two focal lengths, and add the aperture to see the other results. The eyepiece focal length is always in millimetres, as printed on the eyepiece. A barlow lens changes the effective focal length, so multiply the telescope's focal length by its factor before you enter it. For binoculars, you can enter the aperture and use the magnification printed on them.
Binoculars and spotting scopes
The same arithmetic works for binoculars, where the magnification is printed on the body. A pair of 7 × 50 binoculars has an aperture of 50 millimetres, so the exit pupil is 50 ÷ 7 = 7.14 millimetres [2]. Enter 50 for the aperture in metric mode and a telescope focal length that gives a magnification of 7 with your eyepiece to see the same figures. The Dawes limit is a good guide to the finest detail that the aperture could show.
Common mistakes
- Entering the eyepiece length in inches. It must be in millimetres.
- Using the aperture in place of the focal length. The magnification needs the focal length.
- Expecting the Dawes limit in a poor sky. Seeing limits the detail.
- Forgetting the barlow factor. It multiplies the focal length.
What next
Use this often? Add Telescope Ma to your Home screen.
Frequently asked questions
What is a telescope magnification calculator?
A tool that finds the magnification of a telescope and an eyepiece, with the exit pupil, resolution and field of view.
How do I calculate telescope magnification?
Divide the telescope's focal length by the eyepiece's focal length.
How do I calculate the exit pupil?
Divide the aperture by the magnification, or the eyepiece focal length by the focal ratio.
How do I find the telescope field of view?
Divide the eyepiece's apparent field of view by the magnification.
What is the Dawes limit?
An estimate of the smallest angle that a telescope can resolve: 4.56 arcseconds divided by the aperture in inches.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.