A camera field of view calculator tells you how much of a scene a lens will capture. Pick a sensor, enter the focal length of the lens, and you get the horizontal, vertical and diagonal angles of view, the crop factor and the equivalent focal length on a full-frame camera. Two more modes find the focal length that you need for a wanted angle and the magnification at a given distance. It runs in your browser.
How to use the camera field of view calculator
- Choose angle of view, focal length for an angle or magnification.
- Pick the sensor, or enter its size.
- Enter the focal length, the wanted angle, or the subject distance.
- Press Calculate.
The angle of view
The Wikipedia article on the angle of view in photography gives the formula for a rectilinear lens focused at infinity as α = 2 arctan(d ÷ 2f), where d is the size of the sensor in the direction that is measured, and f is the focal length.[1] For the 35 mm format, which is 36 mm wide and 24 mm high, d is 36 mm for the horizontal angle and 24 mm for the vertical angle. The page works out a 50 mm lens: the horizontal angle is 2 arctan(36 ÷ 100) = 39.6 degrees, the vertical angle is 27.0 degrees, and the diagonal angle, from the diagonal of 43.3 mm, is 46.8 degrees.[1] The calculator gives these three angles for any lens and sensor.
Crop factor
The article on the crop factor says that the most commonly used definition is the ratio of the diagonal of a 35 mm frame, 43.3 mm, to the diagonal of the image sensor in question.[2] A sensor with a smaller size has a crop factor of more than 1 and sees a narrower angle with the same lens. The page's table lists the crop factor of a full frame as 1.0, Canon APS-C 22.2 × 14.8 mm as 1.6, the general APS-C of 23.7 × 15.6 mm as 1.5, Four Thirds as 2.0, the 1 inch sensor as 2.7 and the 1/2.3 inch sensor as 5.6.[2] The calculator works out the factor from the size that you pick, and it shows the more exact figures, such as 1.62 for the Canon sensor.
Equivalent focal length
The page says that multiplying a focal length by the crop factor gives the focal length that would give the same field of view on the full-frame reference. Its example is a 50 mm lens on a sensor with a crop factor of 1.6, which gives the same field of view as an 80 mm lens on the reference format.[2] This is why photographers say that a 50 mm lens on an APS-C camera acts like an 80 mm lens. You can enter a crop factor yourself if you want to use the rounded figure, and the calculator uses it in place of the one from the sensor. The equivalent focal length matches the angle of view only. It does not make the depth of field or the exposure the same.
Finding the focal length for an angle
The second mode turns the formula around. For a wanted angle α in one direction, the focal length is f = d ÷ (2 tan(α ÷ 2)). On a full-frame camera, a horizontal angle of 40 degrees needs a focal length of 36 ÷ (2 tan 20°), which is 49.5 mm. You can choose the horizontal, the vertical or the diagonal angle. This helps when you are choosing a lens for a scene, such as a room that you must fit in the frame from a set distance, or for a security camera with a given area to cover.
Magnification and focusing close
The article on magnification says that the optical magnification is the ratio between the size of an image and the size of the object, and that in photography it is M = f ÷ (d₀ − f), where d₀ is the distance from the object to the lens.[3] At a distance of 0.5 m with a 50 mm lens, M = 50 ÷ 450 = 0.111, which is a reproduction ratio of 1:9, and a subject that is 100 mm long makes an image of 11.1 mm on the sensor. The page on the angle of view adds that, when you focus on a nearby subject, the effective focal length grows to f = F(1 + m), and its example is that a magnification of 1:2 gives f = 1.5F, which reduces the angle of view by 33 percent.[1] The calculator shows the effective focal length, which is 55.6 mm here.
Worked examples
A 24 mm lens on a full-frame camera sees 73.7 degrees horizontally. A 200 mm lens sees 10.3 degrees. On a Four Thirds camera with a 25 mm lens, the horizontal angle is the same as that of a 50 mm lens on full frame, 39.6 degrees, since the crop factor is 2. A phone with a 1/2.3 inch sensor and a lens of 4.5 mm has a crop factor of 5.6, and an equivalent focal length of 25 mm. These are the kinds of comparisons that the calculator makes at once.
Using the angle of view
A wide angle, above 60 degrees, is useful for landscapes, interiors and architecture. A normal angle, about 40 to 50 degrees, matches how the eye sees a scene. A narrow angle, below 20 degrees, brings distant subjects closer, as in sports and wildlife photography. Video, drones and security cameras use the same formulas. Because the angle depends on the sensor, the same lens can be wide on one camera and normal on another.
Common mistakes
- Using the sensor diagonal for the horizontal angle. Each direction has its own angle.
- Assuming that equivalent means identical. Depth of field and light differ.
- Ignoring focusing distance. Close focus narrows the angle.
- Mixing millimeters and meters. Focal length and sensor size are in millimeters, and distance is in meters.
What next
Use this often? Add Camera Field to your Home screen.
Frequently asked questions
What is a camera field of view calculator?
A tool that gives the angle of view of a lens from its focal length and the sensor size, with the crop factor and equivalent focal length.
What is the angle of view formula?
α = 2 arctan(d ÷ 2f), where d is the sensor size in that direction and f is the focal length. A 50 mm lens on full frame sees 39.6° horizontally.
What is the crop factor?
The diagonal of a 35 mm frame, 43.3 mm, divided by the diagonal of the sensor. Canon APS-C is about 1.6.
What is the equivalent focal length?
The focal length multiplied by the crop factor. A 50 mm lens on a sensor with a crop factor of 1.6 gives the field of view of an 80 mm lens on full frame.
How do I find the magnification of a lens?
M = f ÷ (d₀ − f), where d₀ is the distance to the subject. At 0.5 m with a 50 mm lens it is 0.111, or 1:9.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.