Saved

Press the star next to a tool's name to save it.

All my tools

DPI Calculator (Gaming Mouse)

Enter your mouse DPI and in-game sensitivity to get your eDPI and how far your mouse travels for a full turn. You can also match your feel in another game.

Restored your last values ·

Game values come from community measurements, so treat them as a starting point.

eDPI

800

Enter your settings to see your eDPI.

See full result

DPI and eDPI

DPI is how many counts your mouse reports for each inch you move it. In-game sensitivity then scales those counts. eDPI multiplies the two, so you can compare settings between players in the same game.

eDPI = mouse DPI × in-game sensitivity

cm/360

cm/360 is how far you move your mouse to spin a full circle. It’s the most useful number, as it works across different games.

Inches per 360° = 360 ÷ (yaw × sensitivity × DPI)

Yaw is how many degrees a game turns you per mouse count at a sensitivity of 1.

Worked examples

GameDPI × sensitivitycm/360
CS2800 × 151.95 cm
Valorant800 × 0.440.82 cm
Overwatch800 × 443.30 cm

How accurate is this?

Game makers rarely publish yaw values. These are the widely used community figures, and a game update could change them, so treat your result as a close starting point and fine-tune it in practice. Mouse settings and acceleration can also change the feel.

Looking for photo DPI?

This tool is for gaming mice, not photos. To resize a photo to exact dimensions, such as 213 × 213 pixels, use the image resizer. To fit a photo’s shape, try the aspect ratio calculator.

How to use the DPI calculator

  1. Enter your Mouse DPI. Use the number set in your mouse software, from 50 to 50,000. If your mouse has a DPI button, check which step is active.
  2. Enter your In-game sensitivity. Copy it from the game’s mouse or controls menu. It must be above 0.
  3. Choose Your game. Pick CS2, Valorant or Overwatch. The game decides how far the view turns for each mouse count.
  4. Choose Match it in. Pick the game you want to move to. You can pick the same game, which simply returns your own sensitivity.
  5. Press Calculate. The big number is your eDPI. Below it you see centimeters and inches per full turn, and the sensitivity that gives the same feel in the other game.

Use Copy result or Share to send your settings to a friend or a teammate. Reset puts the form back to its starting values.

Worked example: moving from CS2 to Valorant

You play CS2 at 400 DPI with a sensitivity of 2 and want to try Valorant without relearning your aim.

  • eDPI: 400 × 2 = 800
  • Inches per 360°: 360 ÷ (0.022 × 2 × 400) = 20.45 in
  • Centimeters per 360°: 20.45 × 2.54 = 51.95 cm
  • Same feel in Valorant: 2 × 0.022 ÷ 0.07 = 0.629

Set Valorant to 0.629 and keep the mouse at 400 DPI. A full turn then takes the same hand movement as before, using the yaw figures the tool works with. If the game’s menu takes fewer decimals, round to the nearest value it allows.

Changing DPI without changing your aim

Turn distance depends on DPI multiplied by sensitivity. If you double one and halve the other, the result stays the same. In CS2, 1,600 DPI at a sensitivity of 0.5 gives an eDPI of 800 and 51.95 cm per turn, exactly like 400 DPI at 2. That is handy when you buy a new mouse, or want a higher DPI so your desktop pointer moves faster, but you don’t want your game aim to change.

The quick rule: new sensitivity = old sensitivity × old DPI ÷ new DPI. Enter the new pair in the calculator to confirm the turn distance matches before you start a match.

Why eDPI only compares players in one game

eDPI ignores yaw, so the same eDPI feels very different from one game to the next. Look at these two setups:

GameDPI × sensitivityeDPIDistance per 360°
Overwatch800 × 54,00034.64 cm
Valorant1,600 × 0.2540032.66 cm

The Overwatch eDPI is ten times higher, yet both players move their mouse about the same distance for a full turn. Use eDPI to compare with other players of your own game, and use cm/360 to compare across games.

How to read cm/360

A larger cm/360 means a slower sensitivity: you move the mouse further for each turn, which gives finer control for small aim changes. A smaller number means quicker turns with less arm movement. A simple check is your mouse pad. If one full turn needs more distance than your pad is wide, you’ll have to lift the mouse partway through a turn, which some players like and others don’t.

The calculator rounds centimeters and inches to two decimals and the matched sensitivity to three. The eDPI shows up to one decimal, so 450 × 1.25 shows as 562.5.

Limits of the DPI calculator

  • It covers three games: CS2, Valorant and Overwatch.
  • It uses your normal, unscoped sensitivity. Zoom, scope and aim-down-sights multipliers aren’t included.
  • The maths assumes each mouse count turns the view by the same amount, so it doesn’t model mouse acceleration.
  • It doesn’t deal with photo or print DPI. To set a picture’s DPI, use the image DPI changer.

Common mistakes

  • Typing eDPI in the DPI box. Enter DPI and sensitivity separately, and the tool multiplies them.
  • Copying a pro player’s eDPI from another game. Convert it with Match it in, or compare cm/360 instead.
  • Forgetting the DPI button. If your mouse cycles DPI steps, the step you think you’re on may not be the one in use.

How we calculate this

eDPI is your mouse DPI × in-game sensitivity. It lets you compare setups that use different DPI settings.

The tool also finds how far you must move the mouse for a full 360 degree turn: inches = 360 ÷ (yaw × sensitivity × DPI). Yaw is the number of degrees the view turns per mouse count at sensitivity 1. The tool uses 0.022 for CS2, 0.07 for Valorant and 0.0066 for Overwatch. These are community-measured figures, not values the games publish. Centimeters are inches × 2.54.

To match another game at the same DPI, the new sensitivity = current sensitivity × current yaw ÷ target yaw. DPI must be between 50 and 50,000 and sensitivity between 0 and 1,000.

What next

Use this often? Add DPI Calculat to your Home screen.

Frequently asked questions

What is eDPI?

It’s your mouse DPI multiplied by your in-game sensitivity. 800 DPI at a sensitivity of 1 is an eDPI of 800.

What does cm/360 mean?

It’s how far you move your mouse, in centimeters, to turn a full circle in a game. A higher number means a slower sensitivity.

How do I match my sensitivity in another game?

Pick your current game and the new one. At the same DPI, the calculator shows the sensitivity that gives the same turn distance, based on community yaw values.

Is it for photo DPI?

No, it’s for gaming mice. To change a photo’s size, use the image resizer.

Does the DPI calculator keep my aim the same if I change DPI?

Yes, if you keep DPI times sensitivity the same. For example, 400 DPI at 2 and 1,600 DPI at 0.5 both give an eDPI of 800 and 51.95 cm per turn in CS2.

Why is my Overwatch eDPI so much higher than in Valorant?

Each game turns a different amount per mouse count. eDPI ignores that, so it only compares players within one game. Compare cm/360 across games instead.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools