An angle converter changes an angle from one unit to another. The degree is the unit most people use, but radians are the standard in maths and physics, and surveyors, astronomers and engineers also use gradians, arcminutes and arcseconds. One degree is 0.0174533 rad, because a full circle is 360 degrees or 2π radians.
Degrees to radians formula
Radians = degrees × 0.0174533
The number comes from the definition of the degree: one degree is π/180 of a radian. To go the other way, multiply radians by 57.2958, which is 180 ÷ π.
How to use the angle converter
- Enter the angle. Decimals such as 22.5 are fine.
- Choose the units. From starts at degrees and To at radians. Pick any pair, or press Swap units.
- Read the result. The converted angle appears straight away, with the same angle in every other unit below it.
Worked example
A right angle is 90 degrees. Multiply 90 by the factor above and you get 1.5708 rad, which is π/2. A straight line, 180 degrees, is 3.1416 rad, or π. Half of a right angle, 45 degrees, is 0.785398 rad.
Degrees to radians chart
These are the angles that come up most often in geometry and trigonometry.
| Degrees (°) | Radians (rad) |
|---|---|
| 1° | 0.0174533 rad |
| 15° | 0.261799 rad |
| 30° | 0.523599 rad |
| 45° | 0.785398 rad |
| 60° | 1.0472 rad |
| 90° | 1.5708 rad |
| 120° | 2.0944 rad |
| 180° | 3.1416 rad |
| 270° | 4.7124 rad |
| 360° | 6.2832 rad |
The angle units explained
- Degree (°). One 360th of a full turn. Used for everyday angles, maps and compass bearings.
- Radian (rad). The angle where the arc is as long as the radius. Calculators, programming languages and physics formulas usually expect radians.
- Gradian (grad). One 400th of a full turn, so a right angle is exactly 100 gradians. Some surveying instruments use it.
- Arcminute (′) and arcsecond (″). One degree is 60 arcminutes, and one arcminute is 60 arcseconds. Astronomers and map makers use them for very small angles.
- Turn. One full rotation, 360 degrees.
Angles on a clock face
A clock is a handy way to picture degrees. The 12 hour marks split the circle, so each hour is 30 degrees, and each minute mark is 6 degrees. At 3:00 the hands are 90 degrees apart. Between the marks the hour hand keeps moving, by half a degree every minute, so at 3:30 the angle between the hands is 75 degrees, not 90. Work out the angle in degrees this way, then use the converter if you need it in radians.
Radians or degrees on your calculator?
A common mistake is working out sin, cos or tan with the calculator in the wrong mode. If sin(90) gives 0.894 instead of 1, the calculator is in radians. Convert the angle first, or switch the calculator's mode, and check with an angle you know, such as sin(90°) = 1.
Where the angle converter’s factors come from
NIST’s Guide to the SI lists the radian as the SI unit of plane angle, with the symbol rad. In base units it is m/m, a length divided by a length.[2] NIST calls the radian a special name for the number one, used to show what kind of quantity a value is.[2] That is why an angle in radians is often written as a plain number.
NIST’s chapter on units outside the SI gives exact values for the degree, the minute of arc and the second of arc:[1]
- 1° = (π/180) rad
- 1′ = (1/60)° = (π/10 800) rad
- 1″ = (1/60)′ = (π/648 000) rad
The converter stores every unit as a number of degrees: 1 for the degree, 57.2957795130823 for the radian (180 ÷ π), 0.9 for the gradian, 1/60 for the arcminute, 1/3,600 for the arcsecond and 360 for the turn. To convert, it divides the From unit’s figure by the To unit’s figure and multiplies your angle by the result. That factor is the number shown in the formula line under the answer.
One right angle in every unit
Enter 90 with From set to degrees and the table under the result shows the same angle in all six units:
| Unit | 90 degrees is |
|---|---|
| Radians | 1.5708 rad |
| Gradians | 100 grad |
| Arcminutes | 5,400′ |
| Arcseconds | 324,000″ |
| Turns | 0.25 turn |
More worked examples
- Radians to degrees: 1.5 rad × 57.2958 = 85.9437°.
- Gradians to degrees: 50 grad × 0.9 = 45°.
- A full turn: 1 turn is 6.2832 rad, 400 grad or 1,296,000″.
- A tiny angle: 1″ is 0.00000484814 rad, so arcseconds are handier for very small angles.
- Degrees, minutes and seconds: to enter 23° 26′ 24″, add the parts as degrees first: 23 + 26 ÷ 60 + 24 ÷ 3,600 = 23.44. Then 23.44° converts to 0.409105 rad, or 84,384″.
How results are rounded
Answers of 1 or more show up to four decimal places, so 1.5 rad shows as 85.9437°. Answers below 1 show six significant figures, so tiny angles never round to zero. The calculation itself keeps full precision. If you press Swap units, the converted value moves into the Value box rounded to ten significant figures, so swapping back gives the angle you started with.
Common mistakes
- Typing minutes as decimals. 23° 26′ is not 23.26°. Minutes are sixtieths of a degree, so 23° 26′ is 23 + 26 ÷ 60 = 23.4333°.
- Mixing up radians and gradians. Both can look like rad or grad on a calculator screen. A right angle is 1.5708 rad but 100 grad.
- Rounding π too early. Using 3.14 instead of π gives 1.57 rad for 90° instead of 1.5708 rad, already off in the fourth decimal place. The converter uses the full value.
Limits of the angle converter
- Angles must be above 0. The converter doesn’t accept zero or negative angles. For a negative angle, convert its size and put the minus sign back on the answer.
- One number at a time. It doesn’t read 23° 26′ 24″ in one box. Add the parts as shown above, or use the DMS converter.
- No wrapping round the circle. 450° converts to 7.854 rad, not 1.5708 rad. To bring an angle into the range of one turn, use the coterminal angle calculator.
What next
Use this often? Add Angle to your Home screen.
Frequently asked questions
How do I use an angle converter to change degrees to radians?
Enter the angle in degrees, set To to radians and read the result. The formula is radians = degrees × π/180, so 90 degrees is 1.5708 rad.
How many degrees is 1 radian?
One radian is 57.2958°, which is 180 divided by π.
How many arcminutes are in a degree?
There are 60 arcminutes in one degree, and 60 arcseconds in one arcminute, so a degree is 3,600 arcseconds.
What is a gradian?
A gradian is one 400th of a full turn, so a right angle is 100 gradians and a full circle is 400 gradians.
What is the angle between clock hands at 3:30?
75 degrees. The minute hand is at 180 degrees and the hour hand has moved halfway from 3 to 4, to 105 degrees.
Can the angle converter handle negative angles?
No, it accepts angles above 0 only. Convert the size of the angle, then add the minus sign to the answer. For example, −90° is −1.5708 rad.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.