A moa calculator works with the minute of angle, the unit that shooters use for group size and scope adjustment. It turns a group size at a distance into MOA, shows how large a given number of MOA is at that distance, and works out how many clicks of a scope turret a correction needs.
How to use the moa calculator
- Choose US or metric.
- Choose what to find.
- Enter the size or correction and the distance, and the click value if needed.
- Press Calculate.
What a minute of angle is
A minute of angle is one sixtieth of a degree. Wikipedia says that at 100 yards it subtends a circle with a diameter of 1.047 inches, often rounded to just 1 inch [1]. Because it is an angle, the size it covers grows with the distance: at 200 yards it is twice as large, and at 1,000 yards it is ten times as large. That linear growth is what makes MOA useful for estimating shot groups and scope corrections.
The formulas
A minute of arc is π/10,800 of a radian [1], so the size that an angle covers is s = π × MOA × d ÷ 10,800, with s and d in the same unit. A common approximation for inches and yards is s = MOA × d ÷ 100. The solved form for the angle is MOA = s × 10,800 ÷ (π × d). These rearrangements are our own working. The calculator uses the exact form, converting yards to inches or metres to centimetres first. The constant 10,800 is 180 degrees times 60 minutes.
A worked example
A 10-inch group at 1,000 yards. The distance is 36,000 inches, and MOA = 10 × 10,800 ÷ (π × 36,000) = 0.955. At that distance, 1 MOA covers 10.472 inches. The calculator shows the size of one MOA at your distance in every result, so you can see the scale of a correction at a glance. The size grows in proportion to the distance, so a 10-inch group at 1,000 yards is no worse than a 1-inch group at 100 yards.
Metric distances
Choose metric to enter the size in centimetres and the distance in metres. Wikipedia gives 1 MOA at 100 metres as about 2.908 centimetres [1]; the calculator shows 2.9089 centimetres, from the same formula. At 1,000 metres, 1 MOA is about 29.09 centimetres. The two systems give the same answer for the same angle; only the unit of the group size and the distance differs. Do not mix a distance in yards with a group size in centimetres: choose one system and stay with it.
Size of a given MOA
The second mode goes the other way. Enter an angle in MOA and a distance, and the calculator gives the linear size: the spread that the angle covers at that distance. At 100 yards, 1 MOA is 1.0472 inches. This is useful for judging the precision of a rifle and ammunition, and for checking a manufacturer's claim against your own groups: a gun that shoots 0.5 MOA groups should put its shots into about half an inch at 100 yards, in the ideal case.
Scope clicks
Scope turrets move the point of impact by a fixed angle per click. Wikipedia notes that scopes adjustable in 1/2, 1/4 or 1/8 MOA increments need 2, 4 and 8 clicks per MOA [1]. The third mode takes the size of the correction at a distance, converts it to MOA, and divides by your click value. A correction of 2.1 inches at 200 yards is 1.0027 MOA, which is about 4 clicks of 1/4 MOA, and each click moves the impact 0.5236 inches at that distance.
Rounding clicks
Clicks come in whole numbers, so the calculator shows the nearest whole number and the exact value that it was rounded from. In the example above the exact value is 4.0107. If the exact value is close to a half, think about which way you want to err, and check the result on the target. The size of one click at your distance is also given, so you can estimate the effect of one click more or less. It helps to shoot a second group after the change, to confirm that the point of impact has moved as expected.
MOA and milliradians
Many scopes use milliradians instead. Wikipedia gives 1 milliradian as about 3.438 arcminutes and 1 arcminute as about 0.291 milliradian [2]. The calculator shows the answer in milliradians as well, from the exact relation of 180 × 60 ÷ π ÷ 1,000 = 3.4377. For the 10-inch group at 1,000 yards, 0.955 MOA is 0.278 mil.
Limits and real-world effects
The calculator measures angles only. It does not include bullet drop, wind, the height of the scope above the barrel, or the way that a scope's real click value differs from its label. The click value printed on a turret can be a little off, so measure it with a test at a known distance and use that figure. The result is for learning and quick estimates, not for firing solutions. Real accuracy depends on the rifle, the ammunition, the shooter and the conditions on the day, so treat the numbers as a guide and confirm them on the range.
Common mistakes
- Using 1 inch per 100 yards for long ranges. The 1.047 inch figure matters over distance.
- Mixing inches and metres. Choose US or metric first.
- Confusing a group size with a correction. The correction is measured from the point of aim to the centre of the group.
- Assuming the click value. Check your own scope, since some use mils or other values.
- Ignoring wind and drop. The calculator gives angles only.
What next
Use this often? Add Moa to your Home screen.
Frequently asked questions
What is a moa calculator?
A tool that converts group sizes and corrections at a distance into minutes of angle and scope clicks.
How many inches is 1 MOA at 100 yards?
About 1.047 inches, often rounded to 1 inch.
How many centimetres is 1 MOA at 100 metres?
About 2.909 centimetres.
How do you convert a group size to MOA?
MOA = size × 10,800 ÷ (π × distance), with both in the same unit.
How many clicks are in 1 MOA?
4 clicks for a 1/4 MOA scope, 2 for a 1/2 MOA scope and 8 for a 1/8 MOA scope.
Does the calculator allow for bullet drop and wind?
No. It only converts angles, sizes and clicks.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.