Saved

Press the star next to a tool's name to save it.

All my tools

Construction Cost Calculator

Enter your building’s size and a cost per square foot to estimate what it costs to build, with a contingency and land if you’d like. It starts with a US average, so use a local builder’s rate if you can.

Restored your last values ·

sq ft
ft
ft

The dollar rate starts at the US average from 2024. A local builder’s rate is better.

%

Your result opens on the next page.

Estimated total cost

$356,400

Enter your details to see the estimate.

See full result

How to estimate construction cost

Building cost = area × cost per square foot

Total = building cost + contingency + land

What does it cost to build in the US?

The National Association of Home Builders’ 2024 survey found an average construction cost of $428,215 for a 2,647 square foot home. That’s about $162 per square foot, and it’s the starting rate in this calculator.

It’s a national average that covers construction costs only. Costs differ widely by state and city, and with labor, materials and finish level. Your builder’s quote is the figure to trust.

Worked example

A 2,000 square foot home at $162 per square foot costs $324,000 to build. Add a 10% contingency of $32,400, and the total is $356,400 before land.

SizeAt $162 per sq ftWith 10% contingency
1,000 sq ft$162,000$178,200
1,500 sq ft$243,000$267,300
2,000 sq ft$324,000$356,400
2,500 sq ft$405,000$445,500
3,000 sq ft$486,000$534,600

What to budget for beyond the build

  • Land: add it in the land box. Lot prices vary hugely by location.
  • Contingency: a buffer for surprises. The 10% here is a common planning figure, not a rule.
  • Site work and permits: grading, utility hookups, permits and fees may or may not be in your rate, so ask your builder.
  • Finance costs: a construction loan’s interest adds up during the build.

Building in other cities and countries

Rates in other places can be very different, whether you’re building a duplex in New York, a villa in Dubai or a flat in Mumbai. We don’t list city rates, because they change quickly and depend on the builder. Switch to rupees if you need to, then enter a rate from a local builder or architect. You can size any plot by entering its length and width.

To work out a size first, try the square footage calculator. To see monthly payments, use the mortgage calculator. This is an early estimate, and it’s not a quote.

How to use the construction cost calculator

  1. Pick the currency. US dollars starts with the US average rate. Rupees clears the rate box, so you can type a local builder’s rate.
  2. Choose how to enter the size. Pick Square feet if you know the total floor area. Pick Length and width to size a plot and set the number of floors.
  3. Enter the cost per square foot. Use a rate from a builder or architect near you if you have one.
  4. Set the contingency. It starts at 10%. You can enter anything from 0% to 100%.
  5. Add land if you want it in the total. Leave the box empty if you already own the plot.
  6. Press Calculate. You see the floor area, the building cost, the contingency, the land and the total per square foot.

Worked example: a two-floor house with land

Say your plan is 40 feet by 30 feet on two floors, at the starting rate of $162 per square foot, with a 10% contingency and a lot that costs $80,000.

  • Total floor area: 40 × 30 × 2 = 2,400 sq ft
  • Building cost: 2,400 × $162 = $388,800
  • Contingency at 10%: $38,880
  • Land: $80,000
  • Estimated total cost: $507,680
  • Total per square foot: about $212

The total per square foot includes the contingency and the land, so it’s higher than the rate you typed. It’s useful when you compare two plots or two plans with different sizes.

Worked example in rupees

Say a local builder quotes ₹2,000 per square foot for a 1,200 square foot home. That rate is only an example, so use the quote you get. The building cost is ₹24,00,000, the 10% contingency is ₹2,40,000, and the total is ₹26,40,000, or ₹2,200 per square foot. The result uses Indian digit grouping, with lakhs and crores.

Where the money goes in a new home

The starting rate comes from the National Association of Home Builders’ survey of what builders spend on a typical new single-family home. In that survey, construction costs made up 64.4% of the sale price on average, and the finished lot made up 13.7%.[1] Builder profit was 11.0% of the sale price.[1] That’s why the land box is separate here: the rate covers building the house, not the lot.

The survey also splits the construction cost into the main stages of building.[1]

StageShare of construction cost
Interior finishes24.1%
Major systems rough-ins (plumbing, electrical, HVAC)19.2%
Framing16.6%
Exterior finishes13.4%
Foundations10.5%
Site work7.6%
Final steps, such as landscaping and the driveway6.5%

Site work in the survey includes building permit fees, impact fees, water and sewer inspections, and architecture and engineering.[1] If your builder’s rate leaves any of these out, raise the rate or the contingency to cover them. NAHB notes that its figures are national averages and that the survey is not a perfect tool for estimating costs for a particular house in a particular location.[1]

How to read the estimate

The building cost is the floor area times your rate. The contingency is a share of the building cost only, not of the land. The total adds all three. Treat the result as a first budget for talking to builders and lenders, not as a price. The real cost depends on your design, materials, finishes and site, and on prices when you build.

Common mistakes

  • Counting only the ground floor. With Length and width, set the number of floors so every floor is counted.
  • Using a dollar rate in rupees. The US average means nothing for a home in India. Switch to rupees and enter a local rate.
  • Setting the contingency to zero. A buffer covers surprises, unless your contract fixes the price.
  • Mixing up the rate’s scope. Ask your builder whether the rate covers finishes, permits and site work.

To see what a loan for the total would cost each month, try the EMI calculator. To estimate one part of the job, use the roofing calculator or the flooring calculator.

What next

Use this often? Add Construction to your Home screen.

Frequently asked questions

How much does it cost to build a house per square foot?

NAHB’s 2024 survey works out to about $162 per square foot in construction costs, on average. Your cost depends on your location, design and finishes.

How much does it cost to build a 2,000 square foot house?

At $162 per square foot, about $324,000 before land, or $356,400 with a 10% contingency. Local quotes may be quite different.

Does this include land?

Only if you enter it. The starting rate covers construction costs, so land is a separate box.

Can I use this for 1 BHK or 2 BHK homes in India?

Yes. Switch to rupees and enter the area and a local builder’s rate per square foot. We don’t list city rates, because they vary too much.

What share of a new home’s price is construction cost?

In NAHB’s 2024 survey, construction costs were 64.4% of the average sale price and the finished lot was 13.7%. Builder profit was 11.0%. These are national averages.

Does the contingency apply to the land?

No. The contingency is a share of the building cost only. The land you enter is added to the total as it is.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools