A roofing calculator tells you how much material to buy before you get up on a ladder or ask for a quote. Enter the length and width of your roof, along with its pitch, and this roofing calculator works out the true sloped area, the number of roofing squares, and how many bundles of shingles or roofing sheets you need. It also adds an allowance for waste and, if you enter a price, estimates the material cost. US units are the default, and there's a switch for meters.
How to use the roofing calculator
- Choose your units and your material.
- Enter the length and width of the roof's footprint, including any overhangs.
- Enter the pitch, which is the rise in inches per 12 inches of run.
- Set the waste allowance, or leave it at 15%.
- For sheets, enter the sheet length and the width that each sheet actually covers.
- Add a price if you'd like a cost estimate, then press Calculate.
The roofing formula
- Pitch multiplier = √(1 + (rise ÷ 12)²)
- Sloped area = length × width × pitch multiplier
- Area with waste = sloped area × (1 + waste ÷ 100)
- Squares = area in square feet ÷ 100
- Bundles = squares × bundles per square, rounded up
- Sheets = area ÷ (sheet length × coverage width), rounded up
A worked example
Suppose that your roof has a footprint of 40 by 30 feet, which is 1,200 square feet, and a 6/12 pitch. The multiplier is 1.118, so the sloped area is about 1,341.6 square feet. Adding 15% for waste brings that to about 1,542.9 square feet, or 15.43 squares. At 3 bundles per square, you need 47 bundles, and at $35 per bundle the material costs $1,645. If you were using sheets that are 12 feet long and cover 3 feet of width, you'd need 43 of them.
What is a roofing square?
Roofers measure in squares, because working in square feet gets cumbersome on something as large as a roof. A roofing square covers 100 square feet of roof surface. According to This Old House, one bundle of shingles covers approximately 33 square feet, so you need three bundles for every square. Some heavier products use more bundles per square, so check the label on the product you're buying and change that box if necessary.
Why pitch matters
A sloped roof has more surface than the flat floor area beneath it, and the steeper the roof, the bigger the difference. The pitch multiplier accounts for that extra area.
| Pitch | Multiplier |
|---|---|
| 3/12 | 1.031 |
| 6/12 | 1.118 |
| 9/12 | 1.250 |
| 12/12 | 1.414 |
A simple way to find your pitch is to hold a level horizontally against the roof, measure 12 inches along it, and then measure straight up to the roof surface. That vertical distance is the rise.
How much waste should you allow?
Some material is always lost to cutting around vents, pipes and valleys, and to making ridge caps. This Old House suggests adding an extra 15%, and RoofSnap recommends 10 to 15% for an average roof, with more for complex designs with dormers, hips or steep pitches. A simple gable roof can get by with the lower figure. A cut-up roof with many angles needs the higher one, or even more.
Measuring a more complicated roof
Most houses have more than one roof plane. A plane may be a rectangle, a triangle or a trapezoid, so measure each one separately and add them together. Subtract the area of chimneys and other features that won't be covered. If your roof has several sections with different pitches, run the calculator once for each section and add up the results. Measuring from the ground using the house's footprint is safer than climbing, and you can enter that footprint along with the pitch. Remember to include the overhangs at the eaves and gable ends.
Estimating roofing sheets
Metal and other profiled sheets overlap at the sides, so a sheet's coverage width is usually narrower than its full width. Use the coverage width from the manufacturer's data sheet, since using the full width will leave you short. Sheet length matters as well. If sheets must overlap end to end on a long slope, allow a little extra length for that. Each sheet is rounded up to a whole unit, because suppliers don't sell fractions of a sheet.
Other things to budget for
- Underlayment beneath the shingles or sheets.
- Drip edge and flashing around edges, valleys and chimneys.
- Ridge caps and vents.
- Nails, screws and sealant.
- Removal and disposal of the old roof.
- Labor, which is often a major part of the total cost.
Staying safe
Roof work is dangerous. Use a stable ladder, wear proper footwear and avoid going up in wet or windy conditions. If you are not confident working at height, or if the roof is steep, measure from the ground or leave it to a professional. Ask for written quotes from more than one roofer, and compare the quantities they list with your own estimate.
Common mistakes
- Forgetting the pitch. The flat footprint is always smaller than the roof.
- Leaving out overhangs. They need covering too.
- Ordering exactly the calculated amount. Rounding and waste matter.
Related home calculators
Estimate a base layer with the gravel calculator, plan a slab with the concrete calculator, and work out your walls with the paint calculator.
What next
Use this often? Add Roofing to your Home screen.
Frequently asked questions
How does the roofing calculator work?
It multiplies your roof's footprint by a pitch multiplier, adds waste, and converts the area into squares and bundles or sheets.
How many bundles of shingles are in a square?
Usually three, with each bundle covering about 33 square feet.
How much waste should I add?
About 10 to 15% for an average roof, and more for complex shapes.
What does 6/12 pitch mean?
The roof rises 6 inches for every 12 inches of horizontal run.
Can it estimate roofing sheets?
Yes. Choose Sheets and enter the sheet length and coverage width.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.