Saved

Press the star next to a tool's name to save it.

All my tools

Co2 Grow Room Calculator

Use this CO2 grow room calculator to find how much carbon dioxide to add to raise a sealed room from its current ppm to a target ppm, with the flow rate.

Restored your last values ·

ppm
ppm
min

Choose US or metric units. Enter the room size, or the volume directly, the current CO₂ level and the level you want to reach. Add a time to get a flow rate per minute.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the room size, the current and target CO₂ levels, then press Calculate.

See full result

A CO2 grow room calculator works out how much carbon dioxide you need to add to a sealed grow room to raise it from the current level to a target level, in parts per million. Enter the room size or volume and the two levels. You get the volume of gas in cubic feet or metres and in litres, and a flow rate if you give a time.

How to use the CO2 grow room calculator

  1. Choose US or metric units.
  2. Enter the length, width and height of the room, or its volume.
  3. Enter the current and target CO₂ levels in ppm.
  4. Add the release time if you want a flow rate, then press Calculate.

The formula

Parts per million means one part in one million by volume, so the CO₂ needed is the target level minus the current level, divided by one million, times the volume of the room. This is our own working. The answer is in the same unit as the room volume, so a room in cubic feet gives cubic feet of CO₂. The calculator adds a conversion to litres, which is also our own arithmetic.

The room volume

The volume is the length times the width times the height. A room of 4 feet by 4 feet by 4.375 feet is 70 cubic feet. If you already know the volume, type it in and the dimensions are ignored. For an odd-shaped tent or room, work out an average height and use the volume box, as the calculator only handles box-shaped rooms.

A worked example

For a room of 70 cubic feet with 420 ppm now and 1,200 ppm as the target, the difference is 780 ppm, and 780 ÷ 1,000,000 × 70 gives 0.0546 cubic feet, which is 1.546 litres, using 28.3168 litres per cubic foot. This is our own computation with the formula above. At a target of 1,400 ppm it is 0.0686 cubic feet, 1.943 litres, and at 1,500 ppm, 0.0756 cubic feet, 2.141 litres.

Checking the result

As a sense check, a room of 70 cubic feet needs about 0.05 to 0.07 cubic feet of CO₂, or 1.5 to 2 litres, for targets of about 1,200 to 1,400 ppm from a starting level of 420 ppm. That range is our own calculation, not a published figure, and it shows that a small room needs only a small amount of gas for a single top-up. If you get a result far outside this scale for a similar room, check that the units and the ppm values are entered correctly.

The target level

Extension guidance says CO₂ is typically increased to 700 to 1,500 ppm for most crops, that the best level varies by crop, and that damage was reported on cucumber above 1,500 ppm [1]. The calculator marks 1,200 to 1,500 ppm as a reference band, which is our own choice, and tells you whether your target is below, within or above it. You can choose any target, and growers differ in what they use. The same publication says outdoor air is about 430 ppm and that sealed facilities can fall to 200 ppm, so measure the room first [1]. We also do not set a default for the current level; use a CO₂ meter to read it.

Flow rate

If you enter a time, the calculator divides the CO₂ by the time to give a rate per minute, as a simple division. For the 70 cubic foot room, at 1,500 ppm over 60 minutes, that is 0.00126 cubic feet per minute, or 0.0357 litres per minute. A regulator or a controller is set to a rate like this one, and the same publication notes that a CO₂ sensor is required when injecting CO₂ to prevent crop damage [1]. In a real room, the release time and the rate depend on the equipment.

A metric example

A room of 2 by 2 by 2.5 metres has a volume of 10 cubic metres. Raising it from 420 to 1,200 ppm needs 780 ÷ 1,000,000 × 10 = 0.0078 cubic metres, which is 7.8 litres. A 3 by 3 by 2.5 metre room is 22.5 cubic metres, and going from 420 to 1,500 ppm over 30 minutes needs 24.3 litres, or 0.81 litres per minute. These are our own examples.

What the formula leaves out

The formula fills a sealed room once. It assumes no air leaks out and no plants take up CO₂ while you add it. A real grow room loses gas through vents and gaps, and plants use it, so the real need is higher and continues over time. The result is therefore a minimum for a single top-up. This note is our own working, not a statement on the page.

Safety

Carbon dioxide at high concentration is dangerous, and a leaking tank or a regulator fault can fill a small space. Use a monitor with an alarm, ventilate before you enter, never add gas while people or pets are inside, and follow the maker's guidance for your equipment. The calculator gives a quantity of gas, not a safe level or a safe procedure.

Using the calculator

Pick your units and enter the size of the room. Set the current level from a meter reading and choose the target. Compare 1,200, 1,400 and 1,500 ppm to see how the gas needed grows with the target. Add a release time to see the rate. Round up a little for losses, and recheck the level with a meter after the first run.

Choosing the units

US mode takes feet and gives cubic feet of gas, with litres alongside. Metric mode takes metres and gives cubic metres, with litres alongside. One cubic foot is 28.3168 litres, and one cubic metre is 1,000 litres, which is our own conversion. Tanks and regulators are often marked in litres or in cubic feet, so the calculator gives both. Keep the room and the volume in the same system.

Common mistakes

  • Mixing units. The volume must be in feet or metres, not both.
  • Entering the target below the current level. The target must be higher.
  • Treating the quantity as a continuous rate. It is for one top-up of a sealed room.
  • Ignoring safety. Use a monitor and follow the maker's guidance.

What next

Use this often? Add Co2 Grow Roo to your Home screen.

Frequently asked questions

What is a CO2 grow room calculator?

A tool that finds the volume of carbon dioxide needed to raise a room to a target ppm.

What is the CO₂ formula for a grow room?

CO₂ needed equals the target minus the current ppm, divided by one million, times the room volume.

What CO₂ level do plants need?

Extension guidance gives 700 to 1,500 ppm as the usual range, and this tool marks 1,200 to 1,500 ppm as its reference band.

How much CO₂ does a 70 cubic foot room need?

About 0.0546 cubic feet, or 1.55 litres, to go from 420 to 1,200 ppm.

Is a CO₂ top-up safe to do yourself?

Not without care. Use a monitor, ventilate and follow the equipment maker's guidance.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Everyday Life Tools