The wood beam span calculator tells you how far a wood beam can span between posts on a deck. Choose the species group and the beam size, enter how far the deck joists span from the beam to the house or the next beam, and it looks up the maximum beam span in the deck beam table of the International Residential Code (IRC). Enter your planned post spacing to check it, and the length of the beam to count the posts. For example, a 3-ply 2×10 beam of Douglas fir-larch carrying joists that span 12 ft can span 8 ft 6 in between posts.
Where the spans come from
The spans are from the 2015 IRC, Table R507.6, Deck beam span lengths. The table is for No. 2 grade lumber with a wet service factor, a 40 psf live load and a 10 psf dead load, and beams that carry deck joists from one side only. It has two species groups: Southern pine, and a group covering Douglas fir-larch, hem-fir, spruce-pine-fir, redwood, western cedars, ponderosa pine and red pine. Beams can be built up from two or three pieces of 2× lumber, or be solid 3× or 4× timbers in the second group.
How to use the wood beam span calculator
- Choose US or metric units and the species group.
- Choose the beam size: a built-up beam of two or three 2× boards, or a 4× timber.
- Enter the deck joist span: how far the joists run from this beam to the ledger or the next beam. The calculator uses the table column for that span or the next longer one, up to 18 ft.
- Enter your post spacing to check it, and the beam length to count posts.
Worked example
A deck 12 ft deep from the house, with a 24 ft beam along the outside edge, built from Douglas fir-larch:
- The joists span 12 ft, so use the 12 ft column.
- A 3-ply 2×10 beam can span 8 ft 6 in between posts.
- For a 24 ft beam that means at least 4 posts: one at each end and two between, about 8 ft apart.
- A 4×12 (8 ft 1 in) and a 3-ply 2×12 (9 ft 10 in) also span 8 ft.
With Southern pine, a 2-ply 2×10 spans 7 ft 4 in under 12 ft joists, and a 3-ply 2×10 spans 9 ft 2 in.
Sample spans under 12 ft joists
| Beam | Southern pine | Douglas fir-larch and others |
|---|---|---|
| 2-ply 2×8 | 6 ft 2 in | 4 ft 10 in |
| 2-ply 2×10 | 7 ft 4 in | 5 ft 11 in |
| 2-ply 2×12 | 8 ft 7 in | 6 ft 10 in |
| 3-ply 2×10 | 9 ft 2 in | 8 ft 6 in |
| 3-ply 2×12 | 10 ft 9 in | 9 ft 10 in |
Why joist span changes the beam span
A beam carries half the load of the joists that rest on it. Longer joists bring a wider strip of deck onto the beam, so the beam carries more weight and can’t span as far. That’s why the same 3-ply 2×10 spans 13 ft under 6 ft joists in Southern pine but only 7 ft 6 in under 18 ft joists. If your beam doesn’t reach far enough, add a post, choose a deeper beam, or add a second beam to shorten the joists.
Limits of this calculator
- The table covers beams carrying deck joists from one side only, on decks with the loads above. Beams in the middle of a deck carrying joists from both sides, or decks with hot tubs, heavy snow loads or roofs, need other tables or an engineer.
- Footnote d of the table says a flush beam must be at least as deep as the joists.
- Later editions of the IRC and local codes may have different tables, so check what your building department uses.
- Posts have limits too: the same chapter’s table R507.8 limits a 4×4 post to 8 ft tall, a 4×6 to 8 ft and a 6×6 to 14 ft.
Built-up beams vs. solid timbers
Most deck beams are built up from two or three 2× boards fastened together, which are easy to buy and carry and can be staggered at joints over posts. Solid 4× timbers are an option in the Douglas fir-larch group; the table lists them separately, and they span less than a 3-ply beam of the same depth. Follow your local code or the beam maker’s instructions for fastening the plies together.
Metric units
In metric mode, enter the joist span, post spacing and beam length in meters. The calculator converts them to feet to use the table and shows the spans in meters. The beam sizes stay in their US names, such as 3-ply 2×10, since they are sold that way.
Planning post locations
Post spacing affects more than the beam. Each post needs its own footing, so fewer posts mean fewer holes to dig, but longer spans need deeper beams. Try a few beam sizes in the calculator to compare: a bigger beam with fewer posts can be quicker to build on hard-to-dig ground, while smaller beams with more posts can cost less in lumber. Keep posts at even spacing along the beam, with one at each end.
Look up the joists themselves with the floor joist calculator or plan the boards with the deck calculator, and work out concrete for the post footings with the post hole concrete calculator.
What next
Use this often? Add Wood Beam Sp to your Home screen.
Frequently asked questions
Where does the wood beam span calculator get its spans?
From the 2015 IRC Table R507.6, deck beam span lengths, for No. 2 lumber, 40 psf live load and 10 psf dead load, with joists on one side.
How far can a 3-ply 2×10 deck beam span?
Under 12 ft joists, 8 ft 6 in in Douglas fir-larch and similar woods, and 9 ft 2 in in Southern pine.
How many posts does a deck beam need?
Divide the beam length by its maximum span, round up and add one. A 24 ft beam spanning 8 ft 6 in needs 4 posts.
Why does joist length affect beam span?
Longer joists put more of the deck’s weight on the beam, so it must be bigger or have posts closer together.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.