The floor joist calculator looks up how far a wood floor joist can span, using the floor joist span tables in the International Residential Code (IRC). Choose the joist size (2×6 to 2×12), the species and grade of the lumber, the spacing and the floor’s load, and it shows the maximum span. Enter the span you need and it tells you whether that joist works and lists the other sizes and spacings that do. Enter the floor’s length too and it counts the joists. For example, a No. 2 Douglas fir-larch 2×10 at 16 inches on center can span 15 ft 7 in under a living-area floor.
Where the spans come from
The spans are from the 2015 IRC, Tables R502.3.1(1) and R502.3.1(2). The first is for sleeping areas and attics with a 30 psf (pounds per square foot) live load; the second is for other living areas with a 40 psf live load. Both limit deflection to the span divided by 360, and each gives spans for a 10 psf or 20 psf dead load. The code says to use the AWC span tables for other species, grades and loads. Later editions of the IRC and some local codes have changed some values, so check the tables your building department uses.
How to use the floor joist calculator
- Choose the floor load: 40 psf for living areas, 30 psf for sleeping rooms and attics with fixed stairs.
- Choose the dead load: 10 psf for a typical floor, 20 psf for heavy finishes such as tile or stone.
- Pick the species and grade stamped on the lumber, and the joist size.
- Pick the spacing: 12, 16, 19.2 or 24 inches on center.
- Enter the span you need (the clear distance between supports) to check it, and the floor’s length to count joists.
Worked example
You want to frame a 14 ft span for a family room with No. 2 Douglas fir-larch, a 40 psf live load and a 10 psf dead load:
- A 2×10 at 16 inches spans 15 ft 7 in, so it works.
- A 2×8 at 12 inches spans 14 ft 2 in, which also works.
- A 2×10 at 19.2 inches spans 14 ft 3 in.
- A 2×12 at 24 inches spans 14 ft 9 in.
If the floor is 20 ft long, joists at 16 inches on center need 20 × 12 ÷ 16 + 1 = 16 joists. A bedroom floor with the 30 psf table lets the same 2×10 at 16 inches span 17 ft 5 in.
Sample spans: No. 2 Douglas fir-larch, 40 psf live, 10 psf dead
| Size | 12 in | 16 in | 24 in |
|---|---|---|---|
| 2×6 | 10 ft 9 in | 9 ft 9 in | 8 ft 3 in |
| 2×8 | 14 ft 2 in | 12 ft 9 in | 10 ft 5 in |
| 2×10 | 18 ft 0 in | 15 ft 7 in | 12 ft 9 in |
| 2×12 | 20 ft 11 in | 18 ft 1 in | 14 ft 9 in |
What affects a joist’s span
- Depth: a deeper joist is much stiffer, so moving up one size adds the most span.
- Spacing: closer joists share the load, so each one can span farther.
- Species and grade: Select Structural lumber is stronger than No. 2, and Douglas fir-larch and Southern pine generally span farther than Spruce-pine-fir. No. 3 lumber spans much less.
- Load: heavier floors, such as those with tile or stone, have shorter allowed spans.
Choosing a spacing
16 inches on center is the most common spacing for floors, and it lines up with 4 × 8 ft subfloor sheets. Wider spacing uses fewer joists but needs a thicker subfloor and gives a bouncier feel. Even when a joist meets the code span, many builders choose a deeper joist or closer spacing for a stiffer floor, especially under tile.
Limits of this calculator
The tables apply to simple spans of solid sawn lumber under uniform floor loads. They don’t cover engineered I-joists, notched or cut joists, cantilevers, point loads from walls or heavy items like bathtubs, or decks, which have their own tables. For those, use the manufacturer’s tables or ask a structural engineer, and always follow your local building code.
Species and grade explained
Lumber is graded at the mill and stamped with its species group and grade. The four species groups in these tables are Douglas fir-larch, Hem-fir, Southern pine and Spruce-pine-fir, which together cover most framing lumber sold in the United States. Grades run from Select Structural, the strongest, through No. 1 and No. 2 to No. 3. Most lumberyards stock No. 2 or better for framing, so choose the species and grade printed on the boards you plan to buy, not just the size.
Measuring the span
The span in the tables is the clear distance between the faces of the supports, such as a foundation wall, a beam or a bearing wall. It isn’t the full length of the joist, which also rests on each support. If a beam in the middle of the floor supports the joists, each side is a separate span; enter the longer one. Measure in feet and inches, and if the span falls between two values, use the table value that is equal or greater.
Reading the result
The big number is the maximum span for the joist you selected. If you entered a span, the calculator tells you whether it works and lists up to four other combinations that reach it, starting with the smallest joist and the widest spacing, which usually use the least lumber.
Work out the board feet and lumber cost with the board foot calculator, deck joists and boards with the deck calculator, and the floor area with the square footage calculator.
What next
Use this often? Add Floor Joist to your Home screen.
Frequently asked questions
Where does the floor joist calculator get its spans?
From the 2015 IRC floor joist span tables: R502.3.1(1) for sleeping areas at 30 psf and R502.3.1(2) for living areas at 40 psf.
How far can a 2×10 floor joist span?
A No. 2 Douglas fir-larch 2×10 at 16 inches on center spans 15 ft 7 in for a 40 psf living area with a 10 psf dead load.
How many floor joists do I need?
Divide the floor length in inches by the spacing and add one. A 20 ft floor at 16 inches on center needs 16 joists.
Which load should I use for a bedroom?
The IRC uses a 30 psf live load for sleeping areas and 40 psf for other living areas.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.